2. Fisher & Paykel
  3. DD60SCW9 Single DishDrawer Dishwasher

Fisher & Paykel DD60SCW9 Single DishDrawer Dishwasher User guide

  • Hello! I've reviewed the datasheet for the Fisher&Paykel DishDrawer models DD60SCW9 and DD60SCHW9. This document provides precise measurements and clearance details for installation, including overall dimensions, chassis depth, and cavity requirements. I'm ready to assist with any questions you have regarding this product's technical specifications.
  • What is the overall height of the DishDrawer?
    What is the overall width of the DishDrawer?
    What is the minimum depth of the cavity required?
    What is the minimum height of the cavity?
    What is the minimum width of the cavity?
DATA SHEET 600MM SINGLE DISHDRAWER™
Model no:
DD60SCW9, DD60SCHW9
Dimensions
mm
a Overall height of DishDrawer™
410
B Overall width of DishDrawer™
599
c Overall depth of DishDrawer™
573
D Depth of chassis
553
e Depth of front panel
20
f Height of front panel
393
g Height from top of door to top of chassis
8
h Height of ventilation gap below front panel
7
i Maximum extension of drawer from front datum
547
Minimum Clearances
mm
Height of cavity
min 412
Width of cavity
600
Depth of cavity
min 560
Minimum clearance from a corner cupboard
13
Note: Service outlet at rear extends both sides, hoses and cords can be routed
to either or both.
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 07.09.2016
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(1/16''). Please read the installation manual for detailed information on
installing the product. For full installation instructions & specifications visit
www.fisherpaykel.com
599
B
573
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
d
f
e
i
h
c
0 100 200 400
millimetres
410
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
e
g
553
DATUM : BOTTOM OF PRODUCT
CLEARANCE :
CORNER CUPBOARD
CLEARANCE :
CORNER CUPBOARD
/