Dekorra 123-RB Installation guide

Step 1.

Identify where the rock will be

placed and which direction fits

best for your application as well

as best visual appeal obtained by

rock placement.

Step 2.

Test fit rock in place over object

to be covered. Remove and pull

back decorative stone or mulch

from area the rock will cover.

Step 3.

Remove stake kit from inside

Mock rock. Reposition Mock

Rock into acceptable location

over object to be covered.

Step 4.

Install plastic stakes or optional

anchors through stake flange

locations until flush at the

flange.

Step 5.

Replace mulch and or decorative

stone over the base of the rock as

well as over the stake flanges.

Dekorra Mock Rock

Installation Instructions

Parts List

1 Dekorra Mock Rock artificial rock enclosure

1 Installation stake kit (located inside rock)

Dekorra Products

888-635-8585

info@dekorraproducts.com