Legrand RC7APTCGY Installation guide

Brand: Legrand

Model: RC7APTCGY

Type: Installation guide

This manual is also suitable for

RC7 P

oke-Thru Abandonment Plate

Cat. No. RC7AP

INSTALLATION INSTRUCTIONS

Walker

electrical systems conform to and should be

properly grounded in compliance with requirements of

the current National Electrical Code or codes adminis-

tered by local authorities.

All electrical products may present a possible shock or

fire hazard if improperly installed or used. Walker elec-

trical products may bear the mark as UL Listed and/or

Classified and should be installed in conformance with

current local and/or the National Electrical Code.

Products Covered: RC7APBK and RC7APVY

Punch Out Center Hole

Remove Cover

Attach Plate Using Screw Provided

Step 2

Step 1

Step 3

Option 1 – With Receptacle In Place:

Walker Systems, Inc.

1000 Innovation Drive, Williamstown, WV 26187

Remove Cover, Receptacle and Receptacle

Wires or Conduit Adapter Assembly

Punch Out Both End Holes

Place Intumescent Wafers

Step 1

Step 2

Step 3

Attach Plate Using Screws Provided

Step 4

Option 2 – With Receptacle Out:

Legrand RC7APTCGY Installation guide

Brand: Legrand

Model: RC7APTCGY

Type: Installation guide

This manual is also suitable for

Download PDF

report

Legrand RC7APTCGY Installation guide

This manual is also suitable for

Legrand RC7APTCGY Installation guide

Related papers

Other documents