Dixon DB510TA and DB510TI-Series Drop Tees are designed to handle pressure up to 50 PSI. They are easy to operate and maintain, requiring only standard grease for lubrication. The tee handle can be rotated counter clockwise to release the hatch and allow access to the inside of the tee. The hatch can then be closed by sliding the tee handle guard up the ramp and tightening the handle clockwise. Periodic checks for wear should be done, as the tee will wear over time. These drop tees are a valuable tool for controlling the flow of materials in a variety of applications.
Dixon DB510TA and DB510TI-Series Drop Tees are designed to handle pressure up to 50 PSI. They are easy to operate and maintain, requiring only standard grease for lubrication. The tee handle can be rotated counter clockwise to release the hatch and allow access to the inside of the tee. The hatch can then be closed by sliding the tee handle guard up the ramp and tightening the handle clockwise. Periodic checks for wear should be done, as the tee will wear over time. These drop tees are a valuable tool for controlling the flow of materials in a variety of applications.
Dixon DB510TA and DB510TI-Series Drop Tees are designed to handle pressure up to 50 PSI. They are easy to operate and maintain, requiring only standard grease for lubrication. The tee handle can be rotated counter clockwise to release the hatch and allow access to the inside of the tee. The hatch can then be closed by sliding the tee handle guard up the ramp and tightening the handle clockwise. Periodic checks for wear should be done, as the tee will wear over time. These drop tees are a valuable tool for controlling the flow of materials in a variety of applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI