dji PILOT 2 User guide

Type
User guide

Below you will find brief information for Mavic 3E. This manual provides instructions on how to unlock no-flight zones using the DJI Pilot 2 application. It covers steps from powering on the devices to activating unlocking certificates. Users need an internet connection for steps 1 to 5. The manual also outlines how to refresh the NFZ database and import unlocking licenses. The unlocked areas are indicated on the map, and flights are restricted to these green zones while the certificate is active. Flying outside of the green zone requires deactivating the unlocking certificate.

Below you will find brief information for Mavic 3E. This manual provides instructions on how to unlock no-flight zones using the DJI Pilot 2 application. It covers steps from powering on the devices to activating unlocking certificates. Users need an internet connection for steps 1 to 5. The manual also outlines how to refresh the NFZ database and import unlocking licenses. The unlocked areas are indicated on the map, and flights are restricted to these green zones while the certificate is active. Flying outside of the green zone requires deactivating the unlocking certificate.

How to unlock
No-Flight-Zones
Using DJI Pilot 2
Note: Internet connection is required during steps 1 to 5.
Please prepare these in advance if there is no internet
connection in the unlocking area.
Power on the remote controller and the aircraft.
Make sure the remote controller has been linked to
the aircraft successfully and then launch DJI Pilot 2.
In DJI Pilot 2 click on the ‘profile‘ icon in the top left
corner. Then, click ‘Geo Zone Unlocking’.
Note: Make sure you are logged in with the DJI account,
which was used while submitting your unlock request.
Make sure that the aircraft and remote controller
are updated to the latest firmware version.
STEP 1
STEP 3
STEP 2
1
1
2
Refresh the NFZ database by clicking on the ‘Refresh’ icon in the
top right corner. Then, you will see that there is, at least, one new
unlocking package, under the ‘Refresh icon’. Click ‘Details’.
The unlocking licenses need to be imported into the
aircraft. Click ‘Import All’.
STEP 4
STEP 5
How to unlock No-Flight-Zones
Using DJI Pilot 2
22
1
2
How to unlock No-Flight-Zones
Using DJI Pilot 2
Activate the unlocking certificates with the toggle, and
confirm that you are authorized to fly and that you accept
full responsibility for your flight.
After activating the unlocking certificates, tap to view the
Map in the bottom left corner of DJI Pilot 2. The unlocked
area will be indicated on the map by a green zone (only for
Circle and Polygone licenses).
Note: You can only fly the aircraft within the green zone, while the
unlocking certificate is activated. To fly outside of the green zone,
deactivate the unlocking certificate.
If you have any question or any problem during the unlocking
procedure, please send an email to [email protected]
3
STEP 6
STEP 7 (Optional)
12
  • Page 1 1
  • Page 2 2
  • Page 3 3

dji PILOT 2 User guide

Type
User guide

Below you will find brief information for Mavic 3E. This manual provides instructions on how to unlock no-flight zones using the DJI Pilot 2 application. It covers steps from powering on the devices to activating unlocking certificates. Users need an internet connection for steps 1 to 5. The manual also outlines how to refresh the NFZ database and import unlocking licenses. The unlocked areas are indicated on the map, and flights are restricted to these green zones while the certificate is active. Flying outside of the green zone requires deactivating the unlocking certificate.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI