Gibraltar Building Products RSG User manual

METAL ROOFING ITEMS: Must be stored properly in transit or on the job site.

DO NOT: Store metal roofing panels, trims, flashing or roof edges in an open area

where moisture can accumulate.

ALWAYS COVER: Bundle metal products with breathable tarps (not plastic) and

store on a slant for water drainage.

WARRANTY: Failure to comply with these procedures relieves the manufacturer of

responsibility for and resultant damages to or deterioration of the product voids all

warranties. There is no implied warranty of merchantability or fitness for purpose.

Warning! Sharp Edges!

CAUTION! SHARP EDGES

Wear protective eyewear, clothing and gloves

CAUTION!

Working above grade is inherently dangerous, be sure that proper fall protection

measures are in place. When working with power tools and sheet metal, gloves

and eye protection are absolutely required.