CI 66V I S

Scholtes CI 66V I S, CI 66 V W S, CI 66V A S, CI 66V W S User guide

  • Hello! I am an AI chatbot trained to assist you with the Scholtes CI 66V I S User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
English
Italiano
IT
GB
Istruzioni per l’uso
CUCINA E FORNO
Sommario
Istruzioni per l’uso,1
Descrizione dell’apparecchio- Vista d’insieme,6
Descrizione dell’apparecchio- Pannello di controllo,7
Assistenza,9
Installazione, 10
Avvio e utilizzo,12
Programmi di cottura,13
Utilizzo del piano cottura,17
Precauzioni e consigli,18
Manutenzione e cura,19
Operating Instructions
COOKER AND OVEN
Contents
Operating Instructions,1
Description of the appliance-Overall view,6
Description of the appliance-Control Panel,7
Assistance,9
Installation,21
Start-up and use,23
Cooking modes,24
Using the hob,28
Precautions and tips,29
Care and maintenance,30
FR
Français
Mode d’emploi
CUISINIERE ET FOUR
Sommaire
Mode d’emploi,1
Description de l’appareil-Vue d’ensemble, 6
Description de l’appareil-Tableau de bord, 7
Assistance,9
Installation,32
Mise en marche et utilisation,34
Utilisation du plan de cuisson,39
Utilisation du four,35
Précautions et conseils, 40
Nettoyage et entretien,41
Nederland
NL
Gebruiksaanwijzing
FORNUIS EN OVEN
Inhoud
Gebruiksaanwijzing,1
Beschrijving van het apparaat-Aanzichttekening,6
Beschrijving van het apparaat-Bedieningspaneel,7
Servicedienst,9
Installatie, 43
Starten en gebruik, 45
De kookzones,50
Gebruik van de oven,46
Voorzorgsmaatregelen en advies,51
Onderhoud en verzorging,52
DE
Deutsch
Bedienungsanleitungen
HERD UND OFEN
Inhalt
Bedienungsanleitungen,1
Beschreibung des Geräts-Übersicht,6
Beschreibung des Geräts-Schalttafel,7
Hilfe,9
Installation,54
Inbetriebnahme und Benutzung,56
Gebrauch des Ofens,57
Gebrauch des Kochfeldes,61
Vorsichtsmaßnahmen und Tipps,62
Pflege und Wartung,63
CI 66 V W S
CI 66 V I S
CI 66 V A S
Attenzione,2
Warning,1
Attention,2
Pas Op,2
Zur Beachtung,2
WARNING: Unattended cooking on a
hob with fat or oil can be dangerous
and may result in fire.
NEVER try to extinguish a fire with
water, but switch off the appliance
and then cover flame e.g. with a lid or
a fire blanket.
WARNING: Danger of fire: do not
store items on the cooking surfaces.
WARNING: If the surface in glass-
ceramic is cracked, switch off the
appliance to avoid the possibility of
electric shock.
Do not use harsh abrasive cleaners
or sharp metal scrapers to clean
the oven door glass since they can
scratch the surface, which may result
in shattering of the glass.
The internal surfaces of the
compartment (where present) may
become hot.
Never use steam cleaners or pressure
cleaners on the appliance.
Remove any liquid from
the lid before opening it.
Do not close the glass cover (if present)
when the gas burners or electric
hotplates are still hot.
WARNING: Ensure that the appliance is
switched off before replacing the lamp
to avoid the possibility of electric shock
.
FR
ATTENTION : cet appareil ainsi que ses
parties accessibles deviennent très chauds
pendant leur fonctionnement.
Il faut faire attention de ne pas toucher les
éléments chauffants.
Ne laisser s'approcher les enfants de mo-
ins de 8 ans à moins qu’ils ne soient sous
surveillance constante.
ATTENTIONATTENTIONATTENTION
Le présent appareil peut être utilisé par
des enfants de plus de 8 ans et par des
personnes présentant des capacités phy-
siques, sensorielles ou mentales réduites
ou n’ayant pas l’expérience ou les connais-
sances nécessaires, à condition qu’ils so-
ient sous bonne surveillance ou qu’ils aient
reçu les instructions nécessaires pour une
utilisation de l’appareil en toute sécurité et
à condition qu’ils se rendent compte des
dangers encourus. Les enfants ne doivent
pas jouer avec l’appareil. Les opérations
de nettoyage et d’entretien ne doivent pas
être effectuées par des enfants non surve-
illés.
ATTENTION : laisser un récipient de cuis-
son contenant de l’huile ou de la graisse
sur le foyer est dangereux et risque d’en-
traîner un incendie.
Il ne faut JAMAIS essayer d’éteindre une
flamme ou un incendie avec de l’eau ! Il
faut éteindre l’appareil et couvrir la flamme
avec un couvercle, par exemple, ou avec
une couverture anti-feu.
Ne jamais nettoyer l’appareil avec des net-
toyeurs vapeur ou haute pression.
Essuyer tout liquide pouvant se trouver
sur le couvercle avant de l’ouvrir. Ne
pas abaisser le couvercle en verre (s’il y
en a un) tant que les brûleurs gaz ou la
plaque électrique sont chauds.
ATTENTION : s’assurer que l’appareil
est éteint avant de procéder au rempla-
cement de l’ampoule, afin d’éviter tout
risque d’électrocution.
Ne pas utiliser de produits abrasifs ni de
spatules métalliques coupantes pour net-
toyer la porte du four en verre, sous peine
d’érafler la surface et de briser le verre.
Les surfaces intérieures du tiroir (s’il y en a
un) peuvent devenir chaudes.
3
! When you place the rack inside,
make sure that the stop is directed
upwards and in the back of the cavity.
6
1.Glass ceramic hob
2.Control panel
3.Sliding grill rack
4.DRIPPING pan
5.Adjustable foot
6.GUIDE RAILS for the sliding racks
7.position 5
8.position 4
9.position 3
10.position 2
11.position 1
Description of the appliance
Overall view
GB
1. Piano di cottura in ceramica
2.Pannello di controllo
3.Ripiano GRIGLIA
4.Ripiano LECCARDA
5.Piedino di regolazione
6.GUIDE di scorrimento dei ripiani
7.posizione 5
8.posizione 4
9.posizione 3
10.posizione 2
11.posizione 1
IT
Descrizione dell’apparecchio
Vista d’insieme
1.Table de cuisson céramique
2. Tableau de bord
3. Support GRILLE
4. Support LECHEFRITE
5.Pied de réglage
6. GLISSIERES de coulissement
7. niveau 5
8. niveau 4
9. niveau 3
10. niveau 2
11. niveau 1
Description de l’appareil
Vue d’ensemble
FR
1.Keramische kookplaat
2.Bedieningspaneel
3.Ovenrek
4.Lekplaat of bakplaat
5. Stelschroeven
6. Geleidersvan de roosters
7. stand 5
8. stand 4
9. stand 3
10. stand 2
11. stand 1
Aanzichttekening
Aanzichttekening
NL
1 . Glaskeramik-Kochfeld
2 . Bedienfeld
3. Einschub BACKOFENROST
4. Einschub FETTPFANNE
5. Höhenverstellbarer Stellfuß
6. GLEITFÜHRUNGEN für die Einschübe
7. position 5
8. position 4
9. position 3
10. position 2
11. position 1
Beschreibung des Gerätes
Geräteansicht
DE
2
3
4
6
9
10
11
1
5
5
7
8
GB
7
Description of the appliance
Control panel
GB
1.SELECTOR knob
2.THERMOSTAT/TIMER knob
3.PYROLITIC CYCLE button
4.SET TIMER button
5.DISPLAY
6.Hob ELECTRIC HOTPLATE control knobs
7.Indicator light for ELECTRIC HOTPLATE
IT
Descrizione dell’apparecchio
Panello di controllo
1.Manopola PROGRAMMI
2.Manopola TERMOSTATO/IMPOSTAZIONE TEMPI
3.Tasto PIROLISI
4.Tasto IMPOSTAZIONE TEMPI
5.DISPLAYPLAY
6.Manopole delle PIASTRE ELETTRICHE
del piano cottura
7.Spia FUNZIONAMENTO PIASTRA
Description de l’appareil
Tableau de bord
FR
Aanzichttekening
Bedieningspaneel
NL
1.Bouton PROGRAMMES
2.Bouton THERMOSTAT/SELECTION TEMPS
3.Touche PYROLYSE
4.Touche SELECTION TEMPS
5.AFFICHEUR
6.Boutons PLAQUE ЙLECTRIQUE
du plan de cuisson
7.Voyant PLAQUE ЙLECTRIQUE
1. PROGRAMMAKNOP
2.Knop THERMOSTAAT/INSTELLEN TIJDEN
3.Toets PYROLYSE
4.Toets INSTELLEN TIJDEN
5.DDISPLAYISPLAY
6.Knoppen ELEKTRISCHE KOOKPLAAT van de
kookplaat
7.Controlelampje ELEKTRISCHE
Beschreibung des Gerätes
Bedienfeld
DE
1.Reglerknopf PROGRAMME
2.Drehknopf THERMOSTAT/ ZEITEINSTELLUNG
3.Taste PYROLYSE
4. Taste ZEITEINSTELLUNG
5.DISPLAYIS
6.Reglerknopf ELEKTROPLATTE
7.Kontrolleuchte ELEKTROPLATTE
6
1
2
4
7
3
5
8
1. Icône PROGRAMME BASSE TEMPERATURE
2. Icônes PROGRAMMES AUTOMATIQUES
3. Indicateur de Préchauffage
4. Voyant PORTE VERROUILLEE
5. Icône STOP
6. Icône DUREE
7. Icône FIN DE CUISSON
8. Icône MINUTEUR
9. Icône HORLOGE
10.Chiffres TEMPS et TEMPERATURE
1. Symbool PROGRAMMA LAGE TEMPERATUR
2 .Symbolen AUTOMATISCHE PROGRAMMA’S
3. Aanwijzer van de Voorverwarming
4. Aanwijzer DEURBLOKKERING
5. Symbool STOP
6. Symbool DUUR
7. Symbool EINDE BEREIDING
8. Symbool TIMER
9. Symbool KLOK
10.Cijfers TEMPERATUREN en TIJDEN
1. Symbol PROGRAMME NIEDRIGE TEMPERATUR
2. Symboltasten AUTOMATIK-GARPROGRAMME
3. Vorheizanzeige
4. TÜRSPERRE Anzeige
5. STOPP Symbol
6. DAUER Symbol
7. GARENDE Symbol
8. KURZZEITWECKER Symbol
9. UHR Symbol
10.ZEITEN und TEMPERATUR Digit-Anzeige
1
2
3
4
5
6
7
8
9
10
DE
FR
I T
NL
GB
1. Icona PROGRAMMA BASSA TEMPERATURA
2. Icone PROGRAMMI AUTOMATICI
3. Indicatore del Preriscaldamento
4. Indicatore PORTA BLOCCATA
5. Icona STOP
6. Icona DURATA
7. Icona FINE COTTURA
8. Icona CONTAMINUTI
9. Icona OROLOGIO
10.Digit numerici TEMPERATURA e TEMPI
1. LOW TEMPERATURE MODE icon
2. AUTOMATIC COOKING MODE icons
3. Indicator Preheating
4. indicator DOOR LOCK
5. icon STOP
6. icon DURATION
7. icon END OF COOKING
8. icon TIMER
9. icon CLOCK
10.digits TIME and TEMPERATURE
DISPLAYIS
AFFICHEUR
DISPLAYIS
DISPLAYIS
DISPLAYIS
GB
9
GB
IT
FR
NL
DE
Attenzione:
L’apparecchio è dotato di un sistema di diagnostica
automatica che consente di rilevare eventuali
malfunzionamenti. Questi vengono comunicati dal display
tramite messaggi del tipo: “F” seguito da numeri.
In questi casi è necessario l’intervento dell’assistenza
tecnica.
! Non ricorrere mai a tecnici non autorizzati.
Comunicare:
Il tipo di anomalia;
Il modello della macchina (Mod.)
Il numero di serie (S/N)
Queste ultime informazioni si trovano sulla targhetta
caratteristiche posta sull’apparecchio
Assistenza attiva 7 giorni su 7
In caso di necessità d’intervento chiamare il Numero
Unico Nazionale 199.199.199*.
Un operatore sarà a completa disposizione per fissare
un appuntamento con il Centro Assistenza Tecnico
Autorizzato più vicino al luogo da cui si chiama.
È attivo 7 giorni su 7, sabato e domenica compresi, e non
lascia mai inascoltata una richiesta.
*Al costo di 14,26 centesimi di Euro al minuto(iva inclusa)
dal Lun. al Ven. dalle 08:00 alle 18:30, il Sab. dalle 08:00
alle 13:00 e di 5,58 centesimi di Euro al minuto (iva
inclusa) dal Lun. al Ven. dalle 18:30 alle 08:00, il Sab.
dalle 13:00 alle 08:00 e i giorni festivi, per chi chiama da
telefono fisso.
Per chi chiama da radiomobile le tariffe sono legate al
piano tariffario dell’operatore telefonico utilizzato.
Le suddette tariffe potrebbero essere soggette a
variazione da parte dell’operatore telefonico; per maggiori
informazioni consultare il sito www.scholtes.com.
Assistenza
Warning:
The appliance is fitted with an automatic diagnostic system which
detects any malfunctions. Malfunctions are displayed by messages
of the following type: “F” followed by numbers.
Call for technical assistance in the event of a malfunction.
! Never use the services of an unauthorised technician.
Please have the following information to hand:
The type of problem encountered.
The appliance model (Mod.).
The serial number (S/N).
The latter two pieces of information can be found on the data plate
located on the appliance.
Attention :
L’appareil monte un système d’autotest qui permet de détecter tout
e
anomalie de fonctionnement. Ces anomalies sont affichées sous la
forme: “ F ” suivi des chiffres.
Contactez alors un service d’assistance technique.
! Ne jamais faire appel à des techniciens non agréés.
Indiquer :
le type d’anomalie;
le modèle de l’appareil (Mod.);
Son numéro de série (S/N).
Ces informations figurent sur la plaque signalétique apposée sur
l’appareil
Assistance
Assistance
Servicedienst
Belangrijk:
Het apparaat is voorzien van een automatisch diagnostisch
systeem dat eventuele storingen opspoort. Deze kunt u op het
display aflezen met berichten zoals: “F” gevolgd door enkele
nummers.
In deze gevallen moet u de technische dienst inschakelen.
! Wendt u nooit tot niet erkende monteurs.
Dit dient u door te geven:
Het soort storing;
Het model apparaat (Mod.)
Het serienummer (S/N)
Deze informatie bevindt zich op het typeplaatje op het
apparaat
Achtung:
Das Gerät ist mit einem Diagnosesystem ausgestattet, dank
dem etwaige Betriebsstörungen erfasst werden können. Diese
werden auf dem Display durch Meldungen folgenden Typs
angezeigt: “F“ gefolgt von Nummern.
In diesem Fall den Kundendienst anfordern.
! Wenden Sie sich nur an autorisierte Techniker.
Geben Sie bitte Folgendes an:
die genaue Beschreibung des Fehlers
das Gerätemodell (Mod.)
die Seriennummer (S/N).
Letztere Informationen können dem Typenschild, das sich auf
dem Gerät befindet, entnommen werden.
Kundendienst
GB
21
! Please keep this instruction booklet in a safe place for
future reference.. Make sure the booklet remains with
the appliance if it is sold, given away or moved.
! Please read this manual carefully: it contains
important information on installation, operation and
safety.
! The appliance must be installed by a qualified
professional in accordance with the instructions
provided.
! Any necessary adjustment or maintenance must be
performed after the cooker has been disconnected
from the electricity supply.
Positioning and levelling
! The appliance may be installed alongside any
cupboards whose height does not exceed that of the
hob surface.
! Make sure that the wall which is in contact with the
back of the appliance is made from a non-flammable,
heat-resistant material (T 90°C).
To install the appliance correctly:
Place it in the kitchen, the dining room or the studio
flat (not in the bathroom).
If the top of the hob is higher than the cupboards,
the appliance must be installed at least 600 mm away
from them.
If the cooker is installed underneath a wall cabinet,
there must be a minimum distance of 420 mm
between this cabinet and the top of the hob.
This distance should be
increased to 700 mm
if the wall cabinets are
flammable (see  gure).
Do not position
blinds behind the cooker
or less than 200 mm
away from its sides.
Any hoods must be
installed in accordance
with the instructions listed in the relevant operating
manual.
Levelling
If it is necessary to level the
appliance, screw the adjustable
feet into the positions provided
on each corner of the base of
the cooker (see  gure).
The legs* fit into the slots on the
underside of the base of the
cooker.
Electrical connection
Fitting the power supply cable
To open the terminal board:
Insert a screwdriver into the side tabs of the terminal
board cover.
Pull the cover to open it.
To install the cable,
follow the instructions
below:
Loosen the cable clamp screw and the wire contact
screws.
! The jumpers are pre-set at the Factory for 230 V
single-phase connection (see  gure).
NL
230V ~
H05RR-F 3x4 CEI-UNEL 35363
1
3
2
4
5
H05VV-F 3x4 CEI-UNEL 35746
To carry out the electrical connections as shown in
the figures, use the two jumpers inside the box (see
gure - labelled “P”).
Installation
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min. mm.
420
Min. mm.
N
L2
L1
L3
P
NL2L1
400V 2N~
H05RR-F 4x4 CEI-UNEL 35363
H05VV-F 4x4 CEI-UNEL 35746
1
3
2
4
5
NL3L1L2
400V 3N~
H05RR-F 5x2.5 CEI-UNEL 35363
H05VV-F 5x2.5 CEI-UNEL 35746
1
3
2
4
5
22
GB
Secure the power supply cable by fastening the
cable clamp screw then put the cover back on.
Connecting the supply cable to the electricity mains
Install a standardised plug corresponding to the load
indicated on the appliance data plate (see Technical
data table).
The appliance must be directly connected to the mains
using an omnipolar switch with a minimum contact
opening of 3 mm installed between the appliance and
the mains. The switch must be suitable for the charge
indicated and must comply with current electrical
regulations (the earthing wire must not be interrupted
by the switch). The supply cable must be positioned
so that it does not come into contact with temperatures
higher than 50°C at any point.
Before connecting the appliance to the power supply,
make sure that:
The appliance is earthed and the plug is compliant with
the law.
The socket can withstand the maximum power of the
appliance, which is indicated by the data plate.
The voltage falls between the values indicated on
the data plate.
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only.
! The manufacturer declines any liability should
these safety measures not be observed.
TABLE OF CHARACTERISTICS
Oven dimensions
(HxWxD)
32x43.5x40 cm
Volume 57 l
Useful
measurements
relating to the oven
compartment
width 42 cm
depth 44 cm
height 8.5 cm
Burners
may be adapted for use with any type
of gas shown on the data plate
Voltage and
frequency
see data plate
Glass Ceramic Hob
Front Left
Back Left
Back Right
Front Right
Max. Ceramic Hob
Consumption
1700W
1200W
2300W
1200W
6400W
ENERGY LABEL
Directive 2002/40/EC on the label of
electric ovens. Standard EN 50304
Ene rgy con su mptio n for Natu ral
convection – heating mode:
Convection mode
Declared energy consumption for
Forced convection Class
heating mode: Roasting
EC Directives: 2006/95/EC dated
12.12.06 (Low Voltage) and
subsequent amendments - 04/108/EC
dated 15/12/04 (Electromagnetic
Compatibility) and subsequent
amendments - 93/68/EEC dated
22/07/93 and subsequent
amendments - 2002/96/EC.
1275/2008 (Stand-by/Off mode)
Data plate, is located inside the flap or, after the oven
compartment has been opened, on the left-hand wall
inside the oven.
Safety Chain
! In order
to prevent
accidental
tipping of the
appliance, for
example by
a child clim-
bing onto the
oven door, the
supplied safety
chain MUST be
installed!
The cooker is fitted with a safety chain to be fixed by
means of a screw (not supplied with the cooker) to
the wall behind the appliance, at the same height as
the chain is attached to the appliance.
Choose the screw and the screw anchor according
to the type of material of the wall behind the applian-
ce. If the head of the screw has a diameter smaller
than 9mm, a washer should be used. Concrete wall
requires the screw of at least 8mm of diameter, and
60mm of length.
Ensure that the chain is fixed to the rear wall of the
cooker and to the wall, as shown in figure, so that
after installation it is tensioned and parallel to the
ground level.
GB
23
Start-up and use
Setting the clock
! The clock may be set when the oven is switched off
or when it is switched on, provided that the end time of
a cooking cycle has not been programmed previously.
1. Press the
button several times until the icon
and the first two numerical digits on the display start to
flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the hour value.
3. Press the
button again until the other two digits
on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
5. Press the
button again to confirm.
Setting the timer
! This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the button several times until the icon
and the three numerical digits on the DISPLAY begin to
flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
3. Press the
button again to confirm.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will be
activated.
Using the oven
! Before operating the product, remove all plastic film
from the sides of the appliance.
! The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Make sure that the room is well
ventilated before switching the oven off and opening
the oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances
used during the manufacturing process burning away.
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. The oven begins its preheating stage and the
preheating indicator lights up.
The temperature may be changed by turning the
THERMOSTAT knob
3. When the preheating indicator
switches off and
a buzzer sounds the preheating process is complete:
you may now place the food in the oven.
4. During cooking it is always possible to:
- Change the cooking mode by turning the SELECTOR
knob.
- Change the temperature by turning the
THERMOSTAT knob.
- Set the cooking duration and the cooking end time
(see Cooking modes).
- Stop cooking by turning the SELECTOR knob to the
“0” position.
5. The cooking time may be modified (see Cooking
Modes).
6. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from the point at
which it was interrupted, provided that the temperature
has not dropped below a certain level. Programmed
cooking modes which have not started will not be
restored and must be reprogrammed.
! There is no preheating stage for the ROASTING
modes.
! Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door. At the beginning of
the PYROLYTIC cycle, the cooling fan operates at low
speed.
! Once cooking has been completed, the cooling fan
remains on until the oven has cooled down sufficiently.
Oven light
When the oven is not in operation, the lamp can be
switched on at any time by opening the oven door.
*
Only available in certain models.
WARNING! The oven is
provided with a stop sys-
tem to extract the racks
and prevent them from
coming out of the oven.(1)
As shown in the drawing,
to extract them comple-
tely, simply lift the racks,
holding them on the front
part, and pull (2).
24
GB
Manual cooking modes
! All cooking modes have a default cooking
temperature which may be adjusted manually to a value
between 40°C and 250°C as desired.
In the SPIT ROAST mode, the default power level value
is 270°C.
TRADITIONAL OVEN mode
When using this traditional cooking mode, it is best to
use one cooking rack only.
MULTILEVEL mode
Since the heat remains constant throughout the oven,
the air cooks and browns food in a uniform manner. A
maximum of two racks may be used at the same time.
ROASTING mode
This combination of features increases the
effectiveness of the unidirectional thermal radiation
provided by the heating elements through the forced
circulation of the air throughout the oven.
This helps prevent food from burning on the surface
and allows the heat to penetrate right into the food.
Always cook in this mode with the oven door closed.
SPIT ROAST mode
The function is ideal for rotisserie spit cooking. Always
cook in this mode with the oven door closed.
LOW TEMPERATURE modes
This type of cooking can be used for proving,
defrosting, preparing yoghurt, heating dishes at the
required speed and slow cooking at low temperatures.
The temperature options are: 40, 65, 90 °C.
Spit roast
To operate the spit roast
function (see diagram)
proceed as follows:
1. Place the dripping
pan in position 1.
2. Place the rotisserie
support in position 3 and
insert the spit in the hole
provided on the back
panel of the oven.
3. Start the spit roast
function by selecting the
symbols.
! When this mode is enabled, the rotisserie spit will
stop if the door is opened.
Automatic cooking modes
! The temperature and cooking duration are pre-
set values, guaranteeing a perfect result every time
- automatically. These values are set using the C.O.P.®
(Programmed Optimal Cooking) system. The cooking
cycle stops automatically and the oven indicates when
the dish is cooked. The cooking duration may be
modified by a period of several minutes, as specified in
the description of the individual functions below.
PIZZA mode
Use this function to make pizza. Please see the
following chapter for further details. It will only be
possible to adjust the duration by -5/+5 minutes.
To achieve the best possible results, we recommend
that you carefully observe the instructions below:
Follow the recipe.
The weight of the dough should be between 500 g
and 700 g.
Lightly grease the dripping pan and the baking
trays.
Place the food inside the oven while it is still cold. If
you wish to place the food in the oven after it has been
preheated, immediately following a high-temperature
cooking programme, the text “Hot” will appear on the
display until the temperature of the oven has fallen to
120°. At this point it will be possible to place the pizza
in the oven.
Recipe for PIZZA:
1 Dripping pan on a low shelf level, hot or cold oven
Recipe for 3 pizzas weighing approximately 550 g:
1000 g flour, 500 ml water, 20 g salt, 20 g sugar, 100
ml olive oil, 20 g fresh yeast (or 2 sachets of powder
yeast)
Leavening at room temperature: 1 hour, or LOW
TEMPERATURE manual function set to 40°. Leave to
rise for approximately 30-45 minutes.
Place the food inside the oven while it is still cold.
• Start the
PIZZA cooking mode.
BREAD mode
To obtain the best results, we recommend that you
carefully observe the instructions below:
Follow the recipe.
Do not exceed the maximum weight of the dripping
pan.
Remember to pour 100 ml of cold water into the
baking tray in position 5.
Place the food inside the oven while it is still cold. If
you wish to place the food in the oven after it has been
preheated, immediately following a high-temperature
cooking programme, the text “Hot” will appear on the
GB
25
display until the temperature of the oven has fallen to
40°. At this point it will be possible to place the bread
in the oven.
Recipe for BREAD:
1 Dripping pan weighing 1000 g max placed on a low
shelf level
Recipe for 1000 g of dough: 600 g flour, 360 g water,
11g salt, 25 g fresh yeast (or 2 sachets of powder
yeast)
Method:
Mix flour and salt in a large bowl.
Dilute yeast in lukewarm water (approximately 35
degrees).
Make a small well in the mound of flour.
Pour in water and yeast mixture.
Knead dough by stretching and folding it over itself
with the palm of your hand for 10 minutes until it has
a uniform consistency and is not too sticky.
Form the dough into a ball shape, place it in a large
bowl and cover it with transparent plastic wrap to
prevent the surface of the dough from drying out.
Select the manual LOW TEMPERATURE function
on the oven and set the temperature to 40°C. Place
the bowl inside and leave the dough to rise for
approximately 1 hour (the dough should double in
volume).
Cut the dough into equal sized loaves.
Place them in the dripping pan on oven paper.
Cover the loaves with flour.
Make incisions on the loaves.
Remember to pour 100 ml of cold water into the
baking tray in position 5. For cleaning purposes,
we recommend the use of water and vinegar.
Place the loaves inside the oven while it is still cold.
• Start the
BREAD cooking mode.
Once baked, leave the loaves on one of the grill
racks until they have cooled completely.
BAKED CAKES mode
This function is ideal for baking cakes. Place the food
inside the oven while it is still cold. The dish may also
be placed in a preheated oven. It will only be possible
to adjust the duration by -10/+10 minutes.
Programming cooking
! A cooking mode must be selected before
programming can take place.
Programming the cooking duration
1. Press the
button several times until the icon
and the three digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the duration.
3. Press the
button again to confirm;
4. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds.
For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will
stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking
end time can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Next, press the
button until the icon and the
two digits on the DISPLAY begin to flash.
3. Turn the TIMER KNOB towards “+” and “-” to adjust
the hour value.
4. Press the
button again until the other two digits
on the DISPLAY begin to flash.
5. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
6. Press the
button again to confirm.
7. When the set time has elapsed, the text END
appears on the DISPLAY, the oven will stop cooking
and a buzzer sounds.
For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed, while the end time is set
to 12:30. The programme will start automatically at
11:15 a.m.
Programming has been set when the
and
buttons are illuminated. The DISPLAY shows the
cooking end time and the cooking duration alternately.
To cancel programming, turn the SELECTOR knob to
the “0” position.
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-
assisted cooking. This is because excessive direct
heat can burn temperature sensitive foods.
! In the SPIT ROAST and ROASTING cooking modes,
place the dripping pan in position 1 to collect cooking
residues (fat and/or grease).
MULTILEVEL
Use positions 2 and 4, placing the food which
requires more heat on 2.
Place the dripping pan on the bottom and the rack
on top.
After selecting any of the oven programs, the parame-
ter setting of the product is activated. It optimizes the
performance of cooking, but could result in a delayed
ignition of fan and heating elements.
!
26
GB
Oven cooking advice table
DISHES EXAMPLES FUNCTION TEMPERATURE SUPPORT
Savoury sponge cake
made with yoghurt
savoury sponge cake with olives, tuna, etc. Baked cakes or Multilevel 160 °C cake tin on dripping pan
Country-style pie cheese country-style pie, salmon pastry, … Baked cakes or Multilevel 200 °C on dripping pan
Terrines fish, meat, vegetable, foie gras terrines, etc. Traditional oven 160 °C
terrine mould on dripping pan (bain-
marie filled with hot water)
“En cocotte” dishes
poultry liver pie, salmon mousse, eggs en cocotte,
etc.
Traditional oven 160 °C
baking dish on dripping pan (bain-
marie filled with hot water)
CANAPES AND
STARTERS
Soufflé cheese soufflé, vegetable soufflé, fish soufflé, etc. Multilevel 200 °C cake tin on dripping pan
Gratin dishes potato gratin, parmentier, lasagne, etc.
Gratin
(or Roasting)
200-210 °C tray on dripping pan
Stuffed vegetables potatoes, tomatoes, courgettes, cabbages, etc. Multilevel 200 °C
on dripping pan
or cake tin on dripping pan
Braised vegetables en
cocotte
lettuce, saffron carrots, salsify, etc. Traditional oven 200 °C baking dish on dripping pan
Flan mushroom flan, vegetable pancake, etc. Traditional oven 160 °C
baking dish or cake tin on dripping
pan (bain-marie filled with hot water)
Terrines vegetable terrines Traditional oven 160 °C
cake tin on dripping pan (bain-marie
filled with hot water)
Soufflé asparagus soufflé , tomato soufflé, etc. Multilevel 200 °C cake tin on dripping pan
Dishes with a crust vegetable pie, etc. Multilevel 200 °C on dripping pan
Baking in foil (“en
papillote”)
truffles, etc. Multilevel 200 °C foil pouch on dripping pan
I LEGUMI
Rice Pilaff Traditional oven 180 °C tray on plate
DISHES EXAMPLES COOKING MODE TEMPERATURE SUPPORTS
Roast poultry chicken, duck, cockerel, capon. Roasting 200 °C poultry on the grid
Poultry on the spit chicken, cockerel Turnspit 250 °C turnspit support
Roasts
roast pork, veal, turkey, beef, leg of lamb, haunch of
venison, stuffed veal breast, etc.
Roasting 200 °C meat directly on the grid
large pieces of braised meat whole ham on the bone, large capon or turkey, etc. Multi-level
180 °C (one third
into cooking, lower
the temperature to
160°C)
meat on the oven tray baste
regularly with the juice
Meat casseroles and traditional
dishes
beef bourguignon, rabbit chasseur, veal Marengo,
lamb stew, Basquaise chicken, etc. hotpots,
cassoulet, etc.
Convection mode 190 °C casserole dish on the oven tray
Grilled meat ribs, cutlets, sausages, kebabs, chicken thighs, etc. Multi-level 270 °C
on the grid (the rack depends
on the size)
Meat pies Beef Wellington, steak and kidney pie, etc. Multi-level 200 °C
on the tray (for large pieces of
meat, lower the temperature to
160°C when the pastry crust is
baked)
MEAT
Salt-baking salt-baked poultry, etc. Multi-level 240 °C
meat on the oven tray or in a
dish on the oven tray
Grilled fish and fish kebabs bass, mackerel, sardines, mullet, tuna, etc. Multi-level 250 °C
on the grid (the rack depends
on the size)
Whole fish (stuffed) sea bream, carp, etc. Multi-level 200 °C on the oven tray
Fish fillets (with basting) salmon, scorpion fish, cod, bass, etc. Convection mode 200 °C on the oven tray
Foil parcels sole, dab, scallops, etc. Multi-level 200 °C on the oven tray
Fish pies (flaky or shortcrust
pastry)
salmon, pike, etc. Multi-level 200 °C on the oven tray
Fish au gratin brandade gratin, etc. gratin (or roasting)
200-210 °C
260 °C
dish on the oven tray
Soufflés scallop soufflé, etc. Multi-level 200 °C soufflé dish on the oven tray
FISH
Salt-baked fish bass, carp, etc. Multi-level 240 °C
fish on the oven tray or in a
dish on the oven tray
GB
27
Oven cooking advice table
DISHES EXAMPLES FUNCTION TEMPERATURE SUPPORT
Biscuit cakes (without yeast)
sponge cake, sponge fingers, swirled biscuits,
brownies, etc.
200 °C cake tin on dripping pan
White cheese tart 200 °C cake tin on dripping pan
Tarts made using leavened dough sugar pie, fruit brioche loaf, etc. 180 °C cake tin on dripping pan
Tart cases (crumbly sweet pastry) fresh fruit tarts (strawberry, raspberry, etc.) 180 °C
cake tin on dripping pan (with
baking beans weighing the
pastry down )
Pies (shortcrust or puff pastry) pear pie, etc. 220 °C cake tin on dripping pan
Cream puffs
profiteroles, mini cream puffs, cream puffs,
Paris-Brest pastry dessert, Saint Honoré cake,
etc.
190 °C on dripping pan
Mini sweet pastries (natural
yeast)
croissants, sugar pie, plain brioche (no filling),
mini savarin cakes, etc.
180 °C on dripping pan
BAKED DESSERTS
Large sweet pastries (natural
yeast)
Kugelhopf, brioche, panettone, sweet bread,
etc.
Baked cakes or Multilevel
160 °C
on dripping pan or cake tin on
dripping pan
Biscuit dough biscuits in paper trays, scooping biscuits, etc. 180 °C on dripping pan
Crumbly sweet pastry shortbread, spritz cookies, plain biscuits, etc. 200 °C on dripping pan
Puff pastry various types of puff pastry dessert, etc. 200 °C on dripping pan
Amaretti, coconut balls coconut or almond amaretti 180 °C on dripping pan
Leavened dough mini-brioches, mini-croissants, etc. 180 °C on dripping pan
White meringues 70 °C on dripping pan
PASTRIES
Golden meringues
Baked cakes or Multilevel
110 °C on dripping pan
Pudding
pudding made with bread or brioche, rice
pudding
190 °C cake tin on dripping pan
Cream desserts and flans,
semolina
crème caramel, crème brûlée, chocolate flan,
etc.
160 °C
moulds or baking dish on
dripping pan (bain-marie on
dripping pan)
Rice desserts
riz condé rice pudding, Imperial rice pudding,
etc.
180 °C cake tin on dripping pan
DESSERTS
Soufflé liqueur soufflé, fruit soufflé, etc.
Baked cakes or Multilevel
200 °C cake tin on dripping pan
FRUIT Stuffed or foil-baked fruit baked apples, etc. Multilevel 200 °C
cake tin or foil pouch on
dripping pan
DISHES EXAMPLES FUNCTION TEMPERATURE SUPPORT
Yoghurt Low temperature 40 °C baking dish on dripping pan
VARIOUS
Dried foods mushrooms, herbs, sliced fruit or vegetables, etc. Low temperature 65 °C on grille
Automatic cooking modes
Mode Cooking programme recommended for … EXAMPLES SUPPORT Dripping pan level
Cooking time
(minutes)
Oven at start
Sponge cake with yoghurt and pound cake (with baking
powder)
fruit cake, marble cake,
pound cake, etc.
cake tin on dripping
pan
2
Fruit tarts (short crust pastry or puff pastry, with or
without flan filling)
apple tart, Mirabelle plum
tart, pear tart, etc.
cake tin on dripping
pan
2
Puff pastry
apple puffs, country-style
tarts, pastries, etc.
on dripping pan 2
Baked
cakes
Desserts without yeast (clafoutis, almond pithivier,
country-style cake, etc.)
on dripping pan 2
45** Cold
Pizzas Deep-pan
pizza, focaccia (bread dough) 2 28** Hot or cold
Bread *** 2 55 Cold
* The cooking times listed above are intended as guidelines only and may be modified to suit personal tastes. Oven preheating times are set by default and cannot be modified manually.
** The duration of the automatic cooking functions are set by default. The values in the table refer to the minimum and maximum duration, which may be modified by the user, taking the
default value as a starting point.
*** As stated in the recipe, pour 100 g water into the dripping pan.
28
GB
! The glue applied on the gaskets leaves traces of
grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.
Switching the cooking zones on and off
To switch on a cooking zone, turn the corresponding
knob in a clockwise direction.
To switch it off again, turn the knob in an anticlockwise
direction until it is in the “0” position.
If the COOKING ZONE ON indicator light is lit, this
shows that at least one pf the cooking zones on the
hob is switched on.
Cooking zones
The hob is equipped with electric heating elements.
When they are in use the following items on the hob
become red.
The hob is equipped with electric hilite heating
elements. When they are in use the following items on
the hob become red.
A. The cooking zone with radiant
heating elements.
B.The cooking zone with a hilite
heating element.
C. The residual heat indicator
light: this indicates that
the temperature of the
corresponding cooking zone is greater than 60°C,
even when the heating element has been switched off
but is still hot.
Cooking zones with hilite heating elements
These emit heat via radiation from the hilite lamps they
contain. They have similar properties to gas burners:
they are easy to control and reach set temperatures
quickly, allowing you to actually see the power they are
providing.
Description of the heating elements
The circular radiant heating elements become red 10 -
20 seconds after they have been switched on.
The circular hilite heating elements guarantee even
heat distribution in addition to the usual advantages
that hilite heating elements bring.
Hilite lamps emit high levels of heat and light as soon
as they are switched on, offering the following practical
advantages:
· rapid heating (in relation to a gas burner)
· rapid cooling
· even temperature across the whole surface (due to
the circular heating elements).
They are similar to the other cooking zones on the hob
and are therefore easy to use. To ensure you use the
hob correctly, all you need to do is consult the cooking
tables in the instruction booklet.
Practical advice on using the hob
Use pans with a thick, flat base to ensure that they
adhere perfectly to the cooking zone.
Always use pans with a diameter that is large
enough to cover the hotplate fully, in order to use all
the heat produced.
Always make sure that the base of the pan is
completely clean and dry: this ensures that the pans
adhere perfectly to the cooking zones and that both
the pans and the hob remain effective for a longer
period of time.
Avoid using the same cookware that is used on gas
burners: the heat concentration on gas burners may
have warped the base of the pan, causing it not to
adhere to the surface correctly.
Never leave a cooking zone switched on without a
pan on top of it, as doing so may cause the zone to
become damaged.
AB
C
Using the glass ceramic
hob
Pos.
Radiant Ceramic Hot Plate
Normal or Fast Hot Plate
Ceramic Halogen Hot Plate
Automatic Hot Plate
0
Off Off
1
To cook fish To melt butter or chocolate
2
To cook potatoes (steam),
soup, chickpeas, beans
To reheat liquids
3
To continue cooking large
quantities of food, vegetable
soup
4
To roast (medium)
For sauces (including cream
sauces)
5
To roast (well done)
6
To brown or quickly bring to a
boil
To cook at boiling point
7
8
For roasts
9
10
For stews
11
12
To fry
GB
29
Precautions and tips
! This appliance has been designed and manufactured in
compliance with international safety standards. The following
warnings are provided for safety reasons and must be read
carefully.
General safety
These instructions are only valid for the countries whose
symbols appear in the manual and on the serial number plate
located on the appliance.
The appliance was designed for domestic use inside the
home and is not intended for commercial or industrial use.
The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
Do not touch the appliance with bare feet or with wet or damp
hands and feet.
The appliance must be used by adults only for the
preparation of food, in accordance with the instructions
outlined in this booklet. Any other use of the appliance
(e.g. for heating the room) constitutes improper use and
is dangerous. The manufacturer may not be held liable
for any damage resulting from improper, incorrect and
unreasonable use of the appliance.
The instruction booklet accompanies a class 1 (insulated)
or class 2 - subclass 1 (recessed between 2 cupboards)
appliance.
Do not touch the heating elements or certain parts of the
oven door when the appliance is in use; these parts become
extremely hot. Keep children well away from the appliance.
Make sure that the power supply cables of other electrical
appliances do not come into contact with the hot parts of the
oven.
The openings used for the ventilation and dispersion of heat
must never be covered.
Do not use unstable or misshapen pans on the cooking
zones; this will help to avoid accidental spills. Make sure pan
handles are turned towards the centre of the hob in order to
avoid accidental burns.
Always use oven gloves when placing cookware in the oven
or when removing it.
Do not use flammable liquids (alcohol, petrol, etc...) near the
appliance while it is in use.
Do not place flammable material in the lower storage
compartment or in the oven itself. If the appliance is switched
on accidentally, it could catch fire.
Always make sure the knobs are in the • position when the
appliance is not in use.
When unplugging the appliance, always pull the plug from the
mains socket; do not pull on the cable.
Never perform any cleaning or maintenance work without
having disconnected the appliance from the electricity mains.
If the appliance breaks down, under no circumstances should
you attempt to perform the repairs yourself. Repairs carried
out by inexperienced persons may cause injury or further
malfunctioning of the appliance. Contact Assistance.
Do not rest heavy objects on the open oven door.
The internal surfaces of the compartment (where present)
may become hot.
The glass ceramic hob is resistant to mechanical shocks, but
it may crack (or even break) if hit with a sharp object such as a tool.
If this happens, disconnect the appliance from the electricity mains
immediately and contact a Service Centre.
If the surface of the hob is cracked, switch off the appliance to
prevent electric shocks from occurring.
Remember that the cooking zones remain relatively hot for at least
thirty minutes after they have been switched off.
Keep any object which could melt away from the hob, for example
plastic and aluminium objects, or products with a high sugar
content. Be especially careful when using plastic film and aluminium
foil or packaging: if placed on surfaces that are still hot, they may
cause serious damage to the hob.
Do not place metal objects (knives, spoons, pan lids, etc.) on the
hob as they may become hot.
The appliance should not be operated by people (including
children) with reduced physical, sensory or mental capacities, by
inexperienced individuals or by anyone who is not familiar with the
product. These individuals should, at the very least, be supervised
by someone who assumes responsibility for their safety or receive
preliminary instructions relating to the operation of the appliance.
Disposal
When disposing of packaging material: observe local legislation so
that the packaging may be reused.
The European Directive 2002/96/EC relating to Waste Electrical and
Electronic Equipment (WEEE) states that household appliances
should not be disposed of using the normal solid urban waste cycle.
Exhausted appliances should be collected separately in order to
optimise the cost of re-using and recycling the materials inside the
machine, while preventing potential damage to the atmosphere and
to public health. The crossed-out dustbin is marked on all products
to remind the owner of their obligations regarding separated waste
collection.
For further information relating to the correct disposal of exhausted
household appliances, owners may contact the public service
provided or their local dealer.
Respecting and conserving the environment
You can help to reduce the peak load of the electricity supply
network companies by using the oven in the hours between late
afternoon and the early hours of the morning. The cooking mode
programming options, and particularly the “delayed cooking” mode
(see Cooking modes), make this possible.
Always keep the oven door closed when using the SPIT ROAST and
ROASTING modes. this will achieve improved results while saving
energy (approximately 10%).
Check the door seals regularly and wipe them clean to ensure they
are free of debris so that they adhere properly to the door, thus
avoiding the dispersal of heat.
This product complies with the requirements of the latest European
Directive on the limitation of power consumption of the standby
mode.
If no operations are carried out for a period of 2 minutes, the
appliance automatically switches to the standby mode.
The standby mode is visualised by the high luminosity „Watch
Icon”.
As soon as interaction with the machine resumes, the system’s
operating mode is restored.
30
GB
Switching the appliance off
Disconnect your appliance from the electricity supply
before carrying out any work on it.
Cleaning the oven
! Never use steam cleaners or pressure cleaners on
the appliance.
Clean the glass part of the oven door using a
sponge and a non-abrasive cleaning product, then
dry thoroughly with a soft cloth. Do not use rough
abrasive material or sharp metal scrapers as these
could scratch the surface and cause the glass to
crack.
The stainless steel or enamel-coated external parts
and the rubber seals may be cleaned using a
sponge which has been soaked in lukewarm water
and neutral soap. Use specialised products for the
removal of stubborn stains. After cleaning, rinse
and dry thoroughly. Do not use abrasive powders or
corrosive substances.
The inside of the oven should ideally be cleaned
after each use, while it is still lukewarm. Use hot
water and detergent, then rinse well and dry with a
soft cloth. Do not use abrasive products.
The accessories can be washed like everyday
crockery, and are even dishwasher safe.
Dirt and grease should be removed from the control
panel using a non-abrasive sponge or a soft cloth.
Stainless steel can be marked by hard water that
has been left on the surface for a long time, or by
aggressive detergents that contain phosphorus. We
recommend that the steel surfaces are rinsed well
then dried thoroughly.
Inspecting the oven seals
Check the door seals around the oven regularly. If the
seals are damaged, please contact your nearest After-
sales Service Centre. We recommend that the oven is not
used until the seals have been replaced.
Replacing the oven light bulb
To replace the oven light bulb:
1. Remove the glass cover using a screwdriver.
2. Unscrew the light bulb and replace it with a similar
one: Wattage 15 W, cap E 14.
Replace the glass cover, making sure the seal is
positioned correctly (see diagram).
Cleaning the glass ceramic hob
! Do not use abrasive or corrosive detergents (for
example, products in spray cans for cleaning barbecues
and ovens), stain removers, anti-rust products, powder
detergents or sponges with abrasive surfaces: these may
scratch the surface beyond repair.
It is usually sufficient simply to wash the hob using a
damp sponge and dry it with absorbent kitchen roll.
If the hob is particularly dirty, rub it with a special glass
ceramic cleaning product, then rinse well and dry
thoroughly.
To remove more stubborn dirt, use a suitable scraper
(this is not supplied with the appliance). Remove spills
as soon as possible, without waiting for the appliance
to cool, to avoid residues forming crusty deposits. You
can obtain excellent results by using a rustproof steel
wire sponge - specifically designed for glass ceramic
surfaces - soaked in soapy water.
If plastic or sugary substances have accidentally been
melted on the hob, remove them immediately with the
scraper, while the surface is still hot.
Once it is clean, the hob may be treated with a special
protective maintenance product: the invisible film left
by this product protects the surface from drips during
cooking. This maintenance should be carried out while
the appliance is warm (not hot) or cold.
Always remember to rinse the appliance well with clean
water and dry it thoroughly: residues can become
encrusted during subsequent cooking processes.
Care and maintenance
*
Only available in certain models.
Glass ceramic hob
cleaners
Available from
Window scraper Razor blade
scrapers
DIY Stores
Replacement blades DIY Stores,
supermarkets,
chemists
COLLO luneta
HOB BRITE
Hob Clean
SWISSCLEANER
Boots, Co-op stores,
department stores, Regional
Electricity Company shops,
supermarkets
! Do not use the oven lamp as/for ambient lighting.
GB
31
Automatic cleaning using the
PYROLYTIC cycle
During the PYROLYTIC cycle, the internal temperature
of the oven reaches 500°C. The pyrolytic cycle is
activated and burns away food and grime residues.
Dirt is literally incinerated.
Keep children away from the appliance during the
automatic cleaning cycle as surfaces may become
very hot. Particles may ignite inside the oven as a
result of the combustion process. There is no cause for
concern: this process is both normal and hazard-free.
Before initiating the PYROLYTIC CYCLE:
Remove large or coarse food residues from the
inside of the oven using a damp sponge. Do not use
detergents.
Remove all accessories.
Do not place tea towels or pot holders over the oven
handle.
Turn the SELECTOR knob to the “0” position.
! If the oven is too hot, the pyrolytic cycle may not start.
Wait for the oven to cool down.
! The programme may only be started once the oven
door has been closed.
To activate the PYROLITIC CYCLE cleaning procedure,
press and hold the
button for approximately 4
seconds. The TIMER KNOB may be used to select
the desired cleaning level; there are three default time
settings which cannot be modified.
1. Economy (ECO): turn the knob towards “-”. Duration
1 hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards “+”. Duration
2 hours.
4. Press the
button to confirm.
An end time for the PYROLITIC CYCLE (as for a normal
cooking cycle) may be programmed (see Programming
the automatic cleaning end time).
Safety devices
• The
icon on the display, when lit, indicates
that the oven door was automatically locked as soon
as the temperature reached a high value.
• The
icon indicates that the cleaning cycle
may be cancelled at any time by pressing the
button.
If a malfunction occurs, the heating elements will be
switched off.
Once the oven door has been locked, you cannot
change the duration and cycle end time settings.
Programming the automatic cleaning end time
1. Press the
button until the icon and the two
digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the hour value.
3. Press the
button again until the other two digits
on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
5. Press the
button again to confirm;
6. When the set time has elapsed, the text END
appears on the display and a buzzer sounds.
For example: it is 9:00 a.m. and the Economy
PYROLYTIC cycle has been selected: default set
time 1 hour. 12:30 is scheduled as the end time. The
programme will start automatically at 11:30 a.m.
Programming has been set when the
and
buttons are illuminated. The DISPLAY shows the
PYROLITIC CYCLE end time and duration alternately.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the
oven has cooled down sufficiently before you can open
the oven door. You will notice some white dust deposits
on the bottom and the sides of your oven; remove
these deposits with a damp sponge once the oven has
cooled down completely. Alternatively, you can make
use of the already heated oven, in which case it is not
necessary to remove the deposits, they are completely
harmless and will not affect your food in any way.
/