3 3/4"
[95mm]
1 7/16"
[37mm]
Furnished w/
Spanner Bit for
Vandal Resistant
Screw.
Note: Rough-In Requirement
1 1/8" [ 29mm] Holes
Vandal Resistant Screw.
Loosen Screw (Do Not Remove)
and Pull Off Push Button Asm to
Access Metering Adjustment.
(Metering Adjustment Requires
3/32" Hex Key)
Mounting
Surface
3 3/8"
[86mm]
4"
[102mm]
5 7/8"
[149mm]
2
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
Travelers Rest, SC 29690
REG. #A2601
ISO #9001
06/30/08
DHL
B-0831
of
Button Metering Cartridges & 2.2 GPM Aerator
2 Saddleback Cove / P.O. Box 1088
Date:
Travelers Rest, SC: 800-476-4103
Simi Valley, CA: 800-423-0150
Fax: 864-834-3518
www.tsbrass.com
JHB
KJG
Approved
Drawn
1:2
4" Centerset Metering & Mixing Faucet w/ Push
1
Sheet:
Checked
This Space for Architect/Engineer Approval
Job Name__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
Male Aerator
2.2 GPM
w/ Hot & Cold Handles and
B-0199-03
Male Shanks
1/2" NPSM
Coupling Nuts
1/2" NPSM
Vandal Resistant Screws
238AH (Hot Side)
238AC (Cold Side)
Push Button
Metering Cartridges
Fits Decks up to
1 3/8" [35mm] Thick
1 7/8"
[48mm]