2. Toro
  3. Carriage Sensor Flag Kit, 2226 Directional Drill

Toro Carriage Sensor Flag Kit, 2226 Directional Drill Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Carriage Sensor Flag Kit, 2226 Directional Drill Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3428-447RevA
CarriageSensorFlagKit
2226DirectionalDrill
ModelNo.139-2485
InstallationInstructions
InstallingtheCarriage-SensorFlag
1.Movethecarriageallthewaytotherearofthethrustframeandraisethethrustframe(Figure1).
2.Movethemachinetoalevelsurface,shutofftheengine,removethekey,turnthebatterydisconnect
switchtotheOFFposition,andwaitfortheenginetocool;refertotheOperator’sManual.
g274914
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3428-447*A
3.Removethecurrentag.
g274915
4.Apply(blue)thread-lockingadhesivetotheboltsandinstallthenewag.
5.Torquetheboltsto7to9N∙m(67to83in-lbs).
g274917
2
6.Startthemachineandslowlymovethecarriageforwardsotheagisoverthesensor.
7.Adjustthesensorsothegapis0.23to0.38cm(0.09to0.15inch).
g274913
1.Gap0.23to0.38cm(0.09to0.15inch)2.Sensoradjustmentnuts
8.Torquethesensornutsto18to22N∙m(13-1/2to16-1/2ft-lbs).
3
/