VISUAL COMFORT CHC5010AICG User manual

VISUAL COMFORT
Brand
VISUAL COMFORT
Model
CHC5010AICG
Type
User manual

VISUAL COMFORT CHC5010AICG is a stylish and functional chandelier that can elevate the ambiance of any room. With its adjustable chain length, you can customize the height to suit your space. Installation is made simple with the included instructions and necessary mounting hardware. The chandelier features multiple sockets, allowing you to adjust the brightness by using the appropriate number of bulbs (not included). The glass discs add a touch of elegance and help diffuse the light, creating a warm and inviting atmosphere.

VISUAL COMFORT CHC5010AICG is a stylish and functional chandelier that can elevate the ambiance of any room. With its adjustable chain length, you can customize the height to suit your space. Installation is made simple with the included instructions and necessary mounting hardware. The chandelier features multiple sockets, allowing you to adjust the brightness by using the appropriate number of bulbs (not included). The glass discs add a touch of elegance and help diffuse the light, creating a warm and inviting atmosphere.

1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Remove collar loop (D) from chain (H) by removing quick link (E).
3. Install mounting plate (B) to the junction box and secure with
mounting screws (C).
4. Secure collar loop (D) to mounting plate (B) using pliers to tighten
locknut.
5. Install canopy (F) to collar loop (D) and secure with collar ring (G).
6. Determine desired overall length, and amount of chain (H) needed.
Shorten chain using chain pliers. (Keep extra chain)
7. Install rod (J) to fixture body (M).
8. Attach chain (H) to collar loop (D) and fixture loop (I) using quick
links (E). Secure quick links (E).
9. Thread fixture wire and ground wire through chain (H).
NOTE: When you reach the collar loop (D), ensure there is no tension
on the wires. Cut excess wires, being sure to leave about 12” to reach
the junction box.
10. Separate two sides of molded wire, and strip insulation on each 5/8".
11. Loosen collar ring (G) and let canopy (F) slip down chain (H) carefully.
12. Twist all fixture wires together, and slip through center hole of collar
loop (D).
NOTE: Untwist wires and separate to prepare for connection.
Danvers Medium Chandelier
Item # CHC 5010
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Phillips Screwdriver Slotted Screwdriver Chain Pliers
Slip Joint Pliers Measuring Tape Wire Cutters
Wire Strippers
NOTICE:
US
M
L
I
D
S
E
T
CB
D
E
E
I
JK
L (5pcs)
N
M
L (5pcs)
F
G
H
A
Diagram 1 Diagram 2
Diagram 3
Bulbs not included
Danvers Medium Chandelier
Item # CHC 5010
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
13. Wrap fixture ground wire (bare copper) around the green grounding
screw (see diagram 1). Tighten. Continue fixture ground wire and
connect to supply ground wire (usually green or bare copper) using
wire nut (A).
NOTE: It is imperative that the fixture is grounded.
14. Connect fixture neutral wire (ribbed) to the supply neutral wire (usually
white) using wire nut (A).
15. Connect fixture hot wire (smooth with markings) to the supply hot
wire (usually black) using wire nut (A).
CAUTION: Do not reverse the hot and neutral connections.
16. Make sure all wire connections are tight, then carefully tuck into the
junction box.
17. Install canopy (F) to collar loop (D) and secure with collar ring (G).
18. Install light bulbs into the sockets.
19. Hang glass discs (L) to the hooks on ends of brackets (K).
See diagram 2.
20. Hang the remaining glass discs (L) to the hooks on bottom of fixture
body. See diagram 3.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do
Not use abrasive or chemical agents.
NOTICE:
US
M
L
I
D
S
E
T
CB
D
E
E
I
JK
L (5pcs)
N
M
L (5pcs)
F
G
H
A
Diagram 1 Diagram 2
Diagram 3
Bulbs not included
  • Page 1 1
  • Page 2 2

VISUAL COMFORT CHC5010AICG User manual

VISUAL COMFORT
Brand
VISUAL COMFORT
Model
CHC5010AICG
Type
User manual

VISUAL COMFORT CHC5010AICG is a stylish and functional chandelier that can elevate the ambiance of any room. With its adjustable chain length, you can customize the height to suit your space. Installation is made simple with the included instructions and necessary mounting hardware. The chandelier features multiple sockets, allowing you to adjust the brightness by using the appropriate number of bulbs (not included). The glass discs add a touch of elegance and help diffuse the light, creating a warm and inviting atmosphere.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents