Power-Lite POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light Installation guide

Brand
Power-Lite
Model
POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light
Type
Installation guide

Power-Lite POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light is a mains powered LED panel light for indoor use only. It has a voltage input of AC220-240V/50/60Hz and uses the newest high efficiency constant current driver. The light is anti-electromagnetic interference, contains no mercury or lead, and has a recommended clearance from the rear heat sink to any flammable materials of 0.2m. It is suitable for use in a variety of applications, including hotels, meeting rooms, factories or offices, residences or public facilities, commercial use, schools, hospitals, and other environments.

Power-Lite POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light is a mains powered LED panel light for indoor use only. It has a voltage input of AC220-240V/50/60Hz and uses the newest high efficiency constant current driver. The light is anti-electromagnetic interference, contains no mercury or lead, and has a recommended clearance from the rear heat sink to any flammable materials of 0.2m. It is suitable for use in a variety of applications, including hotels, meeting rooms, factories or offices, residences or public facilities, commercial use, schools, hospitals, and other environments.

This installation must be carried out by an electrician. Please read these instructions carefully
before installation. Leave a copy for the user/maintenance engineer for future reference.
This is a mains powered product. Before installation, maintenance or cleaning please ensure
the power supply is isolated.
a.
b. If the product is not damaged in transport, it is supplied ready to use.
c. Clean using a dry cloth. No detergent or water to be used.
Installation Instructions
Safety
Maintenance
Notes
Applications
siht no ecnanetniam gnimrofrep ot roirp nwod delooc sah gnittif eht erusne esaelP
product.
LED SKY
PANEL
LED-SKY36W-60SQ-4
LED-SKY36W-60SQ-6
.revird tnerruc tnatsnoc ycneiciffe hgih tsewen eht gnisu ,zH06/05/V042-022CA :tupni egatloV
taht mrifnoc esaelp ,gnisu erofeB .dael on ,yrucrem on ,ecnerefretni citengamortcele-itnA
this product has not been damaged during transit.
seye eht diovA .nerdlihc morf yawa raf seirossecca llams dna lairetam gnikcap peek esaelP
sighting the LED light-emitting area directly
.
Please keep products and packaging away from open fire or high temperature goods.
The fixture must not be modified. And modification will void the warranty and can make the
product dangerous.
si slairetam elbammalf yna ot knis taeh raer eht morf ecnaraelc dednemmocer eht eton esaelP
0.2m. Under no circumstance should any insulation or similar be laid onto the fitting.
,loohcs ,esu laicremmoc ,seitilicaf cilbup ro ecnediser ,eciffo ro yrotcaf ,moor gniteem ,letoH
hospital and other environments.
LED panel light for indoor using only.
Certainty at The Speed of Light
1800 909 306
nedlandsgroup.com.au
[email protected]
1. Take off Ceiling plaster tablet. 2. Connect the Wire.
1 2
4. After steady the panel light, you
3. Fix the panel Light on into the can connect the electric current
to use.
ceiling screens.
3 4
1. Fix the ceiling frame into the 2. Fix the panel light on the ceiling
ceiling or wall. frame.
1 2
4. After steady the panel light, you
3. Connect the wire(AC/DC Wire) can connect the electric current
to use.
and put the location well.
34
1. Take off the cassette and install 2. Fix the cassette onto the ceiling.
the screw cassette.
1 2
4. Adjust the length of the iron line
3. Lock the Line controller into the well and the connect the power
supply, then you can power.
cassette.
34
Surface
Mounted
Recessed
Installation Steps
Certainty at The Speed of Light
Suspended
  • Page 1 1
  • Page 2 2

Power-Lite POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light Installation guide

Brand
Power-Lite
Model
POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light
Type
Installation guide

Power-Lite POWER-LITE LED-SKY36W-60SQ-4 LED Sky Panel Light is a mains powered LED panel light for indoor use only. It has a voltage input of AC220-240V/50/60Hz and uses the newest high efficiency constant current driver. The light is anti-electromagnetic interference, contains no mercury or lead, and has a recommended clearance from the rear heat sink to any flammable materials of 0.2m. It is suitable for use in a variety of applications, including hotels, meeting rooms, factories or offices, residences or public facilities, commercial use, schools, hospitals, and other environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents