Greenworks GW80VSNW200 Owner's manual

Brand: Greenworks

Model: GW80VSNW200

Type: Owner's manual

This manual is also suitable for

2600402

Read all safety rules and instructions carefully before operating this tool.

Owner’s Manual

TOLL-FREE HELPLINE: 1-888-90WORKS

(888.909.6757)

www.GreenWorksTools.com

80V Cordless Snow Thrower

2600402

GW80VSNW200

Contents .............................................................................................................................. 2

Product specications .......................................................................................................... 2

Safety information ............................................................................................................. 3-5

Symbols ............................................................................................................................ 6-7

Know your snow thrower ...................................................................................................... 8

Assembly ........................................................................................................................ 9-14

Operation ...................................................................................................................... 15-18

Maintenance ................................................................................................................. 19-22

Troubleshooting ................................................................................................................. 23

Warranty ............................................................................................................................ 24

Exploded View / Parts List ............................................................................................ 25-28

PRODUCT SPECIFICATIONS

80V CORDLESS SNOW THROWER

Motor .............................................................................................. 80V brushless motor

Battery type ............................................................................................ 80V Lithium-ion

No-load speed ................................................................................................1,8 0 0 RPM

Working width ......................................................................................................... 20 in.

Wheels ..................................................................................................................... 7 in.

Weight (without battery) .......................................................................................33.5 lbs

CONTENTS

SAFETY INFORMATION

FOLLOW THESE RULES WHILE OPERATING THE SNOW THROWER

IMPORTANT

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below

may result in electric shock, re, and/or serious personal injury.

• Walk. Do not run.

• Verify that the snow thrower is not in contact with anything before turning it on.

• Stay away from the discharge chute and impeller openings at all times. Keep face, hands, and

feet away from concealed, moving, or rotating parts.

• Be attentive when using the snow thrower, and stay alert for holes in the terrain and other

hidden hazards or trafc.

• Do not use the snow thrower on a gravel or crushed rock surface. Use extreme caution when

crossing gravel/crushed rock drives, walks, or roads.

• Move up and down slopes when clearing snow. Do not go across a slope. Use caution when

changing direction. Do not use this snow thrower to clear snow from steep slopes.

• Do not attempt to use the snow thrower on a roof or on any steeply inclined slippery surface.

• Do not operate the snow thrower if the guards, plates, and other safety protective devices are

not in place.

• Do not operate the snow thrower near glass enclosures, automobiles, trucks, window wells,

drop-offs, etc. without properly adjusting the angle of the snow discharge. Keep children and

pets away from the work area.

• Do not force or overload the snow thrower. The snow thrower will perform better and safer

when it is used at the rate that it was designed to work at.

• Do not operate the snow thrower at high speeds on slippery surfaces. Look behind when

backing up and exercise caution.

• Do not direct the discharge toward anyone. Do not allow anyone to move in front of the snow

thrower while it is in use.

• Wear safety glasses or goggles that meet ANSI Z87.1 standards.

• Use the snow thrower in daylight or in good articial light. If using at night, turn on the LED

lights and be aware of your surroundings.

• To avoid accidental start-ups, remain in the starting position when turning the snow thrower

on. The operator and the snow thrower must be in a stable position during start-up. See the

section titled Starting/Stopping Instructions.

• Use this snow thrower only for the purposes it was designed.

• Do not overreach. Always keep proper footing and balance.

• Hold the snow thrower with both hands while it is in use. Keep a rm grip on the handles.

• If the impeller does not rotate freely due to ice, thaw the snow thrower thoroughly before

attempting to use it.

• Keep the impeller clear of debris.

SAFETY INFORMATION

• Do not attempt to clear the impeller while the motor is running.

• Keep clothing and body parts away from the impeller.

• Stop the motor when stopped or when moving from one location to another.

• Remove the battery pack when it is being transported and when it is not in use.

• After striking a foreign object, turn the snow thrower off and remove the battery pack, and then

inspect it for damage. Repair any damage before restarting and using the snow thrower.

• If the snow thrower starts to vibrate abnormally, stop the snow thrower immediately and attempt

to determine the cause. Vibration is generally an indication of danger.

• Stop the motor and remove the battery pack whenever the operator is not in the operating

position, before unclogging the impeller, and before making any repairs, adjustments, or

inspections.

• Do not discharge snow onto public roads or near moving trafc.

• Allow the snow thrower to run for a few minutes after clearing snow in order to prevent moving

parts from freezing.

• Only use identical replacement parts and accessories for this snow thrower. The use of

nonidentical parts or accessories could lead to serious injury to the user or damage the snow

thrower, and will void the warranty.

• Do not pick up the snow thrower while it is running. The snow thrower is designed to travel

along the ground.

• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.

• Wear rubber boots when operating the snow thrower.

• Operation of the snow thrower in the hand-held position is unsafe, except in accordance with

the special instructions for such use provided in the operator’s manual.

• Store Idle Snow Throwers Indoors – When not in use, snow throwers should be stored indoors

in dry, locked-up place – out of reach of children.

GENERAL SAFETY RULES

• Verify that the snow thrower is secure while transporting.

• Store the snow thrower in a dry area that will prevent unauthorized use or damage. Keep out

of the reach of children.

• Keep handles dry, clean, and free of debris. Clean the snow thrower after each use. Refer to

the Maintenance Section in this manual for more information.

• If the labels on the snow thrower become defaced or start to lift off, contact the toll-free

helpline, at 1-888-909-6757.

• Keep these instructions in a safe place for future reference. Refer to them often, and use them to

instruct other users. Anyone who uses this snow thrower must read these instructions carefully.

• Maintain the snow thrower with care. Follow the instructions for lubricating and changing

accessories.

SAFETY INFORMATION

CAUTION

USE ONLY GREENWORKS APPROVED REPLACEMENT BATTERIES, OTHER BATTERIES

MAY CAUSE INJURY OR DAMAGE TO THE SNOW THROWER. USE ONLY WITH

GREENWORKS 80V BATTERIES (Model#: 2901302) and GREENWORKS 80V CHARGER

(Model#: 2901402).

WARNING(PROPOSITION 65)

Some dust created by power sanding, sawing, grinding, drilling and other construction activities

contains chemicals known to the state of California to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To

reduce your exposure to these chemical: work in a well ventilated area, and work with approved

safety equipment, such as those dust masks that are specially designed to lter out microscopic

particles.

SAVE THESE INSTRUCTIONS

Some of the following symbols may be used on this product. Please study them and learn their

meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS

SYMBOL DESIGNATION/EXPLANATION

V Voltage

A Current

Hz Frequency (cycles per second)

Wh Watt Hour - Energy Storage Capacity

Ah Amp Hour - Current Capacity

AC Alternating current

DC Direct current

Type or a characteristic of current

RPM Revolutions per minute

Double-insulated construction

/min Revolutions, strokes, surface speed, orbits etc., per minute

Indicates a potential personal injury hazard.

To reduce the risk of injury user must read and understand operator’s manual

before using this product.

Always wear safety glasses with side shields that are marked to comply with

ANSI Z87.1.

Stop the motor and remove the battery before leaving the machine.

Thrown objects can ricochet and result in personal injury or property damage

Danger – Keep hands and feet away from openings while the machine is running.

Do not use hands to unclog chute. Stop motor and remove the battery before

removing debris.

Keep hands, feet away from the discharge area.

Keep bystanders a safe distance from the machine.

Stay away from moving parts. Keep all guards and shields in place.

STOP

The following signal words and meanings are intended to explain the levels of risk associated

with this product.

SYMBOL SIGNAL MEANING

DANGER Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation, which, if not avoided,

may result in minor or moderate injury.

CAUTION (Without Safety Alert Symbol) Indicates a situation that may

result in property damage.

SYMBOLS

SAVE THESE INSTRUCTIONS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please

recycle where facilities exist. Check with your local authority or retailer for recycling

advice.

The battery contains material which is hazardous to you and the environment. It must

be removed and disposed of separately at a facility that accepts lithium-ion batteries.

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualied

service technician. For service we suggest you return the product to your nearest AUTHORIZED

SERVICE CENTER for repair. When servicing, use only identical replacement parts.

WARNING

To avoid serious personal injury, do not attempt to use this product until you have read this

Owner's Manual thoroughly and understand it completely. If you do not understand the warnings

and instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline (1-

888-909-6757) for assistance.

WARNING

The operation of any power tool can result in foreign objects being thrown into your

eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shields and, when needed, a

full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or

standard safety glasses with side shields. Always use eye protection which is marked

to comply with ANSI Z87.1.

KNOW YOUR SNOW THROWER

Fig. 1

Read this operator's manual and safety rules before operating your snow thrower. Compare the

illustration in Figure 1 to your snow thrower in order to familiarize yourself with the location of

various controls and adjustments. Save this manual for future reference.

Greenworks

80V Charger

(Model#:2901402)

Battery

compartment

Greenworks

80V Battery

(Model#:2901302)

LED lights

Upper handle

Middle handle

Carrying or lifting

handle (For

transport only)

Chute

control rod

Lower handle

Wheel

Handle bar

Bail switch

Impeller

Scraper

Chute deector

Cam lock

Discharge chute

Safety switch

button

UNPACKING

• Carefully remove the product and any accessories from the box. Make sure that all items

listed in the packing list are included.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily

operated the product.

• If any parts are damaged or missing, please call 1-888-909-6757 for assistance.

PACKING LIST

• Snow thrower

• Upper chute control rod

• Lower chute control rod

• Middle handle assembly

• Chute deector

• Greenworks 80V Battery (Model#: 2901302)

• Greenworks 80V Charger (Model#: 2901402)

• (2) Cam locks

• (2) Bolts

• (4) Handle knobs

• (1) Hitch pin

• Owner's Manual

WARNING

If any parts are damaged or missing, do not operate this product until the parts are replaced.

Failure to heed this warning could result in serious personal injury.

WARNING

Do not install the battery until assembly is complete. Failure to comply could result in accidental

starting and possible serious personal injury.

WARNING

Do not attempt to modify this product or create accessories not recommended for use with this

product. Any such alteration or modication is misuse, and could result in a hazardous condition

leading to possible serious personal injury.

ASSEMBLY INSTRUCTIONS

WARNING

Do not allow familiarity with this product to make you careless. Remember that a careless

fraction of a second is sufcient to inict serious injury.

WARNING

Do not use any attachments or accessories not recommended by the manufacturer of this product.

The use of attachments or accessories not recommended can result in serious personal injury.

ASSEMBLING THE HANDLE (See Figure 2)

• Align the holes (4) on the middle handle (2) and the lower handle (3). Insert the bolts (5), and

use the handle knobs (6) to tighten them.

• Align the hole (7) on the middle handle (2) and the upper handle (1). Insert the cam locks (8)

and tighten them with the handle knobs (9) provided. Once tightened, close the cam locks to

secure them in place.

NOTE: If the upper handle is loose or separated from the middle handle, tighten the cam lock handle knobs

by turning them clockwise. Do not overtighten the handle knobs.

ASSEMBLY INSTRUCTIONS

Fig. 2

6 5

ASSEMBLING THE DISCHARGE CHUTE (See Figure 3)

Push the chute deector (1) until the latching tabs (2) on both sides click into the slots (3) and the

posts (4) on both sides click into the keyed holes (5).

ASSEMBLY INSTRUCTIONS

Fig. 3

INSTALLING THE CHUTE CONTROL ROD (See Figure 4)

• Position the discharge chute (1) so that it faces forward.

NOTE: Align the arrow (2) on the discharge chute with the arrow on the housing.

(Fig. 4.1)

• Align the holes (3) on the upper chute control rod (4) with the holes on the lower chute control

rod (5). Insert the hitch pin (6). Insert the end of the chute control rod (7) through the keyed

hole (8) in the bracket that is attached to the top of the middle handle. (Fig.4.2)

• Ensure that the handle (9) of the chute control rod points upward, and insert the rod into the

keyed hole (10) in the back of the housing. (Fig.4.3)

• Firmly push the rod into the keyed hole in the back of the housing until it snaps into place.

ASSEMBLY INSTRUCTIONS

Fig. 4.1

Fig. 4.2

• Rotate the handle on the chute control rod to ensure that it moves in the same direction as the

chute. (Fig.4.4)

ASSEMBLY INSTRUCTIONS

Fig. 4.4

Fig. 4.3

ASSEMBLY INSTRUCTIONS

TO INSTALL BATTERY PACK (See Figure 5)

• Open the battery compartment cover (1).

• Slide the battery (2) down to lock it into position. The battery is fully inserted into the snow

thrower when you hear an audible "click".

• Close the battery compartment cover (1).

Fig. 5

TO REMOVE BATTERY PACK (See Figure 5)

• Ensure that the impeller has come to a complete stop.

• Release your grip on the bail to stop the snow thrower.

• Press the battery release button (3) on the snow thrower. This will cause the battery to raise

out of the tool slightly.

• Remove battery pack from the snow thrower.

OPERATING INSTRUCTIONS

POWERING ON AND OFF (See Figure 6)

• To power on, rst press the safety switch button (1).

• While pressing the safety switch button with one hand, use your other hand to simultaneously

pull the bail switch (2) toward you. Once the machine powers on, release the safety switch

button and proceed with operation. The snow thrower can only be started by pressing the

safety switch button rst, followed by squeezing the bail switch; reverse operation will not start

the machine.

• To power off, release your grip on the bail switch.

CAUTION

Do not attempt to override the operation of the safety switch button or bar lever.

WARNING

The operation of any snow thrower can result in foreign objects being thrown into the eyes, which

can cause severe eye damage. Always wear safety glasses while operating the snow thrower

and while performing any adjustments or repairs.

WARNING

Keep bystanders a safe distance from the machine.

INSPECT THE CLEARING AREA. Remove all stones, sticks, wire, bones, and other debris that

might be thrown by the rotating impeller.

Fig. 6

OPERATING INSTRUCTIONS

UTILIZING THE LED LIGHTS (See Figure 7)

• To utilize the LED lights (1) for night time snow removal, activate the LED light switch (2).

NOTE: After you have nished using your snow thrower, remember to turn off the light switch.

Fig. 7

ADJUSTING THE DISCHARGE CHUTE AND CHUTE DEFLECTOR (See Figure 8)

• To adjust the discharge chute, rotate the handle (1) on the chute control rod in the direction

that you wish to direct the snow stream.

• To adjust the chute deector (and therefore the height of the snow stream), squeeze the

trigger (2) and raise or lower the chute deector.

OPERATING INSTRUCTIONS

Fig. 8

OPERATING TIPS

WARNING

If the Snow Thrower hits a foreign object while it is in use, the object could be thrown in the

direction of the operator or a bystander. Thrown objects could cause serious personal injury.

Keep the area to be cleared free of all foreign objects that may be picked up and thrown by the

impeller.

• Keep the area of operation free of foreign objects that can become thrown by the impeller.

Perform a thorough inspection of the area since some objects may be hidden from view by

surrounding snow. lf the snow thrower hits an obstruction or picks up a foreign object during

use, stop the snow thrower, remove the battery, remove the obstruction, and inspect the unit

for damage. Repair or replace any damaged part before restarting and operating the unit.

• Keep children, pets, and bystanders away from the area of operation. Be aware that the

normal noise of the machine when turned on may make it difcult for you to hear approaching

people.

• When moving the snow thrower, use the wheels on one side as the pivot point. Slightly tilt the

snow thrower on this pivot point to move it forward or backward.

• Start your clearing path outward, throwing snow in a back and forth motion. To clear in the

opposite direction, pivot the snow thrower on its wheels. Make sure to overlap clearing paths.

• Note the wind direction. If possible, move in the same direction as the wind so that the snow

is not thrown against the wind (and thus back onto you and on the just cleared path).

• Do not push the snow thrower with excessive force. You should push the machine gently and

at a consistent speed in accordance with the unit's throw rate.

• Some parts of the snow thrower may freeze under extreme temperature conditions. Do not

attempt to operate the snow thrower with frozen parts. If the parts freeze while the snow

thrower is in use, stop the snow thrower, remove the battery, and inspect for frozen parts. Free

all parts before restarting or operating the snow thrower. Never force controls that are frozen.

• When working on pebbles, gravel, or unpaved surfaces, avoid throwing loose surface material

along with the snow by pushing down on the handle to raise the scraper at the base of the unit

above the pebbles or gravel.

OPERATING INSTRUCTIONS

MAINTENANCE

SERVICING

Servicing should be performed by a qualied technician. Replacement parts for this snow

thrower must be identical to the parts that they replace. If repairs are necessary, contact the

toll-free helpline, at 1-888-909-6757.

Note: Identify the left and right sides of the snow thrower when standing in the normal operating position.

WARNING

If the battery pack is installed into the snow thrower, the snow thrower could start accidentally

while the operator is performing maintenance on it, which could cause serious personal injury.

Remove the battery pack before performing any maintenance.

STORAGE

• Run the snow thrower for a few minutes in order to melt any snow that may be left on the snow

thrower.

• Wipe the snow thrower off with a dry cloth before storage. This will help prevent ice building

up on the unit and parts freezing.

• Remove the battery and store it in a cool dry location, if possible. Charge the battery every six

months when not in use in order to increase its life.

• Inspect the snow thrower thoroughly for worn, loose, or damaged parts. If any parts must be

repaired or replaced, contact the Toll-Free Helpline, at 1-888-909-6757.

• Store the snow thrower in a clean, dry place. Cover it in order to provide added protection.

MAINTENANCE

REPLACING THE SCRAPER (See Figure 9)

The scraper is located at the bottom of the impeller housing.

• Ensure that the battery is not installed in the tool.

• Remove the screw (1) from each side plate that holds the scraper and 3 screws (2) from under

the machine that secures the scraper to the machine.

• Remove and discard the old scraper.

• Install the new scraper, and fasten it securely with 5 screws that you previously removed.

Fig. 9

Page is loading ...

Greenworks GW80VSNW200 Owner's manual

Brand: Greenworks

Model: GW80VSNW200

Type: Owner's manual

This manual is also suitable for

2600402

Download PDF

report

Greenworks GW80VSNW200 Owner's manual

This manual is also suitable for

Greenworks GW80VSNW200 Owner's manual

Related papers

Other documents