Ivation IVAPAC10KBTU User manual

Ivation
Brand
Ivation
Model
IVAPAC10KBTU
Type
User manual

This manual is also suitable for

Hung Window Sliding Window
Windows Type
Window slider A Window slider B
Bolt
Window slider A
Window slider A
Portable Air Conditioner
QUICK START GUIDE
IVAPAC8KBTU
IVAPAC10KBTU
IIVAPAC12KBTU
Before installing your air conditioner, make sure that you have the following tools (not included):
• Medium Phillips screwdriver
• Tape measure or ruler
• Knife or scissors
1. Check to box and ensure that all parts are accounted for:
1. Unit adapter
2. Exhaust hose
3. Window slider adapter
4. Bolt
5. Window slider A
6. Window slider B
7. Adhesive foam seal A (2)
8. Adhesive foam seal B (2)
9. Foam seal C
10. Security bracket
11. Screws (2)
12. Drain hose
13. Remote controller with 2 AAA batteries
1
6
10 11 1312
789
2345
2. Check the window length and type
Measure the length of the window, then choose the slider that
will fit. If 2 sliders are needed, use the bolt to fasten them.
3. Prepare the exhaust hose assembly
Insert the exhaust hose into the window slider adapter and
unit adapter. Then clamp together with the elastic buckles
of the adapter.
Unit adapter Window slider
adapter
Exhaust hose
Exhaust hose
assembly
4. Install the exhaust hose assembly
Connect the exhaust hose assembly as seen below.
Be sure that the hook of the adapter is aligned with the
hole seat of the air outlet.
Make sure that the adapter is inserted into the lower groove
of the air outlet.
5. Cut the adhesive foam seals A and B to the appropriate
length, depending on the size of the window. Attach
them to the window sash and frame as shown.
6. Cut the non-adhesive foam seal C to match the width of
the window. Then insert the seal between the glass and
the window frame.
8. Insert the window slider adapter into the hole of the
window slider.
For a more detailed explanation on installing your
Ivation Portable Air Conditioner, please consult the
full user guide.
7. Install the security bracket with 2 screws as
shown (optional).
Hook
Hole Seat
Lower groove
adapter
Type round
Type square
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Foam seal C
(Non-adhesive type)
2 Screws
Security Bracket
Distributed by
C&A Marketing, Inc.
114 Tived Lane East
Edison, NJ 08837 USA
Europe: C&A Europe
167 Hermitage Road
Crusader Industrial Estate
London N4 1LZ
United Kingdom
[email protected]
Made in China
Ivation and the Ivation logo are registered
trademarks of C&A Holdings, LLC in the U.S.
©2017 All rights reserved
Customer service
info@myivation.com
866-849-3049
  • Page 1 1
  • Page 2 2

Ivation IVAPAC10KBTU User manual

Ivation
Brand
Ivation
Model
IVAPAC10KBTU
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents