SEAV LG 2183 GB User guide

Type
User guide
1 Rev. 1.1 03/07
N
EW
A
NEMOMETER
Wind speed sensor to be used in conjunction with SEAV electronic control units for sun blinds.
T
ECHNICAL DATA
- Contact capacity: 200 mA 100VDC
- Contact closing (pulse): Once x revolution
- Connection cable: outdoor use 2 x 2.5 mm2
- Connection cable length: (AWG 12-26) 4 m Max.
- Working temperature: -10÷60°C
- Packaging dimensions 240x185x110 mm
- Container PC UL94V-0 (IP54)
E
XPLODED
D
IAGRAM OF
M
ECHANICAL
P
ARTS
:
C
ONNECTION
C
ABLE
I
NSTALLATION
:
GB
2 Rev. 1.1 03/07
H
ORIZONTAL
A
NEMOMETER
I
NSTALLATION
:
V
ERTICAL
A
NEMOMETER
I
NSTALLATION
:
F
OR THE
I
NSTALLER
-
IMPORTANT
- The fixing of the connection cable must be secured using the cable clamp supplied
with the product.
- At the time of installation, the anemometer must be handled with care, making sure you have assembled
its components correctly.
- It is very important that you decide on the exact position of the device so that it is affected by the wind in the same way
as the sun blind.
- All operations requiring the opening of the casing (such as installation, programming and repair, etc.) must
be carried out by skilled staff only.
  • Page 1 1
  • Page 2 2

SEAV LG 2183 GB User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI