Jesco CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light User manual

Brand
Jesco
Model
CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light
Type
User manual
Home » JESCO » JESCO CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light Instruction Manual
Contents
1 JESCO CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling
Light
2 INSTALLATION INSTRUCTIONS
3 COMPATIBLE DIMMERS
4 ASSEMBLY INSTRUCTIONS
5 TOOLS REQUIRED
6 INSTALLATION
7 Documents / Resources
7.1 References
8 Related Posts
JESCO CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light
INSTALLATION INSTRUCTIONS
JESCO CM404RA-07R Luke LED 7 Inch White Flush Mount
Ceiling Light Instruction Manual
Manuals+ — User Manuals Simplified.
LED TRIMLESS SURFACE MOUNT 7″/9″/11″
PACKAGE CONTENTS
COMPATIBLE DIMMERS
LUTRON
PD-6WCL
DVCL-153P
CTCL-153P
MACL-153M
TGCL-153P
LEVITON
6681
6672
WARNING
FOR YOUR SAFETY READ AND UNDERSTAND INSTRUCTIONS COMPLETELY BEFORE STARTING
INSTALLATION. BEFORE WIRING TO POWER SUPPLY, TURN OFF ELECTRICITY AT THE FUSE OR CIRCUIT
BREAKER BOX.
CAUTION: RISK OF FIRE
SUPPLY CONDUCTORS (POWER WIRES) CONNECTING THE FIXTURE MUST BE RATED MINIMUM 90°C. IF
UNCERTAIN, CONSULT AN ELECTRICIAN.
CAUTION: RISK OF ELECTRIC SHOCK
DISCONNECT POWER BEFORE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING.
SAFETY PRECAUTIONS
FOR SAFETY, READ AND UNDERSTAND INSTRUCTIONS COMPLETELY BEFORE STARTING
INSTALLATION. ELECTRICITY SHOULD BE TURNED OFF AT THE FUSE OR THE CIRCUIT BREAKER BOX
BEFORE INSTALLING THE FIXTURE. ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH
N. E. C. OR YOUR LOCAL CODE.
ASSEMBLY INSTRUCTIONS
1. PREPARING FOR INSTALLATION: DISCONNECT ELECTRICAL POWER BEFORE INSTALLING OR
SERVICING ANY PART OF THIS FIXTURE.
2. THIS PRODUCT SHALL BE SURFACE MOUNTED WITH JUNCTION BOX OR NON-COMBUSTIBLE
SURFACE ABOVE 4 FEET (1.2 METER) HIGH. USER SHOULD PREPARE NECESSARY ACCESSORIES
AND SPARE PARTS (NOT PROVIDED) INCLUDING JUNCTION BOX AND SCREWS.
TOOLS REQUIRED
INSTALLATION
INSTALLATION: OPTION 1 : FLUSH MOUNT
Step 1: Prior to installation, install mounting plate into electrical outlet box with mounting screws. Drive screws
completely to the end of the junction box.
Step 2: Connect supply wires to wires on the fixture with wire nuts, or push wires into Quick Connector.
Connect white to white, black to black, and copper wire to copper wire as grounding connection.
Step 3: Complete installation by pushing the fixture into the mounting plate
WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
INSTALLATION : OPTION 2 : RETROFIT RECESSED CAN
Step 1: Insert wires into Quick Connector. Black to black and white to white. Attach ground wire to ground
screw in recessed can.
Step 2: Place E26 lamp holder into socket base.
Step 3: Connect quick connectors and tuck all wires into recessed can. Squeeze springs and push up into
recessed can.
www.jescolighting.com
support@jescolighting.com
Tech Support: 855.592.0029
Documents / Resources
JESCO CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light [pdf] Instruction
Manual
CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light, CM404RA-07R, Luke LED 7
Inch White Flush Mount Ceiling Light, White Flush Mount Ceiling Light, Flush Mount Ceiling Lig
ht, Mount Ceiling Light, Ceiling Light, Light
References
JESCO Lighting Group - LED Lighting Portal - Premier LED Light Source
Manuals+,
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Jesco CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light User manual

Brand
Jesco
Model
CM404RA-07R Luke LED 7 Inch White Flush Mount Ceiling Light
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents