Moen T3292-3520-L Dimensions Guide

Category
Faucets
Type
Dimensions Guide
M•pact System
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
1943060560320B687A
Rev. 5/16
ALIGN MOENTROL®
Single-Handle Tub/Shower Trim Only
Models: T3291 series - valve trim only
T3292 series - shower trim only
T3293 series - tub/shower trim
Valves: 63100, 3500 Series
6-25/32"
(173mm)
7"
(178mm)
7-13/32"
(188mm)
7-1/8"
(182mm)
2-27/32"
(13mm)
FAUCET DESCRIPTION
Metal construction with chrome plated or brushed nickel finishes
Includes showerhead, arm, flange and diverter spout
OPERATION
Lever style handle with temperature indicator on the
escutcheon, pull-on/push-off operation
Temperature operates through an 180° arc of handle
travel (full cold to full hot)
Adjustable temperature limit stop to control maximum
hot water temperature
Pressure balancing mechanism maintains selected
discharge temperature to ±
FLOW
Showerhead limited to 2.5 gpm (9.5 L/min)
NH Suffix models contain no showerhead
CARTRIDGE
1225® cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to ASME A112.18.1/CSA B-125-1,
and all applicable requirements referenced therein
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
7" (178mm)
MIN.
HOT
INLET
COLD
INLET
FINISHED
WALL LINE
C
5-1/2"
(140mm)
WALL OPENING
FLOOR
TUB RIM
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-1/16" (52mm) MAX.
1-7/16" (37mm) MIN.
H
C
L
1-3/4" (44mm)
Rev. 6/02
MOENTROL
®
VALVE
Pressure-Balancing Valve with
Volume Control
Models: 3510 (IPS),3520 (CC) - Single Pack
63110 (IPS), 63120 (CC) - Bulk Packed
(Bulk packed 12 per carton)
NOTE: See reverse side
for illustrated parts
DESCRIPTION
Brass construction
Pressure balancing, four port valve design with volume
control and integral checks, 1/2” CC or IPS
connections
OPERATION
Adjustable temperature limit stop to control
maximum hot water temperature
Pressure balancing mechanism maintain selected
discharge temperature to ± 2°F
CARTRIDGE
1225 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all applicable requirements
referenced therein and complies with the applicable
requirements of ANSI A117.1
WARRANTY
Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
5 year warranty if used in commercial installations
  • Page 1 1
  • Page 2 2

Moen T3292-3520-L Dimensions Guide

Category
Faucets
Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI