EXSHOW EXH54G02-Black-mx Installation guide

Brand
EXSHOW
Model
EXH54G02-Black-mx
Type
Installation guide
Our Service
If you have any question,please feel free to
contact us.It is our pleasure to service you.
[email protected]
Kyle Liao-1992
new-chao
What’s in the box ?
1 X Phone Holder
1 X Suction Cup Mount
1 X Support Pad
with PU sticker
Instruction
1. Inster the locking nut into
the mount ball joint adapter.
2. Insert the ball into the socket
at the back of phone holder,
turn the nut to tigthen.
3. Push suction cup firmly
against windshield and press
the lever to lock.
(Note:tear off the protective film
before install the mount)
5.0 CM
1.9 inch
30 CM
1.3CM
12 inch
Specification
7.1 CM
2.8 inch
11.7-19CM
4.6-7.5 inch
Long Arm Car Mount Holder
Clamp arm
Lock lever
Suction cup
Support pad
Locking nut
Gooseneck
4. Lift up the mount from holder
to put support pad under the
mount.
5.Put your device into bracket
then grip. Adjust the angle to
fit your optimal viewing angle.
Horizontal or vertical
warm reminder:
A.
To let the mount be more stable
while driving,it is suggested to
set the support pad closer to
the bracket,as shown in position1.
B.
It will be more stable that if you
peel off the film under the support
pad and then stick on dashboard.
1
2
What’s in the box ?
1 X Magnetic Head
1 X Suction Cup Mount
1 X Rectangular Metal Plate
with Charpie Protective
2 X Round Metal Plate
with 3M Sticker
1 X Transparent Protective Film
5.0 CM
1.9 inch
30 CM
1.3CM
12 inch
Specification
7.1 CM
2.8 inch
Long Arm Magnetic Phone Holder
Magnetic head
Lock lever
Suction cup
Support pad
Locking nut
Gooseneck
4.2 CM
1.65 inch
4.5 CM
1.8 inch
6.5 CM
2.6 inch
Our Service
If you have any question,please feel free to
contact us.It is our pleasure to service you.
[email protected]
Kyle Liao-1992
new-chao
Instruction
Choice of Metal Plate
1. Inster the locking nut into
the mount ball joint adapter.
2. Insert the ball into the socket
at the back of phone holder.
3 Turn the nut to tighten the
magnetic head.
4. Push suction cup firmly
against windshield and press
the lever to lock.
(Note:tear off the protective film
before install the mount)
(Note:please use the phone which
the metal plate was attached on it)
5. Lift up the mount from head
to put support pad under the
mount.
6.Put your phone directly on the
magnetic head,and adjust the
angle to fit your optimal viewing
angle.Horizontal or vertical
warm reminder:
1
2
Before instruction,you have to choose the appropriate
metal plate to fit different “phone style”.
A.Phone without case:use round metal plate and
protective film.
B.Phone with thin case:use rectangular metal plate.
C.Phone with thick case:use round metal plate.
stick transparent protective film
to back of phone,and then stick
round metal plate on the film.
Put rectangular metal plate
directly into phone case
(metal plate is between the
phone and case)
Stick round metal plate to the
phone case directly.
A.
To let the mount be more stable
while driving,it is suggested to
set the support pad closer to
the bracket,as shown in position1.
B.
It will be more stable that if you
peel off the film under the support
pad and then stick on dashboard.
1 X Support Pad
with PU sticker
  • Page 1 1

EXSHOW EXH54G02-Black-mx Installation guide

Brand
EXSHOW
Model
EXH54G02-Black-mx
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents