Klein Tools N95 respirator helps protect against certain airborne particles like those encountered while grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances. It is not meant to be used against vapors, oil-based aerosols, asbestos, and sandblasting or in atmospheres immediately dangerous to life or health. For safe use, inspect before and after each use to ensure it's in good working condition. Do not use for more than 8 hours at a time.
Klein Tools N95 respirator helps protect against certain airborne particles like those encountered while grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances. It is not meant to be used against vapors, oil-based aerosols, asbestos, and sandblasting or in atmospheres immediately dangerous to life or health. For safe use, inspect before and after each use to ensure it's in good working condition. Do not use for more than 8 hours at a time.
N95 PARTICULATE DISPOSABLE
RESPIRATOR INSTRUCTIONS
60440
ENGLISH
FIG. 1
FIG. 3
FIG. 2
FIG. 4
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL SPECIFICATIONS
STANDARDS
The Klein Tools 60440 N95 Particulate Disposable Respirator is approved as a Particulate Filtering Facepiece Respirator in accordance with
NIOSH Standards 42 CFR Part 84.
The Klein Tools 60440 N95 Particulate Disposable Respirator is approved as a Particulate Filtering Facepiece Respirator in accordance with
NIOSH Standards 42 CFR Part 84.
The Klein Tools 60440 N95 Particulate Disposable Respirator is approved as a Particulate Filtering Facepiece Respirator in accordance with
APPLICATIONS
This respirator helps protect against certain particulate contaminates but does not eliminate exposure or the risk of contracting disease or
infection. It is approved for protection against particulate aerosols free of oils. Klein Tools recommends this respirator for use against particles
This respirator helps protect against certain particulate contaminates but does not eliminate exposure or the risk of contracting disease or
infection. It is approved for protection against particulate aerosols free of oils. Klein Tools recommends this respirator for use against particles
This respirator helps protect against certain particulate contaminates but does not eliminate exposure or the risk of contracting disease or
that become airborne during activities such as grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances.
infection. It is approved for protection against particulate aerosols free of oils. Klein Tools recommends this respirator for use against particles
that become airborne during activities such as grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances.
infection. It is approved for protection against particulate aerosols free of oils. Klein Tools recommends this respirator for use against particles
The protection provided by classification N95 also covers the protection provided by lower class respirators. Guidelines for the selection and use
that become airborne during activities such as grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances.
The protection provided by classification N95 also covers the protection provided by lower class respirators. Guidelines for the selection and use
that become airborne during activities such as grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances.
may vary between countries; always check prior to use to ensure that your selection for the intended application meets national requirements.
The protection provided by classification N95 also covers the protection provided by lower class respirators. Guidelines for the selection and use
may vary between countries; always check prior to use to ensure that your selection for the intended application meets national requirements.
The protection provided by classification N95 also covers the protection provided by lower class respirators. Guidelines for the selection and use
WARNINGS
To ensure safe operations, follow these instructions. Failure to observe these warnings and instructions may result in sickness or death.
•
DO NOT
use against vapors, paint spray, oil-based aerosols, asbestos and sandblasting.
•
DO NOT
use against any contaminant whose concentration is unknown, or immediately dangerous to life
use against vapors, paint spray, oil-based aerosols, asbestos and sandblasting.
use against any contaminant whose concentration is unknown, or immediately dangerous to life
use against vapors, paint spray, oil-based aerosols, asbestos and sandblasting.
•
DO NOT
use against concentrations of dust and mists which exceed the maximum use concentration, or 10 times contaminant’s
use against any contaminant whose concentration is unknown, or immediately dangerous to life
use against concentrations of dust and mists which exceed the maximum use concentration, or 10 times contaminant’s
use against any contaminant whose concentration is unknown, or immediately dangerous to life
permissible exposure limit established by OSHA.
use against concentrations of dust and mists which exceed the maximum use concentration, or 10 times contaminant’s
permissible exposure limit established by OSHA.
use against concentrations of dust and mists which exceed the maximum use concentration, or 10 times contaminant’s
•
These respirators do not supply oxygen. Use only in well ventilated areas containing sufficient oxygen to support life.
permissible exposure limit established by OSHA.
These respirators do not supply oxygen. Use only in well ventilated areas containing sufficient oxygen to support life.
permissible exposure limit established by OSHA.
Leave the contaminated area immediately if:
•
Dizziness or distress is experienced.
•
You taste or smell contaminants, or irritation occurs.
Dizziness or distress is experienced.
You taste or smell contaminants, or irritation occurs.
Dizziness or distress is experienced.
•
Breathing becomes difficult.
You taste or smell contaminants, or irritation occurs.
Breathing becomes difficult.
You taste or smell contaminants, or irritation occurs.
•
A defect is discovered in the respirator.
Breathing becomes difficult.
A defect is discovered in the respirator.
Breathing becomes difficult.
•
DO NOT
alter or modify the respirator.
•
NOT
suitable for persons with beard or other facial hair which may reduce the efficacy of respirator.
alter or modify the respirator.
suitable for persons with beard or other facial hair which may reduce the efficacy of respirator.
alter or modify the respirator.
•
The use and reuse of this respirator is subject to consideration of hygiene damage and increased breathing resistance. Service time
suitable for persons with beard or other facial hair which may reduce the efficacy of respirator.
The use and reuse of this respirator is subject to consideration of hygiene damage and increased breathing resistance. Service time
suitable for persons with beard or other facial hair which may reduce the efficacy of respirator.
should not be extended beyond 8 total hours of use.
The use and reuse of this respirator is subject to consideration of hygiene damage and increased breathing resistance. Service time
should not be extended beyond 8 total hours of use.
The use and reuse of this respirator is subject to consideration of hygiene damage and increased breathing resistance. Service time
•
The use of this respirator presupposes exact knowledge of the instructions for use, applicable health and safety standards, guidelines for
should not be extended beyond 8 total hours of use.
The use of this respirator presupposes exact knowledge of the instructions for use, applicable health and safety standards, guidelines for
should not be extended beyond 8 total hours of use.
selection and use, and appropriate training in matters of personal respiratory protection.
The use of this respirator presupposes exact knowledge of the instructions for use, applicable health and safety standards, guidelines for
selection and use, and appropriate training in matters of personal respiratory protection.
The use of this respirator presupposes exact knowledge of the instructions for use, applicable health and safety standards, guidelines for
FITTING (FIG. 1, 2, 3, 4)
The respirator must be inspected by the wearer before and after each use to ensure that it is in good working condition and valves are
seated correctly.
The respirator must be inspected by the wearer before and after each use to ensure that it is in good working condition and valves are
seated correctly.
The respirator must be inspected by the wearer before and after each use to ensure that it is in good working condition and valves are
NOTE: Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the
local government requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which includes medical
NOTE: Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the
local government requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which includes medical
NOTE: Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the
evaluation, training, and t testing.
local government requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which includes medical
evaluation, training, and t testing.
local government requirements. In the United States, employers must comply with OSHA 29 CFR 1910.134 which includes medical
STEP 1 (FIG. 1):
Hold the respirator in one hand with the nose area at your fingertips, allowing the headbands to hang below your hand.
STEP 2 (FIG. 2):
Press the respirator against your face with the nose foam on the bridge of your nose.
STEP 3 (FIG. 3):
Place the top headband high on the back of your head. Move the bottom band over your head and position it below your ears.
STEP 4 (FIG. 4):
Test the fit. Cup both hands over the respirator and inhale vigorously. If no negative pressure is felt inside the respirator,
readjust the position of the respirator according to Steps 2, 3 and 4 until a better fit is achieved.
STEP 4 (FIG. 4):
readjust the position of the respirator according to Steps 2, 3 and 4 until a better fit is achieved.
STEP 4 (FIG. 4):
Test the fit. Cup both hands over the respirator and inhale vigorously. If no negative pressure is felt inside the respirator,
readjust the position of the respirator according to Steps 2, 3 and 4 until a better fit is achieved.
Test the fit. Cup both hands over the respirator and inhale vigorously. If no negative pressure is felt inside the respirator,
If you CANNOT achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.
STORAGE
Store the respirators in cool dry atmosphere at a temperature of between -20°C and 40°C. Avoid direct exposure of sunlight during storage as the filter media
in this respirator can be degraded by extended exposure to direct sunlight. Storage under conditions other than those specified may affect shelf life.
Store the respirators in cool dry atmosphere at a temperature of between -20°C and 40°C. Avoid direct exposure of sunlight during storage as the filter media
in this respirator can be degraded by extended exposure to direct sunlight. Storage under conditions other than those specified may affect shelf life.
Store the respirators in cool dry atmosphere at a temperature of between -20°C and 40°C. Avoid direct exposure of sunlight during storage as the filter media
Read
instructions
before using
104°F
(40°C)
-4°F
(-20°C)
Temperature
range of storage
conditions
Year/Month
Expiration date
<75%
<75%
R.H.
Humidity range
of storage
conditions
S – SPECIAL OR CRITICAL USER INSTRUCTIONS
The model 60440 filter facepiece respirator has been manufactured by JINFUYU INDUSTRIAL CO, LTD. for Klein Tools under TC-84A-7720.
BASED ON: 1390508 Rev 10/22 A
THIS RESPIRATOR IS ONLY APPROVED IN THE FOLLOWING CONFIGURATIONS:
RESPIRATOR COMPONENTS
TC- PROTECTION1RESPIRATOR CAUTIONS AND LIMITATIONS2
60440
84A-7720 N95 X ABCJMNOPS
1. PROTECTION:
N95 - Particulate Filter (95% filter efficiency level) effective against particulate aerosols free of oil; time use restrictions may apply.
2. CAUTIONS AND LIMITATIONS:
A - Not for use in atmospheres containing less than 19.5 percent oxygen.
B - Not for use in atmospheres immediately dangerous to life or health.
C - Do not exceed maximum use concentrations established by regulatory standards.
J - Failure to properly use and maintain this product could result in injury or death.
M - All approved respirators shall be selected, fitted, used, and maintained in accordance with MSHA, OSHA, and other applicable regulations.
N - Never substitute, modify, add, or omit parts. Use only exact replacement parts in the configuration as specified by the manufacturer.
O - Refer to User Instructions, and/or maintenance manuals for information on use and maintenance of theserespirators.
P - NIOSH does not evaluate respirators for use as surgical masks.
S - Special or critical User Instructions and/or specific use limitations apply. Refer to User Instructions before donning.
www.calcert.com [email protected]1.888.610.7664 0
5
10
15
20
25
30
-
1
Klein Tools N95 respirator helps protect against certain airborne particles like those encountered while grinding, sanding, or processing wood, minerals, flour, iron, coal, and certain other substances. It is not meant to be used against vapors, oil-based aerosols, asbestos, and sandblasting or in atmospheres immediately dangerous to life or health. For safe use, inspect before and after each use to ensure it's in good working condition. Do not use for more than 8 hours at a time.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
BUX converting N95 User manual
-
3M Half Facepiece Disposable Respirator Assembly 5103, Organic Vapor/Acid Gas, Small 12 EA/Case Operating instructions
-
ERB Safety 7185 User manual
-
Milwaukee 48-73-4014 User guide
-
-
3M N95 User manual
-
-
-
-
3M Disposable Respirators DL DPR Operating instructions