Quick Set Up
Read Before Use
Install Batteries
Install 2 x AA batteries by
removing the back cover
and placing batteries in
the battery compartment
as shown.
DRC-605
1
Press and push the back cover in the direction of the arrow to remove.
NOTE: If the cover sticks, you may need to use a paper clip
or screw driver to help pry it open.
Set Time - Hold down the MODE button until the
YEAR display flashes. Press UP (+) or DOWN (-) to
enter the year then press the MODE button again
to set and move on to the next parameter.
2
NOTE: The time must be set manually after battery installation.
Once set up, the unit will sync nightly with your local
weather station.
Set Time Zone - Hold down the UP ( + ) button
until your time zone is displayed.
Initial Set Up
Continue setting month, date, hour, minutes, and
temperature display format.
For further questions, email us at
[email protected]om www.datexx.com
/