2. Fisher & Paykel
  3. DW60UNT4B2 Built-Under Dishwasher

Fisher & Paykel DW60UNT4B2 Built-Under Dishwasher, DW60UNT4B2 Built-Under Dishwasher Tall Sanitise, DW60UZT4B2 User guide

  • Hello! I've reviewed the datasheet for the Fisher & Paykel DW60UNT4X2, DW60UNT4B2, and DW60UZT4B2 built-under dishwashers. This document provides crucial measurements and clearances for installation, including dimensions for the appliance, toe kick panel, and required cabinet spaces. I am ready to answer any questions you might have about the product's specifications or installation.
  • What is the overall height range of the product?
    What is the minimum overall depth of the cavity required?
    What is the minimum clearance to an adjacent cupboard door?
DATA SHEET
Built-under Dishwasher, Recessed Handle, 60cm
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 22.02.2022
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm.
Please read the installation guide for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
DW60UNT4X2, DW60UNT4B2, DW60UZT4B2
Product Dimensions
mm
a Overall height of product*
857 - 917
B Overall width of product
597
c Overall depth of product
574
D Height of chassis
857
e Depth of chassis
521
f Height of feet*
0 - 60
G Height of toe kick panel
• Custom panel
• Pre-finished panel
115 - 175
127
h Width of toe kick panel
• Custom panel**
• Pre-finished panel
min. 596
596
I Depth of toe kick panel
• Custom panel***
• Pre-finished panel
min. 16
16
j Depth of toe kick recess
120
k Depth of inner door
33
L Depth of outer door
20
m Height from top of chassis to bottom of inner door
720
n Height from bottom of inner door to floor*
138 - 198
oDepth of door opening
656
p Door panel height
669
q Handle height
48
r Height from handle grip to top of the chassis
34
*depending on adjustment of levelling feet
** Continuous toe kick installations are possible
***if using supplied toe kick mounting screws
Minimum Clearances
mm
Minimum inside width of cavity
600
Minimum overall depth of cavity**
580
Minimum inside height of cavity*
857
Recommended height of adjacent cabinetry
713 - 794
Height of toe kick area
65 - 200
Minimum clearance to adjacent cupboard door
2
Minimum clearance to corner cupboard
13
*depending on adjustment of levelling feet
**including 19mm door panels on adjacent cabinetry
Ap
r
M
C
F
n
B
D
g
o
q
l
Ke
h
i
J
PROFILE VIEW
FRONT VIEW
PLAN VIEW
857-917
597
574
DATUM: TOP OF CHASSIS
DATUM: INNER DOOR
DATUM: INNER DOOR
CLEARANCE :
CORNER CUPBOARD
CLEARANCE :
CORNER CUPBOARD
/