92503018870REVA
M199 TAP TEMPO SWITCH
CONTROLS
FOOTSWITCH sets delay tempo
DIRECTIONS
• Run an instrument cable from
your pedal’s external switch
jack to the M199’s INPUT jack.
• The EP103 Echoplex
®
Delay only requires a normal
instrument cable when connected
to the M199, but other pedals
may require a different type,
such as a TRS cable. Consult
your pedal’s manual to be sure.
• Tap your foot on the
FOOTSWITCH to your
desired tempo.
INTERNAL SWITCHES
The M199 is factory-set to work
with the Echoplex Delay. Check
your pedal’s user manual to see
its tip/ring cable requirements.
To adjust the M199’s tip/ring
setup, remove bottom plate to
access internal switches. See
Diagram A for switch
congurations.
M199 TAP TEMPO SWITCH
DESCRIPTION
• Adjustable tip/ring conguration
• Ruggedly built, road-ready
construction
• Can be used with a variety
of pedal types
POWER
The MXR Tap Tempo Switch
requires no battery or
power supply.
1
1
SWITCH 1 UP
Tip to Ground
Ring to Ground
SWITCH 2 UP
Tip & Ring to Ground
SWITCH 3 UP
DIAGRAM A
Factory setting is SWITCH 1 UP for use with Echoplex Delay.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Takagi Mobius T-M199 Owner's manual
-
DigiTech RP360 XP User manual
-
-
-
Century FW3200 Owner's manual
-
Catalinbread RAH User manual
-
-
TC Electronic D-TWO Owner's manual
-
Fender Mustang™ GTX 50/100 Owner's manual
-
