Reliance Controls THP218 Operating instructions

Type
Operating instructions
THP218 LiteSmart Installation and Operation
Battery Installation:
1. Remove battery cover by sliding open
2. Install 3 new AA batteries according to the orientation diagram inside the battery
compartment
3. Replace battery cover
Operation:
1. For constant light, slide switch to “ON” position
2. For light only when it is needed, slide switch to “AUTO”. The light will now be activated
only when ambient light is low and there is motion nearby
3. Slide switch to “OFF” for storage
  • Page 1 1

Reliance Controls THP218 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI