Parts Included
A. Sliding Basket Assembly
B. (4) Mounting Screws
Tools Required
• PhillipsHeadScrewdriver
• Drillwith1/16˝(1.5mm)bitfor
drillingpilotholes
• Pencil
Product Assemblies
MUB-11-R-FN
MUB-14-R-FN
MUB17-FN
Withapencilmakeamark1-1/4"backfromthefrontoutsideedgeofthecabinet.
Placetheslidingbasketassemblywiththefrontedgeofthefrontmountingstrap
directlybehindthisline.Withapencilmarkthecabinetfloorthroughthefronttwo
mountingholelocations.Removethebasketfromthecabinet.With1/16"drillbitdrill
pilotholesthroughthetwomountingholelocationsyoumarked.
Pullthemulti-usebasketcompletelyforward.Placetheentireassemblybackinsideof
thecabinetsothatthefrontmountingholeslinedirectlyoverthepilotholesyoudrilled
inthecabinetfloor.Fastenthefrontmountingstraptothecabinetfloorusingtwo
mounting screws.
Nowthatthefrontmountingstrapismountedtothecabinetfloordrillpilotholes
inthroughtherearmountingholelocationswiththe1/16"drillbit.Fastentherear
mountingstraptothecabinetfloorusingtwomountingscrews.Pushthemulti-use
basketallthewaybackintothecabinet.Installationisnowcomplete.
Multi-Use Baskets
Installation Instructions
310243_C_0413
Inspect all parts and read all instructions prior to
beginning assembly and installation.
2
1
2700 Oak Industrial Drive NE, Grand Rapids, MI 49505 USA
800.253.1561 • 616.459.3311 • www.kv.com
©2013 Knape & Vogt. All rights reserved.
Knape & Vogt
®
reserves the right to change specications without notice. Made in China.
A
B
3
2
1-1/4"
(3.2 cm)
1
3