Items Included
Camera, transformer, bracket, antenna, screw kit, instruction manual
Step 1: Camera Installation
A. Attach antenna to the back of the camera and turn clockwise
B. Plug cable into an electric outlet. Voltage range: 100V-250V AC
Step 2: Download the Smartgate App
For apple phones, search Smartgate on Apple Store, and then download
For Android phones, search Smartgate on Google Play, and then download
Step 3: Create an Account with the Smartgate App
1. Click register on the login screen
2. Enter email or phone number and password then click “get verification code”
3. Enter verification code that was sent to the email address or phone number
4. Click register to complete the registration process
5. Log in using the account you just created
Step 4: Connect the Camera to the Smartgate App
Connect using WIFI
1.Use a pen to press the reset button on the back side of the camera transformer for 8 seconds.
Reset
2. Go to Settings on your phone, turn on Wi-Fi, and in the wifi section, search
and connect with the wifi name “SmartDoor”.
3. Open the Smartgate APP and click the plus button on the right upper corner
4. It will connect automatically and take you to
the wireless network settings page
5. Enter your camera name, or choose “My Door”
as default
6. Enter WIFI name and WIFI password then press
binding device.
7. You should see a "binding success" popup
message if your wifi name and password was
entered correctly. Press the "OK" button.
8. Press the back button the top left to return
home.
Binding Device
•If you are having trouble connecting the Smartgate app to the camera, check to make sure your
firewall or router is not blocking the connection. Certain routers have built-in security features
that you may need to configure to allow the camera to connect.
•This camera is not compatible with 5Ghz routers.
• Make sure bluetooth and wifi (local network) are granted permission on the Smartgate App
9. Your camera will appear. To prevent a mismatch, wait a few seconds until the status message says
"Connected". Once connected, tap on the picture of the house to view the camera.
Connect using an Ethernet Cable Instead of WIfi
Follow the same WIFI procedures above for an ethernet connection.
Troubleshooting Connection Issues
Step 5: Connect your Camera to your Calimet Gate Opener
2.In the smartgate APP, click on the camera to open the live video
On your gate opener circuit board, look for and press the study button for about 2 seconds
until the flashing light becomes solid and then stop pressing it.
3.
Open the black cover of your gate opener, look for the circuit board.
4.Press the open button on the Smartgate app multiple times (and fast), until the gate is
moving.
Note: The study light on the circuit board should be a solid color (not flashing) while
you're pressing the open button. If not, repeat step 3.
5.Connection complete.
1.
OPEN
Gate
Smartgate App Control Panel
Live video feed
Switch Gates
Open/Close Gate Button
•One Camera can control up to 8 gates
•Camera can be used as an access control (418 Mhz)
Gate
Add Gate
Delete Gate
Screenshot
Record Video
Home
180 degree rotation
N/A
N/A
Rewind
Files
Settings
Connected
Gate 1
Adding Multiple Users
1. Open the menu on the upper left corner, then press “My Circle”.
2. Press “Add” on upper right corner, enter other user's account information.
3. Other user’s account appears when complete.
4. Go back to the home screen and choose the camera that you would like to share, then click
settings.
5. Click on the gray circle next to the user's account that you would like to give access to.
The blue check mark means account now has access.
•The account that is being added can open/close gate and view live video, but is not
authorized to share the video with others.
•Click the blue check button to disable the sharing option.
View Past Video Footage
1.1. Go to the Home Screen
2.2. Press the Rewind Button
3.3. Select time frame, the selected button becomes blue
4.4. Press Start button (delay may occur based on your wifi speed)
5.5. The camera comes with 32gb memory card. It can be upgraded to a 64gb memory card.
Delete the Camera
1.1. Go to home screen and click on the settings icon
2.2. Press the "Remove Device" Button
Smartgate App Troubleshooting Instructions
If the camera and app were working fine before, but is now experiencing problems,
follow the instructions below:
1. Sign out – sign out of the app and sign back in
2. Force close the app – On the Iphone home screen, swipe from the bottom left to the
top, and locate the smartgate app, and swipe up to force close the app. In android
phones, go to setting apps locate the smartgate app force stop. After force
closing, re-open the app and see if the problems resolve.
3. Check that Wifi and Bluetooth are turned on – In your settings, check that wifi and
Bluetooth are turned on, and airplane mode is turned OFF.
4. Update to the latest version – Go to the app store or google play store and update
the Smartgate app to the latest version if you haven’t already.
Alternatively, you can visit the links below to update:
a. Iphone: https://apps.apple.com/us/app/smart-gate/id1440418448
b. Android: https://play.google.com/store/apps/details?id=www.calimet.com.calimet
5. Delete the camera - Delete the camera from the smartgate app and then re-add.
Cameras can be deleted by pressing the gear icon in the home screen, and then press
the Remove Device button. Follow the instructions starting from STEP 4 to re-add the
camera to the Smartgate app.
/
