DATA SHEET
Built-under Dishwasher, Recessed Handle, 60cm
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 22.02.2022
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm.
Please read the installation guide for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
DW60UNT4X2, DW60UNT4B2, DW60UZT4B2
Product Dimensions
a Overall height of product*
B Overall width of product
c Overall depth of product
D Height of chassis
e Depth of chassis
f Height of feet*
G Height of toe kick panel
• Custom panel
• Pre-finished panel
h Width of toe kick panel
• Custom panel**
• Pre-finished panel
I Depth of toe kick panel
• Custom panel***
• Pre-finished panel
j Depth of toe kick recess
k Depth of inner door
L Depth of outer door
m Height from top of chassis to bottom of inner door
n Height from bottom of inner door to floor*
oDepth of door opening
p Door panel height
q Handle height
r Height from handle grip to top of the chassis
*depending on adjustment of levelling feet
** Continuous toe kick installations are possible
***if using supplied toe kick mounting screws
Minimum Clearances
Minimum inside width of cavity
Minimum overall depth of cavity**
Minimum inside height of cavity*
Recommended height of adjacent cabinetry
Height of toe kick area
Minimum clearance to adjacent cupboard door
Minimum clearance to corner cupboard
*depending on adjustment of levelling feet
**including 19mm door panels on adjacent cabinetry
Ap
r
M
C
F
n
B
D
g
o
q
l
Ke
h
i
J
PROFILE VIEW
FRONT VIEW
PLAN VIEW
857-917
597
574
DATUM: TOP OF CHASSIS
DATUM: INNER DOOR
DATUM: INNER DOOR
CLEARANCE :
CORNER CUPBOARD
CLEARANCE :
CORNER CUPBOARD