Woder WD-S-5K-R Replacement Cartridge To All Woder WD-5K-S Types (Gen3 Models) and WD-FRM-5K Dual Stage Models (As Stage2). WQA Certified. Made in the USA. Installation guide

Model: WD-S-5K-R Replacement Cartridge To All Woder WD-5K-S Types (Gen3 Models) and WD-FRM-5K Dual Stage Models (As Stage2). WQA Certified. Made in the USA.

WODER 5K-FRM-DC

WODER 10K-FRM-DC

WODER 5K-GEN3-DC(5K-S-DC)

WODER 10K-GEN3-DC(10K-S-DC)

WODER-10K-FRM-JG-1/4

WODER-10K-FRM-JG-3/8

WODER-10K-Gen3-JG-1/4

WODER-10K-Gen3-JG-3/8

Cartridge replacement

06/19

Write the installation date on

the filter for future references.

Place a bucket under the

Woder filter, just in case.

3 min.

Activate the filter by allowing the

water to flow for 3 minutes.

Screw in the new Woder Filter cartridge. The water cuts

back on when you screw the new filter on.

Unscrew the used Woder Filter cartridge. The

water shuts off automatically. (There are built-in

valves in the system).

Model: WD-S-5K-R Replacement Cartridge To All Woder WD-5K-S Types (Gen3 Models) and WD-FRM-5K Dual Stage Models (As Stage2). WQA Certified. Made in the USA.

This manual is also suitable for

Download PDF