Server 07794 User guide

Brand: Server

Model: 07794

Type: User guide

Squeeze pinch valve open

to ensure it isn’t stuck

shut, then insert into

pump housing.

Press dome into housing fully and wrap loop

around lower opening to secure.

Install tube by rotating

until both pegs on

housing t into holes

on tube.

Install connector by

rotating until both pegs

on connector t into

holes on tube.

Full assembled pump.

CONNECTOR MUST

POINT AWAY FROM END

OF DISCHARGE TUBE.

Insert discharge tting into discharge tube.

Place loop of tting around peg on end of

discharge tube.

Remove unit from

box. Wash, rinse,

sanitize, and air dry

pump parts properly

before use.

Server Express® Pump

Tips and tricks to help you get started with your new Server Express® pump.

QUICK START GUIDE

100698RevA

WANT TO LEARN MORE?

Visit server-products.com/manual-more for your

manual, part breakdown, support videos and more.

[email protected] | 800.558.8722

MODEL

XXXX

P/N

#####

SERIES

##X ##X

REFERENCE YOUR PART NUMBER

(P/N) LOCATED ON THE LID OR BASE.

Select discharge tting.

6Fittings are marked small,

medium or large on bottom.

THIN (hot sauce)

THICK (ketchup or mustard)

THICKER (relish or tartar sauce)

CONSISTENCY OF

WHAT YOU DISPENSE SUGGESTED

FITTING SIZE

SMALL

MEDIUM

LARGE

Server 07794 User guide

Server 07794 User guide

Related papers

Other documents