Klipsch RP-450C Piano Black User manual

Category
Soundbar speakers
Type
User manual
REFERENCE (n):
1) the standard, the benchmark, the point used
for comparison
2) the embodiment of the legendary Klipsch sound
LOUD AND PROUD SINCE 1946
In 1946, Paul W. Klipsch revolutionized the audio industry by creating
our proprietary horn technology and the acoustic principles that
are the driving force behind our highly acclaimed signature sound.
Today, we remain true to PWK’s vision and pack the better part
of a century’s worth of sweat and genius into every product we
make. These speakers are the result of our obsession with that
aural perfection. Experience the power, detail and emotion of
Klipsch Reference Series.
We are the Keepers of the Sound
®
.
ENGLISH
REFERENCE PREMIERE SPEAKERS
RP-160M
RP-450C
RP-440C
RP-250CRP-250FRP-260FRP-280F
RP-150M RP-250S RP-240S
BEFORE YOU START
The included optional
spikes are intended to
increase stability on
carpeted floors. Spikes
are not recommended
for hard surfaces
Some Klipsch
®
speakers have feet and other accessories that may need to
be installed prior to use. Please refer to Diagrams 1, 2, 3 and 4 for installation.
DIAGRAM 1
R-150M WALL MOUNT
DIAGRAM 2
CENTER CHANNELS
DIAGRAM 3
SURROUND SPEAKERS
DIAGRAM 4
FLOORSTANDING SPEAKERS
Felt
Bumpers
Rubber
Bumpers
Rubber
Bumpers
Optional
Tilt Rod for
RP-250C
Domed Bumpers
Place on bottom or
back (if wall mounted)
Floor Spikes
OR
OR
1~2mm
1~2mm
ROOM PLACEMENT
CONNECTION
Left and Right Main Channel Speakers — For optimum performance, Klipsch Group,
Inc. (KGI) suggests placing your speakers 6 to 15 feet (1.8 to 4.6m) apart. They may
also be toed-in slightly for better stereo imaging. The listening position should be
about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3
for connection and placement.
Center Channel Speakers — Center channel speakers are designed to place
dialogue and primary sounds so that they appear to come from the video screen.
The speakers should therefore be placed as close to the screen as possible,
preferably directly on top of or below the screen. Refer to Figures 1, 2 and 3 for
connection and placement.
Rear Surround Channel Speakers — Klipsch WDST surround speakers should be
placed approximately 2 feet above the listening position. Typically this will be
about 5-7 feet above the floor. The surrounds should be placed on the walls directly
adjacent to the listening position. Another option would be on the wall behind the
listening position. The final surround speaker placement depends on your room’s
characteristics. They are designed to recreate the sense of space and ambience that
many of today’s surround sound technologies provide. Refer to Figures 1, 3 and 4 for
connection and placement.
Conventional Connection — Using 16-12 gauge speaker wire, connect the RED
“positive” (+) terminal of the LEFT speaker to the RED “positive” (+) terminal of
your amplifier’s LEFT channel. Connect the BLACK “negative” (–) terminal of the
LEFT speaker to the BLACK “negative” (–) terminal of your amplifier’s LEFT channel.
Repeat this procedure for connecting all remaining speakers to the appropriate
amplifier channels. Refer to Figure 3. Make sure that no bare wires from any of the
connections touch any other terminals as this could cause a short and damage your
equipment.
Reference Premiere models RP-280F, RP-260F, RP-250F and RP-160M are equipped
with dual binding posts. If single wire connection is used, the terminal connecting
bar should remain in place. If Bi-wire or Bi-amp connection is used, the terminal
connecting bar must be removed. Please see your receiver’s manual for
further instructions.
Amplifier Requirements — Klipsch speakers are highly efficient and will operate
easily on a wide variety of amplifiers. All Klipsch speakers are 8-ohm compatible and
can be driven to very high levels with low distortion. Due to the high output levels
Klipsch speakers are capable of reproducing, exercise caution with the volume
control. Excessive volume over long periods can permanently damage your hearing.
Overdriving your amplifier could also damage your speakers. Check with your dealer
or amplifier manual to make sure your particular amplifier is best suited to your
application. We want you listening for a lifetime.
FIGURE 2
CENTER CHANNEL
FIGURE 4
WALL MOUNTING
FIGURE 3
STANDARD CONNECTIONS
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
6’ - 15’
Optional Side Surround Placement (Option A is preferred)
#10
2.5" - 3" panhead wood screws
Mount in wall stud or use
anchors - leave 1/4" exposed
VIA KEYHOLE
VIA THREADED INSERT
CAUTION!
Do not use keyhole
for ceiling mounting!
BELOW
ABOVE
OR
OR
FIGURE 1
SPEAKER PLACEMENT IN LISTENING AREA
3/8-16 x 0.5”
*Wall brackets not included
REFERENCE PREMIERE WITH DOLBY ATMOS
®
TECHNOLOGY
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
SPEAKER PLACEMENT IN LISTENING AREA
MANDATORY
SECONDARY
OPTIONAL
OR OR
SUROUND
SPEAKER
HEIGHT
MAIN
HEIGHT
MAIN
RP-280FA
HEIGHT
MAIN
RP-140SAFLOORSTANDING SPEAKER
REFERENCE PREMIERE WITH DOLBY ATMOS
®
TECHNOLOGY
OR
CONNECTIONS
WALL MOUNTINGELEVATION SPEAKER
#10
2.5" - 3" panhead
wood screws
Mount in wall stud
or use anchors -
leave 1/4" exposed
CAUTION!
Do not use keyhole
for ceiling mounting!
The RP-140SA can be added to
any passive loudspeaker setup.
RECEIVER
RECEIVER
OR
RECOMMENDED
MIN. CROSSOVER:
150Hz
RECOMMENDED
MIN. CROSSOVER:
80Hz
The only thing you should ever need to do to your speakers is dust them
occasionally. Never apply any abrasive or solvent-based cleaner or any
harsh detergent. You can clean the grilles with the brush attachment of
a vacuum cleaner.
CARE AND CLEANING
Register your product online at www.klipsch.com/register
• Keep up-to-date on new products and promotions.
• Your personal information will never be resold.
• This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.
PRODUCT REGISTRATION
REFERENCE PREMIERE AVEC LA TECHNOLOGIE DOLBY ATMOS
®
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
POSITIONNEMENT DES ENCEINTES DANS LA ZONE D’ÉCOUTE
OBLIGATOIRE
SECONDAIRE
OPTIONNEL
OU OU
ENCEINTES
SURROUND
REFERENCE PREMIERE MIT DOLBY ATMOS
®
TECHNOLOGIE
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
LAUTSPRECHERPLATZIERUNG IM HÖRBEREICH
NOTWENDIG
SEKUNDÄR
OPTIONAL
ODER ODER
SURROUND
LAUTSPRECHER
ALTAVOCES REFERENCE PREMIERE
RP-160M
RP-450C
RP-440C
RP-250CRP-250FRP-260FRP-280F
RP-150M RP-250S RP-240S
ALTAVOCES REFERENCE PREMIERE CON TECNOLOGÍA ATMOS
®
DE DOLBY
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
UBICACIÓN DEL ALTAVOZ EN EL ÁREA DE AUDICIÓN
OBLIGATORIO
SECUNDARIO
OPCIONAL
O
BIEN
O
BIEN
ALTAVOZ
SURROUND
HEIGHT
MAIN
HEIGHT
MAIN
RP-280FA
HEIGHT
MAIN
RP-140SAFLOORSTANDING SPEAKER
ALTAVOCES REFERENCE PREMIERE CON TECNOLOGÍA ATMOS
®
DE DOLBY
O BIEN
CONEXIONES ESTÁNDAR
MONTAJE DE LOS ALTAVOCES SURROUND EN LA PAREDALTAVOZ DE ALTURA
El RP-140SA se puede agregar
a cualquier configuración de
altavoz pasivo.
Surround A/V
(Audio y video Surround)
Surround A/V
(Audio y video Surround)
O BIEN
ALTAVOZ DE PISO
ALTURA ALTURA
ALTURA
PRINCIPAL PRINCIPAL
PRINCIPAL
PRECAUCIÓN
No utilice el agujero en forma
de ojo de cerradura para hacer
montaje en el cielo raso.
Tornillos Nº 10 o de 2.5 plg. a 3 plg. de
cabeza troncocónica para madera
ntelos en un paral de pared
o utilice anclas. Deje expuesto
1/4 de plg.
150Hz
80Hz
Crossover mín.
recomendado
Crossover mín.
recomendado
CAIXAS ACÚSTICAS REFERENCE PREMIERE
RP-160M
RP-450C
RP-440C
RP-250CRP-250FRP-260FRP-280F
RP-150M RP-250S RP-240S
REFERENCE PREMIERE COM TECNOLOGIA DOLBY ATMOS
®
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
OBRIGATÓRIO
SECUNDÁRIO
OPCIONAL
OU OU
CAIXAS
ACÚSTICAS
SURROUND
POSICIONAMENTO DAS CAIXAS ACÚSTICAS NO AMBIENTE
ALTOPARLANTI REFERENCE PREMIERE
RP-160M
RP-450C
RP-440C
RP-250CRP-250FRP-260FRP-280F
RP-150M RP-250S RP-240S
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
FIGURA 2
CANALE CENTRALE
ATTENZIONE
Non utilizzare la scanalatura
per vite per fissare
l’altoparlante al soffitto.
SOTTO
SOPRA
OPPURE
FIGURA 1
COLLOCAZIONE DEGLI ALTOPARLANTI NELLAREA DI ASCOLTO
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
FIGURA 4
FISSAGGIO A PARETE DEGLI ALTOPARLANTI SURROUND
FIGURA 3
CONNESSIONI STANDARD
SUB SUB
TV
C
X
Y
Z
sL
sR
sL
sR
X=Y=Z
L R
Front Right Front Left
Viti per legno a testa tronco-conica da
6,35 – 7,62 mm (n. 10 o 12)
Serrare le viti direttamente nel
montante o nei tasselli, lasciandone
sporgere le teste di 6 mm.
6’ - 15’
Collocazione facoltativa surround laterali (è preferibile l’opzione A)
MEDIANTE FORO
MEDIANTE INSERTO
FILETTATO
OPPURE
3/8" – 16
*Staffe da parete non fornite
Sx anteriore Dx anteriore
REFERENCE PREMIERE CON TECNOLOGIA DOLBY ATMOS
®
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
RP-280FA RP-140SA RP-140SA
RP-140SARP-280FA
OBBLIGATORI
SECONDARI
OPZIONALI
OPPURE OPPURE
ALTOPARLANTI
SURROUND
RP-140SA
COLLOCAZIONE DEGLI ALTOPARLANTI NELLAREA DI ASCOLTO
HEIGHT
MAIN
HEIGHT
MAIN
RP-280FA
HEIGHT
MAIN
RP-140SAFLOORSTANDING SPEAKER
REFERENCE PREMIERE CON TECNOLOGIA DOLBY ATMOS
®
OPPURE
CONNESSIONI
FISSAGGIO A PARETE DEGLI ALTOPARLANTI SURROUNDALTOPARLANTI ELEVATO
L’RP-140SA può essere aggiunto
a qualsiasi configurazione di
altoparlanti passivi.
Ricevitore A/V surround
Ricevitore A/V surround
OPPURE
DIFFUSORE DA PAVIMENTO
ALTEZZA ALTEZZA
ALTEZZA
PRINCIPALE PRINCIPALE
PRINCIPALE
ATTENZIONE
Non utilizzare la scanalatura
per vite per fissare
l’altoparlante al soffitto.
Viti per legno a testa tronco-conica da
6,35 – 7,62 mm (n. 10 o 12)
Serrare le viti direttamente nel
montante o nei tasselli, lasciandone
sporgere le teste di 6 mm.
150Hz
80Hz
Crossover min
raccomandato
Crossover min
raccomandato
1-800-KLIPSCH ©2015 KLIPSCH GROUP, INC. ALL RIGHTS RESERVED. KLIPSCH AND KEEPERS OF THE SOUND ARE REGISTERED TRADEMARKS OF KLIPSCH GROUP, INC. IN THE USA AND OTHER COUNTRIES.
A WHOLLY-OWNED SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION. MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY ATMOS IS A REGISTERED TRADEMARK OF DOLBY LABORATORIES.
V08 - 0415
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Klipsch RP-450C Piano Black User manual

Category
Soundbar speakers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI