Home Decorators Collection 1880000220 Operating instructions

Brand: Home Decorators Collection

Model: 1880000220

Type: Operating instructions

Bulb (not included)

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-384-9400, 9 a.m.-5 p.m., EST, Monday-Friday . Include

e-mail address if applicable .

Part

Description

Quantity

Socket adapter

Spindle bracket

Canopy

Compression nut

Socket ring

Style and finish will vary by item.

Lamp cup

PACKAGE CONTENTS

Please read over the instructions, it will be a time-saver in the long run.

Assembly Instructions

HDC#: MFG#:

1880000220 PBN-6159-0030

Decorative overlay

Shade

Instant Pendant Light/Recessed Light Conversion Kit

1. Adjust excess cord by wrapping it around spindle bracket (B)

just below the socket adapter (A). Position the last wrap

so the cord will hang in the center of your recessed light

fixture.

ASSEMBL Y INSTRUCTIONS

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and diagram above. If any part is missing or damaged. Do not attempt to assemble the

product. Contact customer service for replacement parts.

Estimated Assembly Time: 10-15 minutes

Helpful Tools:

Recessed

light socket

2.Screw the adapter (A) into the light bulb socket in your

recessed light fixture.

3.After finger loosening the compression nut (D) by turning it

counter-clockwise, slide the canopy (C) up the cord and

against the ceiling.

PREPARATION

HELPFUL HINT: If the canopy does not sit tight against the

ceiling, loosen the compression nut (D). GENTLY pull down on

the cord to flex the spring arm (B), then slide the canopy (C),

back up and re-tighten.

4.To hold the canopy in place against the ceiling, finger tighten

the compression nut (D) by turning it clockwise.

Ceiling

CAUTION: Do not over-tighten the compression nut (D).

Fig.1

Fig.2

Ceiling

Recessed

light fixture

Fig.3

Fig.4

5.Gently slide decorative overlay (H) over drum shade (F)

Bulb (not included)

Fig.6

Fig.5

6.Attach both to the lamp cup (G) and screw on the socket ring (E)

clockwise until tight.

Shut off light and let bulb and glass shade cool if necessary. Wipe glass shade with soft cloth or household

glass cleaner. Do not use abrasive cleaners. For replacement bulbs, use watt maximum, T ype A or

suitable medium base bulb (not included) including CFL bulbs.

CARE AND MAINTENANCE

WARRANTY

Bulb is burned out

Power is off

Bad switch

Replace light bulb (not included)

Make sure power supply is on

Test or replace switch

Bulb will not light

Loosen the compression nut (D) and GENTLY

pull down on the cord to flex the spring arm (B),

then slide the canopy (C) back up and re-tighten

Canopy does not fit tight

against the ceiling

Cord has stretched out

Problem

Possible Cause Corrective Action

TROUBLESHOOTING

Printed in China

WARNINGS AND CAUTIONS

WARNING

Risk of fire or electrical shock. Do not alter, relocate, or remove wiring, lampholders, ballasts, or any other

electrical component.

Risk of fire or electrical shock. Install this kit only in the luminaries that have the construction features and

dimensions shown in the photographs and/or drawings.

CAUTION

Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

The manufactur er warra nts again st defec ts in mater ials and workmanship for one (1) year from the date of purch ase to

the origin al purch aser. If withi n this perio d the product is found to be defec tive , tak e a copy of the bill of sale as a proof

of purch ase and the product in its origin al packa ging to the place of purchase. This warra nty does not cov er products

becom ing damaged or defec tive cause d by abuse , misuse,ac cidents, fault y instal lation, improp er handling and/o r

maint enance, or repairs not carrie d out by the manufactur er. Items which are not covere d by warra nty are those

consid ered as parts which are prone to failur e due to general wear and tear (for example, lamps, fuses , glass mater ials ).

There will be no obliga tions or liabili ty on the part of the manufactur er for con sequenti al damages arisin g from the use

of the product or any indire ct damages with respe ct to loss of property,revenue, or costs for removal. Insta llat ion or

the use of the product or any indire ct damages with respe ct to loss of property, rev enue, or costs for removal,

re-ins tallation. As some states do not allo w exclu sions of limitatio ns on an implie d warra nty, the above exclu sion and

limita tion may not apply. This warra nty gives you speci fic rights and you may also have other rights which may vary

from state to state.

www. WorthHP.com

U.S. Patent No. 7 ,311,425

100

Home Decorators Collection 1880000220 Operating instructions

Home Decorators Collection 1880000220 Operating instructions

Home Decorators Collection 1880000220 Operating instructions

Related papers

Other documents