Antec BXH-200NCWHI User manual

Category
Mobile headsets
Type
User manual

This manual is also suitable for

Antec BXH-200NCWHI is a wireless headset that offers active noise cancellation for an immersive audio experience. It features Bluetooth connectivity for easy pairing with your devices. The headset has built-in controls for adjusting volume, playing music, and answering calls. It also has a built-in microphone for clear communication. The Antec BXH-200NCWHI is perfect for listening to music, making calls, or gaming on the go.

Antec BXH-200NCWHI is a wireless headset that offers active noise cancellation for an immersive audio experience. It features Bluetooth connectivity for easy pairing with your devices. The headset has built-in controls for adjusting volume, playing music, and answering calls. It also has a built-in microphone for clear communication. The Antec BXH-200NCWHI is perfect for listening to music, making calls, or gaming on the go.

Since everyone’s ears are unique, make sure to try out all sizes.
Only with the perfect size of ear tips will you enjoy a snug fit and
optimum sound quality.
Charging for first time use
Charging the battery before use is recommended but not required. The
headphones ship pre-charged however initial charge will vary. Connect
cable to the USB slot of any PC or Mac.
The status indicator will be red while charging and will turn off when
fully charged.
Headset Features
Pair mode
Playing Music
Begin with headphones powered off. Push and hold NC Button for 6-8
seconds until LED indicator alternates red and blue. You are now in
pair mode. See your phone/music device manual for pair instructions.
* Note
- If the pairing is not successful, switch off headphones by pushing the
MFB for 3 seconds, and then re-pair according to the steps outlined
above.
- After pairing is successful, paired devices will remember each other.
Unless pairing information is deleted, there is no need to pair again.
- The headphones will automatically connect with the latest paired
device. If you want to pair with another Bluetooth device, switch off
the Bluetooth function of the current Bluetooth device, and then pair
and connect it with the new Bluetooth device according to steps
outlined above.
Volume Up
Volume Down
Forward
LED indicator
Backward
MFB
EN EN
Keys Function
Volume up
Volume down
Play next song
Play previous
PAIRING For NC on/off and pairing headset function
Power on / off / Play/Pause/Phone call function
Micro USB
Micro USB
MFB
Active Noise-Canceling Operation
• Press the NC button to toggle NC mode on/off
• When NC activates, the green LED will turn on. When NC
mode is off, the green LED will turn off.
Headset Mode Care and maintenance
Standby mode:
• Double click MFB to use voice dial function
• Press the MFB and NC buttons to use the last number
redial function
• Hold the Vol- and Forward buttons for 3~5 seconds to clear
the paired list
Incoming call (ring) mode:
• Press the MFB to accept phone calls
• Hold the MFB to reject incoming calls
In call active mode:
Press Vol+ or Vol- to adjust volume
• Hold the MFB when you hear a beeping tone to
toggle calls between your headset and cellular phone
• Press the MFB to end a call
• Hold Vol+ and Vol- simultaneously to mute the microphone
• Keep dry and do not store in a damp place
• Do not put the product in direct sunlight for extended
periods of time or in hot areas.
• High temperature will shorten the life of the electronic
device, destroy the battery and distort certain plastic.
• Do not expose the product to extreme cold.
• Do not disassemble the product.
• Do not drop the headphones.
• Do not use chemicals or detergents to clean the product.
EN EN
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Radiation Exposure Statement:
This product complies with the Canada portable RF exposure limit set
forth for an uncontrolled environment and is safe for intended
operation as described in this manual. Further RF exposure reduction can
be achieved if the product is kept as far away as possible from the user
body or by selecting a lower output power if such a function is available
on the device.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie
Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce
dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This product complies with the Canada portable RF exposure limit
set forth for an uncontrolled environment and is safe for intended
operation as described in this manual. Further RF exposure reduction
can be achieved if the product is kept as far away as possible from the
user body or by selecting a lower output power if such a function is
available on the device.
Déclaration d’exposition aux radiations:
Le produit est conforme aux limites d’exposition pour les appareils
portables RF pour les Etats-Unis et le Canada établies pour un
environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce
manuel. La réduction aux expositions RF peut être augmentée si
l’appareil peut être conservé aussi loin que possible du corps de
l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la
plus faible si une telle fonction est disponible.
Antec, Inc.
47900 Fremont Blvd.
Fremont, CA 94538
USA
tel: 510-770-1200
fax: 510-770-1288
Antec Europe B.V.
Stuttgartstraat 12
3047 AS Rotterdam
e Netherlands
Customer Support:
US & Canada
1-800-22ANTEC
nasupport@antec.com
Europe
+ 49-40-226-139-22
eusupport@antec.com
Asia
+ 866-(0)800-060-696
© 2012 Antec, Inc. All rights reserved.
All trademarks are the property of their respective owners.
Reproduction in whole or in part without written
permission is prohibited.
Printed in China.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Antec BXH-200NCWHI User manual

Category
Mobile headsets
Type
User manual
This manual is also suitable for

Antec BXH-200NCWHI is a wireless headset that offers active noise cancellation for an immersive audio experience. It features Bluetooth connectivity for easy pairing with your devices. The headset has built-in controls for adjusting volume, playing music, and answering calls. It also has a built-in microphone for clear communication. The Antec BXH-200NCWHI is perfect for listening to music, making calls, or gaming on the go.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI