Honeywell HY204 Owner's manual

Brand: Honeywell

Model: HY204

Category: Household fans

Type: Owner's manual

This manual is also suitable for

HY-204 Series

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY

INSTRUCTIONS BEFORE USING

THIS FAN

When using electrical appliances, basic

precautions should always be followed to

reduce the risk of fire, electric shock, and

injury to persons, including the following:

FOR US MODELS ONLY – This product em-

ploys overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation.

If the fuse blows, unplug the product from

the outlet. Replace the fuse as per the user

servicing instructions (follow product marking

for proper fuse rating) and check the product.

If the replacement fuse blows, a short-circuit

may be present and the product should be

discarded or returned to an authorized service

facility for examination and/or repair.

1. Use this fan only as described in this manual.

Other use not recommended as it may cause

fire, electric shock or injury to persons.

2. This product is intended for household

use ONLY and not for commercial, industrial or

outdoor use.

3. To protect against electric shock, do not place

fan in window, immerse unit, plug or cord in

water or spray with liquids.

Owner’s Manual

The Honeywell trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.

Honeywell International Inc. makes no representation or warranties with respect to this product.

The Febreze trademark is used by Kaz USA, Inc. under license from The Procter and Gamble Company.

4. This appliance has a polarized plug (one blade

is wider than the other). To reduce the risk

of shock, this plug is intended to fit only one

way in a polarized outlet. If the plug does not

fit fully in the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature.

5. Close supervision is necessary when any

appliance is used by or near children.

6. Turn the fan OFF and unplug the fan from

the outlet when not in use, when moving the

fan from one location to another and before

cleaning.

7. To disconnect the fan, first turn the unit OFF,

grip the plug and pull it from the wall outlet.

Never pull the plug by the cord.

8. Do not operate the fan in the presence of

explosive and/or flammable fumes.

9. Do not place the fan or any parts near an open

flame, cooking or other heating appliance.

10. Do not operate the fan with a damaged cord or

plug or if the product malfunctions, is dropped

or damaged in any manner (see warranty).

11. Avoid contact with moving fan parts.

12. The use of attachments not recommended by

the manufacturer may be hazardous.

13. Place the fan on a dry level surface.

HONEYWELL WITH

FEBREZE FRESHNESS

COOL & REFRESH

MINI TOWER FANS

HY-200 Series

- 2 -

14. Do not hang or mount fan on a wall

or ceiling.

15. Do not operate if the fan housing is damaged.

16. A loose fit between the AC outlet (receptacle)

and plug may cause overheating and a

distortion of the plug. Contact a qualified

electrician to replace loose or worn outlet.

17. Do not operate any fan with a damaged cord

or plug. Discard any damaged fan, return

the fan to the retailer where the fan was

purchased, or request a return authorization

to return to Kaz USA, Inc. for examination

and/or repair.

USER SERVICING INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device.

Do not unplug by pulling on cord.

• If your fan loses power and you suspect that the fuse on your fan

has blown, you should first remove the spare fuse holder attached

to the cord plug (Fig. 1). Remove the spare fuse from the plastic

spare fuse holder, and set the spare fuse aside (Fig. 2).

• You can gain access to the blown fuse by sliding open the door

found on the side of the plug. Slide the door outward until the

blown fuse is fully visible (Fig. 3).

• Carefully remove the blown fuse and snap the replacement fuse

into place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt

fuse (provided with product). Fully close the fuse door by sliding

back into place. Discard the blown fuse. The plug should now be

ready for normal use.

• Risk of fire. Do not replace attached plug. Contains a safety device

(fuse) that should not be removed. Discard product if the attached

plug is damaged.

• If you need further information on how or when to replace the

fuse in the safety plug, please contact Kaz Consumer Relations

Department by visiting our website at www.kaz.com or calling

1-800-477-0457.

Thank you for your purchase.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an

electrical fault occurs. Please see below for more information on how to properly use your fan and

replace the safety plug fuse, if needed.

FUSED SAFETY PLUG - FOR US ONLY

Fig. 1

Fig. 2

Fig. 3

18. Do not run fan cord under carpeting. Do

not cover cord with throw rugs, runners, or

similar coverings. Do not route cord under

furniture or appliances. Arrange cord away

from traffic areas and where it will not be

tripped over.

WARNING: To Reduce The Risk of Fire or

Electric Shock, Do Not Use This Fan With

Any Solid-State Speed Control Device,

other than the one supplied.

- 3 -

FAN OPERATION

On/Off

& Speed

Control

Oscillation

Button

Scent

Control

Dial

Scent

Cartridge

Compartment

On/Off

To turn fan on, turn the fan Speed Control Knob

located on the bottom of the control panel

clockwise.

Speed Control

Turn the fan Speed Control Knob clockwise to

set the Fan at High( ) or Low ( )

Oscillation

To activate the Oscillation feature, press the

Oscillation button ( ) once.

Press the Oscillation button again to turn the

Oscillation feature off.

Once a Febreze

Set&Refresh

scent cartridge has been inserted,

fresh Febreze

scent is released

into the Scent Path and travels to

the interior region of the fan.

At this point, the fresh Febreze

scent combines with the air being

drawn into the fan by the fan motor.

The fan then pushes a stream of

Febreze

scented air out through

the front fan grilles to cool and

freshen your entire room.

The Scent Control Dial allows you to

control the level of scent output.

To operate the fan without scent,

simply remove the Febreze

Set&Refresh

scent cartridge.

HOW IT WORKS

Set&Refresh

Scent Cartridge

Scent Path

Air In

Freshened Air Out

1. Remove the fan from the plastic bag and carton.

2. Place the fan on a dry level surface.

3. Plug the fan into a 120 volt outlet.

See the next two pages for instructions on installing the Febreze

Set&Refresh

scent cartridge.

- 4 -

FAN OPERATION

INSTALL FEBREZE

SET&REFRESH

SCENT CARTRIDGE

If you would like to use the scent distribution feature on your fan, you need to install and activate

a Febreze

Set&Refresh

scent cartridge.

Your Honeywell with Febreze Freshness™ Cool & Refresh Fan package contains one Febreze

Set&Refresh

Advanced Odor Eliminator scent cartridge at the time of purchase.

Make sure your fan is

turned OFF.

1 - Turn Fan Off

Remove the Set&Refresh

scent cartridge from the

enclosed packaging. Do not

peel or cut the cartridge

Open the door to the Scent

Cartridge Compartment

located in the center of the

fan control panel.

Hold the Set&Refresh

scent cartridge so that the

curved side is facing

upward.

Line the cartridge up with

the slot inside the Scent

Cartridge Compartment.

Slide the scent cartridge into

the slot until it is firmly in

place.

Close the door to the Scent

Cartridge Compartment.

2 - Remove Cartridge 3 - Open Cartridge Door

4 - Position Cartridge 5 - Insert Cartridge 6 - Close Cartridge Door

- 5 -

Once the Febreze

Set&Refresh

scent cartridge is properly

installed, use the Febreze

Scent Control Dial located on the

top of the Fan control panel (Fig. 4), to control the amount of

scent released into the air.

Turn the Febreze

Scent Control Dial clockwise to release

increasing amounts of Febreze

scent into the air.

Keep the Scent Control Dial in the LOW position if you want the

minimum amount of Febreze

scent to be released into the air

and circulated by your fan.

Turning the Febreze

Scent Control Dial all the way to the right (MAXIMUM) will release the

maximum amount of Febreze

scent into your room.

PLEASE NOTE:

The speed at which you run your Honeywell with Febreze Freshness™ Cool & Refresh Fan

does affect the length of time your Set&Refresh

scent cartridge will last.

An installed and activated Set&Refresh

scent cartridge will empty faster if you run your

fan at HIGH speed instead of LOW speed.

If you regularly run your fan at LOW speed while a Set&Refresh

scent cartridge is

installed and activated, the Set&Refresh

scent cartridge will last longer.

To operate the fan without any scent, simply remove the scent cartridge from the fan.

Febreze

Set&Refresh

scent cartridges are available in a variety of scents wherever

Set&Refresh

products are sold. Click on the ‘Buy Now’ link on www.Febreze.com to locate a

retailer near you.

CAUTION: EYE IRRITANT. Avoid contact with eyes. Do not put fingers into product vent. Wash

hands after handling perfume cartridge.

KEEP OUT OF REACH OF CHILDREN AND PETS. FIRST AID TREATMENT: Contains fragrance

oils. If eye contact occurs, rinse with plenty of water for 20 minutes. If eye irritation persists,

consult a physician.

IF SWALLOWED; do not induce vomiting, call a physician or poison control center immediately.

CONTROLLING THE FEBREZE

SCENT

Fig. 4

Scent Control

- 6 -

Should I remove the foil from the back of the Set&Refresh

scent cartridge?

No, do not remove the foil from the cartridge. Simply remove the cartridge from its packaging

and place it into the slot in the Scent Cartridge Compartment on the top of the unit. By inserting

the cartridge properly in the fan, the scent cartridge foil will automatically be pierced to release

the Febreze

scent.

How do I insert the scent cartridge?

Hold the scent cartridge so that the curved side is facing upward.

Align the cartridge with the slot inside the Scent Cartridge

Compartment on top of the unit. Slide the cartridge into the slot

until it feels secure.

Why isn’t my fan producing scent anymore?

It may be due to an empty Set&Refresh

scent cartridge. Check the cartridge in the unit; if it is

empty and no longer releasing any scent, it is time to replace the cartridge.

Where can I get additional Febreze

Set&Refresh

scent cartridges?

You can purchase Febreze

Set&Refresh

scent cartridges wherever Set&Refresh

products are

sold. Click on the ‘Buy Now’ link on www.Febreze.com to locate a retailer near you.

My Honeywell with Febreze Freshness™ Cool & Refresh Fan came with an Advanced

Odor Eliminator Set&Refresh

scent cartridge. Is Advanced Odor Eliminator the only

Set&Refresh

scent cartridge that I can use in my fan?

No - you can use any of the variety of scents available in the Febreze

Set&Refresh

scent cartridge assortment. See www.Febreze.com for more information on which scents are

available.

How long will a Set&Refresh

scent cartridge last in my fan?

A single Set&Refresh

scent cartridge may last between 2-4 weeks depending on a variety of

factors, including: · Fan speed used while the scent cartridge is inserted

· Room Size

· Amount of air flow in the room where the fan is operating

NOTE: Operating the fan at higher speeds while a Set&Refresh

scent cartridge is installed will

cause the scent cartridge to empty faster. Similarly, operating the fan at lower speeds while a

Set&Refresh

scent cartridge is inserted will enable the scent cartridge to last for a longer period

of time.

Can my fan be operated without a Set&Refresh

scent cartridge?

Yes, your fan is fully operational as a fan only, without the scent cartridge.

FREQUENTLY ASKED QUESTIONS

- 7 -

CONSUMER RELATIONS

Mail questions or comments to:

Kaz USA, Inc.

Consumer Relations Dept.

250 Turnpike Road

Southborough, MA 01772

Please be sure to specify a model number.

NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST

OR SEE YOUR WARRANTY. DO NOT RETURN TO THE ORIGINAL PLACE OF PURCHASE. DO

NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR

WARRANTY AND CAUSE DAMAGE TO THE FAN OR PERSONAL INJURY.

USER SERVICING INSTRUCTIONS

CLEANING AND STORAGE

• Ensure the fan is turned off and unplugged.

• Remove the Set&Refresh

scent cartridge and discard.

• Use only a soft cloth to gently wipe the outer surfaces of the fan clean.

• To clean between the grills and fan blade area, we recommend using a pipe cleaner,

flexible dust wand, vacuum cleaner or compressed air to gently remove the dust.

• To clean the rear grill use a soft dry cloth.

• DO NOT immerse the fan in water and never allow water to drip into the motor housing.

• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.

• For storage, you may leave the fan assembled and covered to protect it from dust.

Store the fan in a cool, dry place.

Call us toll-free at: 1-800-477-0457

E-mail: consumerrelations@kaz.com

Or visit our website at: www.kaz.com

- 8 -

You should first read all instructions before

attempting to use this product.

A. This 1 year limited warranty applies to

repair or replacement of product found to be

defective in material or workmanship. This

warranty does not apply to damage resulting

from commercial, abusive, unreasonable use

or supplemental damage. Defects that are

the result of normal wear and tear will not

be considered manufacturing defects under

this warranty. KAZ IS NOT LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES

OF ANY NATURE. ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE ON THIS PRODUCT IS

LIMITED IN DURATION TO THE DURATION OF

THIS WARRANTY. Some jurisdictions do not

allow the exclusion or limitation of incidental or

consequential damages or limitations on how

long an implied warranty lasts, so the above

limitations or exclusions may not apply to you.

This warranty gives you specific legal rights,

and you also may have other rights which vary

from jurisdiction to jurisdiction. This warranty

applies only to the original purchaser of this

product from the original date of purchase.

B. At its option, Kaz will repair or replace this

product if it is found to be defective in material

or workmanship. Defective product should

be returned to the place of purchase in

accordance with store policy. Thereafter, while

within the warranty period defective product

may be returned to Kaz.

C. This warranty does not cover damage resulting

from any unauthorized attempts to repair

or from any use not in accordance with the

instruction manual.

D. Return defective product to Kaz USA, Inc. with

a brief description of the problem. Include proof

of purchase and a $10 US/$15.50 CAN check

or money order for handling, return packing

and shipping charges. Please include your

name, address and a daytime phone number.

You must prepay shipping charges. We suggest

having tracking or delivery confirmation.

Send to:

In U.S.A.:

Kaz USA, Inc.

Attn: Returns Department

4755 Southpoint Drive

Memphis, TN 38118

USA

In Canada:

Kaz Canada, Inc.

Attn: Returns Department

510 Bronte Street South

Milton, ON L9T 2X6

Canada

Please go to www.kaz.com and register your

product under the Customer Care Center and

receive product information updates and new

promotional offers.

1 YEAR LIMITED WARRANTY

Page is loading ...

Honeywell HY204 Owner's manual

Brand: Honeywell

Model: HY204

Category: Household fans

Type: Owner's manual

This manual is also suitable for

HY-204 Series

Download PDF

report

in other languages

français: Honeywell HY204 Le manuel du propriétaire
español: Honeywell HY204 El manual del propietario

Honeywell HY204 Owner's manual

This manual is also suitable for

Honeywell HY204 Owner's manual

in other languages

Related papers

Other documents