Courmia GDK260 User manual

PHOTO OF PRODUCT

MODEL# GDK260

DIGITAL KETTLE

COVER

www.gourmia.com

www.Gourmia.com

The Steelstone Group

Brooklyn, NY

without written permission from The Steelstone Group, except for the inclusion of quotations in a

media review.

Although every precaution has been taken in the preparation of this manual, The Steelstone

Group assumes no responsibility for errors or omissions. Nor is any liability assumed for damages

resulting from the use of the information contained herein. Although every eort has been made

to ensure that the information contained in this manual is complete and accurate, The Steelstone

Group is not engaged in rendering professional advice or services to the individual consumer;

further, The Steelstone Group shall not be held responsible for any loss or damage allegedly

arising from any information or suggestion in this manual.

10 9 8 7 6 5 4 3 2 1

Printed in China

Welcome to the Convenience of

Digital Kettles from Gourmia!

The Gourmia Digital Kettle was designed to make boiling water easy, ecient, and

customizable. The Gourmia Digital Kettle enables you to choose the perfect water

temperature for whatever you need—from warm to boiling. And, in case you want to

save the heated water for a little while, the Gourmia Digital Kettle will keep your water

at the desired temperature for up to four hours. With a sleek, modern design and the

ultimate in functionality, the Gourmia Digital Kettle is the perfect kitchen appliance.

The following pages of this manual oer full and complete instructions for

all the functions and features of your Digital Kettle. Inside these pages, you’ll nd

information on and instructions for assembly, operating, cleaning and maintenance

of your Digital Kettle. Please read all safety instructions and complete directions

carefully for safe usage at all times.

Thank you for your purchase! We hope you will enjoy all the innovative products

brought to you by our family at Gourmia.

TABLE OF CONTENTS

SAFETY FIRST p. 6

FEATURES AND FUNCTIONS p. 8

OPERATING INSTRUCTIONS p. 9

CLEANING & MAINTENANCE p. 11

TROUBLE SHOOTING p. 12

WARRANTY & SERVICE p. 14

SAFETY FIRST

IMPORTANT SAFEGUARDS

When operating this electric appliance, basic safety instructions should always

be followed. Refer to the following for these instructions

1. READ ALL SAFETY & USAGE INSTRUCTIONS BEFORE USING.

2. Keep children away from the machine when in use.

3. Never operate the appliance with a damaged cord or plug or one that has

malfunctioned or been damaged in any way. If necessary, immediately

contact Customer Service for assistance.

4. The kettle should not be used with an external timer or a separate remote

control system.

5. Operate the appliance on a level surface well away from any hot gas or

electrical burner, heat source, combustible spray cans or pressurized items.

6. To avoid injury or death from electrical shock, do not operate the machine

with wet hands, while standing on a wet surface or while standing in water.

Also, do not use the machine outdoors or in wet conditions.

7. Do not immerse the machine directly in water to clean.

8. Do not ll the water to higher than the maximum water level.

9. When lling the kettle, make sure it is not plugged in to an electrical outlet.

10. Make sure the lid is closed before boiling water. Do not open the lid until the

boiling is nished.

11. Make sure the power to the kettle is turned o before removing the base.

12. When not in use, unplug the kettle.

13. Only use the base that accompanied the kettle.

14. This machine is for household use only. Any other use will void the warranty.

SAVE THESE INSTRUCTIONS

6 7

FOR HOUSEHOLD USE ONLY

Electrical 3-conductor Cord Set:

Appliance is equipped with a

3-conductor cord set that has a 3 prong

grounding-type plug. It should be

properly connected to a grounding-type

a 3-grounding outlet unit, and as such,

the grounding prong should never be

removed. If needed, purchase a 2-prong

adapter and ground it to the outlet.

Do not use an adapter unless you are

for assistance.

A short power cord or a detachable power

cord is provided to reduce the risks of resulting

from becoming entangled in or tripping over a

longer cord accidentally.

OPERATING INSTRUCTIONS

BEFORE USING FOR THE FIRST TIME

1. Remove all of the various packaging,stickers or accessories from both the

inside and outside of the kettle.

2. Adjust the length of the cord by winding it under the base. Wedge the cord

into the notch.

BOILING WATER

1. Open the lid of the kettle, add water and close the lid.

Note: You must add at least enough water to go above

the Min level but less than the Max level.

2. Plug the base into the electrical outlet and place the lled

kettle onto the base. The kettle is on standby and only the

I/O and + & - buttons can be used.

3. Choose the desired water temperature:

• Boil water--Press I/O. The kettle will begin the boiling process.

• Heat water to a specic water temperature--Press + or – and a temperature

appears on the LCD starting with 104°F. Press + or – again to increase or

decrease the desired water temperature. Press I/O and the kettle begins to heat

the water.

Note: If you don’t press I/O within 10 seconds, the kettle returns to standby

mode.

4. At any time during the boiling process, you can increase or decrease the

desired water temperature by pressing + or –.

5. Once the water reaches the desired temperature, the kettle stops the

process. After approximately 2 minutes, the LED display turns o and the kettle

returns to standby mode.

8 9

OPERATING INSTRUCTION

HOLDING HOT WATER AT A SPECIFIC TEMPERATURE

1. Fill with water up to Max level.

2. Press the Keep Warm button and press + or – to increase or decrease the

desired water temperature.

Note: The highest temperature that the kettle can hold is 194°F.

3. Press I/O. The kettle starts the boiling process. When the water reaches the

desired temperature, the kettle holds the water at that temperature for 4 hours.

Note: If you don’t press I/O within 10 seconds, the kettle returns to standby

mode.

At any time during the boiling process, you can increase or decrease the desired

water temperature by pressing + or –.

FEATURES AND FUNCTIONS

CONTROL PANEL

A. Lid

B. Control Panel

C. Handle

D. Power Cord

E. Spout

F. Water Gauge

G. Body

H. Base

°F

CLEANING AND MAINTENANCE

BEFORE USING FOR THE FIRST TIME

1. Remove all of the various packaging,stickers or accessories from both the

inside and outside of the kettle.

2. Adjust the length of the cord by winding it under the base. Wedge the cord

into the notch.

BOILING WATER

1. Open the lid of the kettle, add water and close the lid.

Note: You must add at least enough water to go above

the Min level but less than the Max level.

2. Plug the base into the electrical outlet and place the lled

kettle onto the base. The kettle is on standby and only the

I/O and + & - buttons can be used.

3. Choose the desired water temperature:

• Boil water--Press I/O. The kettle will begin the boiling process.

• Heat water to a specic water temperature--Press + or – and a temperature

appears on the LCD starting with 104°F. Press + or – again to increase or

decrease the desired water temperature. Press I/O and the kettle begins to heat

the water.

Note: If you don’t press I/O within 10 seconds, the kettle returns to standby

mode.

4. At any time during the boiling process, you can increase or decrease the

desired water temperature by pressing + or –.

5. Once the water reaches the desired temperature, the kettle stops the

process. After approximately 2 minutes, the LED display turns o and the kettle

returns to standby mode.

10 11

CLEANING YOUR KETTLE

• Before cleaning the kettle, make sure it is unplugged from any electrical

outlets. Also, let the kettle cool down before cleaning.

• Do not immerse the kettle, the power cord, power plug, or power socket

into water.

• Wipe the outside of the kettle with a damp cloth.

• Do not use a scouring powder or other cleaning product on the kettle as it

could damage the surface.

DESCALING

To keep the kettle working well, you should descale regularly, preferably at least

once a month or more frequently if your water is very hard.

There are three dierent ways you can descale your kettle.:

Using white vinegar:

1. Fill the kettle with 2 cups of vinegar.

2. Let the vinegar soak in the kettle for 1 hour. Do not turn on the kettle during

this time.

3. Pour out the liquid and rinse 5 or 6 times.

Using citric acid:

1. Boil 2 cups of water in the kettle.

2. Add 5 teaspoons of citric acid and let it soak for 15 minutes.

3. Pour out the liquid and rinse 5 or 6 times.

Using a descaler:

1. Use a descaler specically for plastic kettles and follow the manufacturer’s

instructions.

2. Empty your kettle and rinse 5 or 6 times. Repeat if necessary.

CLEANING YOUR KETTLE

OPERATING INSTRUCTIONS

OPERATING INSTRUCTION

HOLDING HOT WATER AT A SPECIFIC TEMPERATURE

1. Fill with water up to Max level.

2. Press the Keep Warm button and press + or – to increase or decrease the

desired water temperature.

Note: The highest temperature that the kettle can hold is 194°F.

3. Press I/O. The kettle starts the boiling process. When the water reaches the

desired temperature, the kettle holds the water at that temperature for 4 hours.

Note: If you don’t press I/O within 10 seconds, the kettle returns to standby

mode.

At any time during the boiling process, you can increase or decrease the desired

water temperature by pressing + or –.

TROUBLE SHOOTING

12 13

TROUBLE SHOOTING

In the unlikely event that you experience a problem with your device,

please take a couple of minutes to check these possible causes prior to

contacting customer support.

TROUBLE SHOOTING

Problem:

The kettle does not work or stops before coming to the boil.

Possible Causes:

• Check that your kettle is properly connected.

• The kettle has been switched on without water.

• An accumulation of scale has caused the overheat cut-out to operate:

Solutions:

• Allow the kettle to cool for at least 15 minutes and ll it with water.

• Descale rst if scale has accumulated.

• Switch the kettle on.

Problem:

The water tastes of plastic.

Possible Causes:

Generally, this happens when the kettle is new.

Solutions:

Discard the water from the rst few boilings.

If the problem persists, ll the kettle to maximum and add two teaspoons of

baking soda. Bring to a boil and descale the water. Rinse the kettle thoroughly.

Problem:

The kettle has been dropped, it leaks, or there is damage to the power cord, plug,

or base of the kettle.

Solutions:

• Do not use the kettle. No attempt must be made to dismantle the kettle or its

safety devices.

• If the supply cord is damaged, it must be replaced by the manufacturer, its

after-sales service center or a similarly qualied person, in order to avoid any

danger.

• Return your kettle to your local After-Sales Service Center; only they are

authorized to carry out repairs. See the guarantee conditions and list of centers

in the booklet supplied with your kettle. The type and serial number are shown

on the bottom of your kettle. This guarantee covers manufacturing defects and

domestic use only. Any breakage or damage

resulting from failure to comply

with the instructions for use is not covered by the guarantee.

• Reserves the right to modify the characteristics or components of its kettles at

any time in the interest of the consumer.

ACCIDENT PREVENTION

• Position the kettle and its supply cord well to the rear of the work surface,

out of the reach of children.

• If an accident does occur, run cold water over the scald immediately and call a

doctor if necessary.

• For a child, a burn or scald, even if slight, can sometimes be serious.

• In order to avoid any accident: do not carry your child or baby at the same time

as drinking or carrying a hot drink.

TROUBLE SHOOTING WARRANTY AND SERVICE

WARRANTY & SERVICE

For Customer Service or Questions, Please call: 888-552-0033

www.gourmia.com

14 15

DISPOSAL OF THE DEVICE

PROTECTION OF THE ENVIRONMENT

At the end of the life of your product, it should go to a specially adapted

waste-recycling center.

ENVIRONMENT PROTECTION FIRST

1. The symbol on the product or on its packaging indicates that this

product may not be treated as household waste. Instead it should be handed

over to the applicable. Collection point for the recycling of electrical and

electronic equipment.

2. By ensuring this product is disposed of correctly, you will help prevent

potential negative consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of this product.

For more detailed information about the recycling of this product, please contact

your local council oce or your household waste disposal service.

This Limited Warranty is for one full year from the date of purchase. It is

applicable to the original purchaser only and is not transferable to a third party

user. Repair or replacement of defective parts is solely at the seller’s discretion.

In the event that repair isn’t possible, the seller will replace the product/part. If

product repair/replacement won’t suce, the seller has the option of refunding

the cash value of the product or component returned.

Product defects not covered under the Warranty provisions include normal

wear and damage incurred from use or accidental negligence, misuse of

instruction specications or repair by unauthorized parties. The manufacturing

company is not liable for any incidental or consequential damages incurred by

such circumstances.

Courmia GDK260 User manual

Other documents