media-tech BLUETOOTH EARSET MT3529, MT3533 User manual

  • Hello! I am an AI chatbot trained to assist you with the media-tech BLUETOOTH EARSET MT3529 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
BLUETOOTH EARSET
Instructions Manual
World Smallest BT Earsetphone for Voice Communication
MT3533
To Charge the Battery
Battery must be fully charged before use the  rst
time!
a. Connect the charger cable to charging socket
on headset
b. Plug the charger to a power source
c. Indicator light shows red, when fully charged
the red light is turned o
d. Disconnect charger from headset and from
power source
To Switch the Headset Power on/o
a. To power on: press and hold answer/end key
for about 3 seconds until indicator light  ash-
es blue
b. To power o : press and hold for about 6 sec-
onds, indicator light is turned o
To Pair the Headset with a Bluetooth
Enabled Phone
a. Turn on headset, in standby mode
b. Set the phone to search for Bluetooth device
c. When phone  nds headset, con rm by select-
ing the headset from list
d. Enter passcode 0000 when prompted by
phone
e. Repeat above steps if the pairing was unsuc-
cessful, only need to pair once
f. If pairing was successful, indicator light starts
to  ash blue, indicating in standby mode and
ready to make/receive calls
To Answer a Call
a. Press the answer key on your phone, or
b. Press the answer/end key on headset brie y
To End a Call
a. Press the end key on your phone, or
b. Press the answer/end key on headset brie y
To Reject a Call
a. Press the end key on your phone, or
b. Single press the answer/end key twice (2
short presses) when phone is ringing
To Make a Call
a. Dial the number from your phone, then press
the answer/call key on your phone, call is au-
tomatically transferred to the headset
To Redial the Last Called Number
a. Single press the answer/end key twice (2 short
presses) when headset is in standby mode
To Activate Voice Dialing
a. Your phone must support this function, press
and hold the answer/end key for 3 seconds
when in standby mode
b. Say the name or number to dial, follow User
Guide of your phone, record voice tags
through headset for the best and the most ac-
curate result
To Adjust Volume of Headset
a. Press volume up key on your phone to in-
crease volume
b. Press volume down key on your phone to de-
crease volume
To Store the Headset
a. Power o the headset
b. Temperature range: -10°C/14°F ~ 40°C/100°F
c. Do not expose the headset to rain or any liq-
uids
EN
VOLUME
BUTTON +/-
ANSWER/
END BUTTON
/