Handy Home Products 19585-3 Installation guide

Type
Installation guide
1
Gazebo Flower Box
10’, 12’ and 14’ Models
Parts List
-BEFORE YOU BEGIN-
First...
Read these instructions thoroughly before you begin
assembly.
Check all parts
Compare the parts you have to the list, If a part is missing,
circle the part in question and call our toll-free # at
(800)
437-0784
.
Tools Required
Phillips Screwdriver
1-24-03
#16688
Optional Tools
Electric Drill with #2 phillips Tip
Drill Bit for Pre-drilling and Drainage Holes
Always wear OSHA-APPROVED safety
glasses throughout the assembly process
Staining...
This Flower Box is constructed of a long-lasting
western cedar. Untreated cedar exposed to sunlight will
eventually weather to a silver-grey color. Applying Stain
or Sealers per manufacturers instructions WITHIN 30
DAYS will improve the water resistance of your Flower
Box. Some sanding to remove rough edges and natural
wood stains may be required prior to staining.
PARTS LIST
1 Assembled Flower Box
1 Plastic Insert
Qty. Description
Hardware
- (4) #8 2-1/2” Screws
1-A
Install the Flower Box to the outside of your Gazebo or desired location below the sill as shown. Install (4) 2-1/2”
screws from the inside equally spaced. Insert Plastic Tray.
Note: You may prefer to drill small
drainage holes in tray bottom.
1-A:
Plastic Tray
2-1/2"
Screw
Inside
Flower
Box
Fig. 2
Fig.1
  • Page 1 1

Handy Home Products 19585-3 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI