Crystorama 5080-PB-CL-MWP User manual

Type
User manual

Crystorama 5080-PB-CL-MWP is a versatile and customizable chandelier designed to illuminate your space with a touch of sophistication. With its intricate crystal details and elegant metal finish, this chandelier adds a classic charm to any room. It features adjustable hanging height, allowing you to tailor it to your specific needs. The 10 candelabra-base bulb sockets, compatible with LED bulbs for extended use, provide ample and energy-efficient lighting. The detailed assembly instructions guide you through the installation process, ensuring a secure and proper setup.

Crystorama 5080-PB-CL-MWP is a versatile and customizable chandelier designed to illuminate your space with a touch of sophistication. With its intricate crystal details and elegant metal finish, this chandelier adds a classic charm to any room. It features adjustable hanging height, allowing you to tailor it to your specific needs. The 10 candelabra-base bulb sockets, compatible with LED bulbs for extended use, provide ample and energy-efficient lighting. The detailed assembly instructions guide you through the installation process, ensuring a secure and proper setup.

D
A
A
A
A
B
C
E
ASSEMBLY INSTRUCTION MODEL #5080- PB-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
WARNING:
Electrical Danger
Turn Power Off
You will need 10- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local elecrical codes
The fixture is Dry rated
A. 60 Sets. (1)14mm + AS9-2"
B. 1 Piece. (2)14mm + AS8-40mm Ball
C. 5 Sets. (19)14mm
E. 5 Sets. (1)14mm + AS9-1.5"
Crystal Sets
D. 5 Sets. (15)14mm
DETAILED ILLUSTRATION
Top Bowl:
Alternate A & C
(1)Bobeche
with Ax5
A
A
C
Bottom Bobeche
with Ax5
A
Center Bobeche
with Ex5
E
WARING:This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov
HOW TO INSTALL:
Place the fixture parts on a soft
cloth-covered platform before
installation of fixture.
1. To install the upper arms, slightly loosen each
screw on the metal plate.
Pull a female plug through a hole in the upper
metal plate.
Connect the male plug at the end of the upper
arm with the female plug that was just pulled.
Push the end of the arm with the metal tab
through the hole until stopped by the metal tab
(this should also push the wires and plugs back
inside the metal plate).
Twist the metal tab counter-clock wise until both
inserts lock onto the loose screws.
Tighten the screw securing the arm in place.
Repeat for all upper arms using every other hole.
2. Repeat Step1 for the lower arms using the
holes that were left-over in Step1.
3. Place the bottom bowl,check ring, bobeche,
check ring, in that order,over the bottom
distributor box.
Secure with the finial.
5. Attach the mounting bar onto the
outlet box.
6. Decide the desired hanging height and
adjust the chain to the correct length.
7. Raise the fixture up and do the wire
connection. Attach the canopy over the
mounting bar and secure with collar ring.
4. Screw the Center column kit onto the
distributor box.
8. Dress the crystals as illustrated.
Outlet Box
A
BC
DF
E
H
I
G
J
ASSEMBLY INSTRUCTION MODEL #5080- PB-CL-MWP
LIGHTING THE WAY FOR SIXTY YEARS
Part Number
K
L
M
N
O
P
Q
R
Arm with
Metal tab
Screws
Plate
Male Plug
Female Plug
Part Numbers
C. (1)-Lock Washer
D. (1)-Hex Nut
A. (2)-Wire Connector
K. (1)-Center Column Kit
Top Bowl ; Ø6",10pin,14mm center hole.
Glass Vase; H8"
Center Bobeche ; Ø4",5pin,24mm center hole.
-XSN5080PBBOB5PN
Glass Vase; H6"
Metal Cover;Ø1",H2"
B. (1)-Mounting Bar
N. (5)-6"Upper Arms with holder.
-XSN529GDARM6INKD
O. (5)-8"Lower Arms with holder.
-XSN503GDARM8INKD
E. (1)-Nipple
F. (1)-Canopy (W5"xH1")-XSN5080PBCAN5IN
G. (1)-Collar Ring
H. (1)-Collar Loop
I. (1)-Chain (4mmx72")-XSN5080PBCHA4MM
M. (11)-Bobeche ; Ø4",5pin,24mm center hole.
-XSN5080PBBOB5PN
P. (10)-Male Plug
R. (1)-Bottom Bowl ; Ø6",no pin,14mm center hole.
S. (2)-Check Ring ; Ø1 3/8"
T. (1)-Finial-XSN5080PBFIN
L. (10)-PVC Candle Sleeve
Q. (1)-Distributor Box
J. (1)-Center Column Kit Loop
S
M
TS
  • Page 1 1
  • Page 2 2

Crystorama 5080-PB-CL-MWP User manual

Type
User manual

Crystorama 5080-PB-CL-MWP is a versatile and customizable chandelier designed to illuminate your space with a touch of sophistication. With its intricate crystal details and elegant metal finish, this chandelier adds a classic charm to any room. It features adjustable hanging height, allowing you to tailor it to your specific needs. The 10 candelabra-base bulb sockets, compatible with LED bulbs for extended use, provide ample and energy-efficient lighting. The detailed assembly instructions guide you through the installation process, ensuring a secure and proper setup.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI