Skmei 1065 Watch Owner's manual

Operation Instruction

Functional

In normal display mode shows: week- hour -minute - second

Date display mode: tap S1 button to shows month and date

Alarm time display mode: tap S4 button to shows alarm hour and minute

Modes change: tap S2 button

Analog set: tap S3 ( hold S3 to adjust the analog quartz)

Back-light: tap ‘S1’ button

12/24-hour format

Operation

Set time & date

In normal display Mode, tap S2 three times to enter setting mode and " second" flashing.

Minutes: Tap S4 and the minutes will flash. Tap S1 to adjust minute

Hours: Tap S4 and hour flashing. Tap S1 to adjust hour. (Pay attention to AM/PM, “P” is 12 hour format)

Date: Tap S4 and the date will flashing. Tap S1 to adjust date

Months: Tap S4 and the month flashing. Tap S1 to adjust month (1=January, 2=February ...)

Week: Tap S4 and the week will flashing. Tap S1 to adjust the week (MO=Monday, U=Tuesday ...)

Tap S2 to exit.

Alarm ON/OFF

In normal display Mode, hold tap S1 and then tap S4 display “alarm mark” is turn on the alarm. The same action, “alarm

mark” disappear, it’s turn off the alarm.

Set alarm

Hours: In normal display Mode, tap S2 twice and "the hours" flashing.

Tap S1 to adjust hour of the alarm. Pay attention to AM/PM

Minutes: Tap S4 and the minutes flashing. Tap S1 to adjust minutes.

Chronograph function

In normal display mode: tap S2 once , enter chronograph mode , tap S1 to start, tap S1 to suspend, press S1 to

continue ,press S1 to stop, press S4 to return to chronograph mode(0:00 00)Section, press S1 to start, press S4 to read

the first paragraph record . Press S4 again to read second record.

Skmei watch direct sales

www.skmei-watch.com

Download PDF