2. dji
  3. PILOT 2
PILOT 2

dji PILOT 2 User guide

  • Hello! I have reviewed the user manual for unlocking no-flight zones using the DJI Pilot 2 application, focusing on the Mavic 3E model. The document outlines the steps for preparing your device, refreshing the no-fly zone database, importing licenses, and activating the unlocking certificates. I'm ready to answer any questions you might have.
  • Is internet connection required?
    What should I do before unlocking without internet?
    Where to find unlocking package?
    Where unlocking areas are indicated?
    What if I want fly outside green zone?
How to unlock
No-Flight-Zones
Using DJI Pilot 2
Note: Internet connection is required during steps 1 to 5.
Please prepare these in advance if there is no internet
connection in the unlocking area.
Power on the remote controller and the aircraft.
Make sure the remote controller has been linked to
the aircraft successfully and then launch DJI Pilot 2.
In DJI Pilot 2 click on the ‘profile‘ icon in the top left
corner. Then, click ‘Geo Zone Unlocking’.
Note: Make sure you are logged in with the DJI account,
which was used while submitting your unlock request.
Make sure that the aircraft and remote controller
are updated to the latest firmware version.
STEP 1
STEP 3
STEP 2
1
[email protected]
1
2
Refresh the NFZ database by clicking on the ‘Refresh’ icon in the
top right corner. Then, you will see that there is, at least, one new
unlocking package, under the ‘Refresh icon’. Click ‘Details’.
The unlocking licenses need to be imported into the
aircraft. Click ‘Import All’.
STEP 4
STEP 5
How to unlock No-Flight-Zones
Using DJI Pilot 2
22
1
2
How to unlock No-Flight-Zones
Using DJI Pilot 2
Activate the unlocking certificates with the toggle, and
confirm that you are authorized to fly and that you accept
full responsibility for your flight.
After activating the unlocking certificates, tap to view the
Map in the bottom left corner of DJI Pilot 2. The unlocked
area will be indicated on the map by a green zone (only for
Circle and Polygone licenses).
Note: You can only fly the aircraft within the green zone, while the
unlocking certificate is activated. To fly outside of the green zone,
deactivate the unlocking certificate.
If you have any question or any problem during the unlocking
procedure, please send an email to fl[email protected]
3
STEP 6
STEP 7 (Optional)
12
/