Mustang W676 User guide

I have reviewed the user manual for the Mustang W676 notebook. It contains instructions on battery removal and insertion, as well as a warning about removing the bottom cover. I'm ready to answer your questions about this device.
What should I do if I need to replace the hard disk or RAM?

What is the first step to remove the battery?

What is the first step to insert the battery?

Power Management

3 - 24 Removing the Battery

Removing the Battery

We recommend that you do not remove the battery yourself. If you do need to re-

move the battery for any reason (e.g. long term storage) see below.

1. Turn the computer off, and turn it over.

2. Slide the latch in the direction of the arrow.

3. Slide the latch in the direction of the arrow, and hold it in place.

4. Lift the battery out in the direction of the arrow from point .



Bottom Cover

Removal Warning

Do not remove any cov-

er(s) and /or screw(s) for

the purposes of device

upgrade as this may vio-

late the terms of your

warranty.

If you need to replace/

remove the hard disk/

RAM/optical device etc.,

for any reason, please

contact your distributor/

supplier for further infor-

mation.

Figure 3 - 16

Battery Removal

Mustang W676 Notebook

Power Management

Inserting the Battery 3 - 25

Inserting the Battery

1. Turn the computer off, and turn it over.

2. Slide the battery into the compartment in the direction of the arrow .

3. Slide the latches (latch should lock automatically) and in the direction of

the arrows to lock the battery.

Figure 3 - 17

Battery Insertion

12 3

Mustang W676 Notebook