Harley Benton 372334 User guide

Brand: Harley Benton

Model: 372334

Category: Guitar accessories

Type: User guide

Harley Benton 372334

The Harley Benton 372334 is a chromatic floor tuner with an external power adapter that can supply up to eight further 9-V devices. It is suitable for guitar and bass and has a tuning range of 12 Hz to 4186 Hz with an accuracy of ± 1 cent. The large LED / LC display provides excellent readability.

The 372334 has a True Bypass Pedal switch that allows you to feed the unchanged input signal to an amplifier or another effects pedal. Pressing the pedal switch mutes the output for tuning.

Harley Benton 372334

The 372334 has a True Bypass Pedal switch that allows you to feed the unchanged input signal to an amplifier or another effects pedal. Pressing the pedal switch mutes the output for tuning.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 372334_10.08.2022

PowerPlant Tuner

Quick Start Guide

This quick start guide contains important information on the safe operation of the

product. Read and follow the safety advice and instructions given. Retain the quick

start guide for future reference. If you pass the product on to others please include

this quick start guide.

Safety instructions

Intended use

This device is intended to be used for sound processing of signals from musical instruments

with electromagnetic pickups. Any other use or use under other operating conditions is con-

sidered to be improper and may result in personal injury or property damage. No liability will

be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard! Ensure that chil-

dren do not detach any small parts from the product. They could swallow the

pieces and choke! Never let children unattended use electrical devices.

External power supply

The device is powered by an external power supply. Before connecting the ex-

ternal power supply, ensure that the input voltage (AC outlet) matches the volt-

age rating of the device and that the AC outlet is protected by a residual current

circuit breaker. Failure to do so could result in damage to the device and possi-

bly the user. Unplug the external power supply before electrical storms occur

and when the device is unused for long periods of time to reduce the risk of

electric shock or re.

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your surface and after some time cause permanent dark

stains. In case of doubt, do not put the rubber feet directly on the surface and

use a suitable underlay if necessary, i.e. felt pads or similar.

Fire hazard due to exceedance of the maximum current

The device can power other devices of identical construction. The current con-

sumption of all other devices connected in series must not exceed the values

indicated in the technical specications. Otherwise you risk injuries and irrepa-

rable damages to the device. Only connect so many identical devices that the

maximum current consumption is not exceeded. Ensure the sucient dimen-

sioning (wire cross section) of the power cables used for all devices connected

in series.

Where to use the product

Never use the product

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• at locations where the unit can become wet

General handling

• To prevent damage, never use force when handling the product.

• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid

cleaners such as benzene, thinners or ammable cleaning agents.

Features

• Chromatic oor tuner with external power adapter to supply up to eight further

9-V devices

• Suitable for guitar and bass

• 12 Hz … 4186 Hz

• Accuracy ± 1 cent

• Excellent readability due to large LED / LC display

• Power supply via stabilized DC power adapter (100 … 240 V AC), included

• Supply of connected devices via included DC cables

• Outputs: 6 × 9 V DC, each loadable with 100 mA

2 × 9 V DC, each loadable with 500 mA

For the transport and protective packaging, environmentally friendly materials have been

chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are

properly disposed of. Do not just dispose of these materials with your normal household

waste, but make sure that they are collected for recycling. Please follow the notes and mark-

ings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive

(WEEE) in its currently valid version. Do not dispose of your old device with your normal house-

hold waste. Dispose of this product through an approved waste disposal rm or through your

local waste facility. Comply with the rules and regulations that apply in your country. If in doubt,

consult your local waste disposal facility.

A detailed user manual is available to download on the product website on our homepage www.thomann.de.

Connections and operating elements

1 9V Input socket for an external DC 9 V power supply

2 IN 1/4" input jack socket for standard instrument cable

3 OUT Use this 1/4" output jack socket to feed the input signal to an

amplier or further eects pedals.

4 True Bypass Pedal switch to enable True Bypass mode for feeding the

unchanged input signal to an amplier or another eects pedal.

Press the pedal switch to leave True Bypass mode and tune your

instrument. That mutes the output.

5 Display

6 Six output sockets for the power supply of further devices with

9V, each loadable with 100 mA.

7 Two output sockets for the power supply of further devices with

9V, each loadable with 500 mA.

500mA 100mA

9V OUT

OUTIN

PowerPlant Tuner

%ö

Technical specications

• Input connections 1 × socket for power adapter

1 × 1/4" jack socket

• Output connections 6 × socket for power supply of further devices, each 100 mA

2 × socket for power supply of further devices, each 500 mA

1 × 1/4" jack socket

• Tuning range 12 Hz … 4186 Hz

• Current consumption 120 mA (only PowerPlant Tuner, without connected devices)

• Output current 1600 mA

• Power supply External power adapter, 100 - 240 V ~ 50/60 Hz

• Operating voltage 9 V / 2 A, centre negative

• Degree of protection IP20

• Dimensions (W × H × D) 70 mm × 55 mm × 122 mm

• Weight 300 g (without power adapter)

• Ambient conditions Temperature range 0°C...40°C

Relative humidity 20%...80%

(non-condensing)

Harley Benton 372334 User guide

Brand: Harley Benton

Model: 372334

Category: Guitar accessories

Type: User guide

Harley Benton 372334

The 372334 has a True Bypass Pedal switch that allows you to feed the unchanged input signal to an amplifier or another effects pedal. Pressing the pedal switch mutes the output for tuning.

Download PDF

report

Harley Benton 372334 User guide

Harley Benton 372334 User guide

Related papers

Other documents