OSD Audio SS2V70 User manual

Brand: OSD Audio

Model: SS2V70

Type: User manual

OSD Audio SS2V70 is a 70V speaker selector designed for commercial audio applications. It features two independent zones, each with a 200-watt, 70-volt mono volume control and on/off switch. The unit has a single 2-conductor input and a direct pass-through output, allowing for the connection of additional SS2V70 units. It supports up to 10 attenuation steps and full off, with a frequency response of 20Hz-22KHz. The SS2V70 is ideal for use in restaurants, retail stores, offices, and other commercial spaces.

~UDIO

SS2V70-200W

The SS2V70-200W is a unique 70V Speaker Selector featuring ...

ZONE

70 VOLT

SPEAKER

SELECTOR

2 independent Zones each controlled by a 200 Watt 70V Mono Volume Control featuring a Rotary Style Knob. Each zone

has On/Off switch as well. The unit has a single 2 conductor input and direct pass through allowing to stack additional

SS2V70 Speaker selectors only limited by your application. Standard 70V rules apply to the number of speakers used per

zone, matching the available power from the 70V amplifier.

Front

Panel

Zone 1 On/Off Switch

2. Zone 1 Volume Knob

Zone 2 On/Off Switch

4. Zone 2 Volume Knob

Note #1: The Zone 1 & 2 On/Off button allows you to turn each zone off

independently of the volume knob

Rear Panel

Zone 2 Speaker Output

2. Zone 1 Speaker Output

-lnput From Amplifier

4. Straight Thru Output

-·-

. .

--'""!'-

.,.,,

Note #2: The Thru output comes directly from the Input, it does not go

through the transformer allowing you to stack multiple SS2V70.

Specifications

Power Handling:

Frequency Response:

Selector Type:

Steps:

Connection Type:

Wire Size Acceptance:

Amplifier Protection:

Weight:

Dimensions:

200 Watts Per Channel/Zone Mono Single Channel

20Hz-22KHz

(+O

dB, -0 dB)

Noise-Free, front access On/Off Pushbutton and Rotary Knob

33 dB, 1 O steps plus full off (step

11)

Removable Input/output Connectors

16 Gauge 2 Conductor

70V Mono only No Impedance Protection Needed

3.6 lbs

(WxHxD) 5.5 x 2.25 x 6.25"

//////

Power

Rating

The Internal Volume Controls (2) are rated at 200W

the speaker(s) connected to it needs the transformer setting to

be equal to or less than the rated watts of each zone.

You

can have multiple speakers connected to one zone but total

wattage must 80% or less than the rated Wattage of the each of the intern.

200 Watt Volume Controls.

STEP

ATTENUATION

10 Full Volume 0dB

9 3dB Minus 3dB

8 3dB Minus 6dB

7 3dB Minus 9dB

SS2V70

0 0

6 3dB Minus 12dB

5 3dB Minus 15dB

4 3dB Minus 18dB

ZONE1

ZONE2

3 3dB Minus 21dB

~- ~-

2 6dB Minus 27dB

1 6dB Minus 33dB

0 0dB Speaker Off

Picking

the

Right

Distribution Amplifier

start with the Amplifier must have a 70Volt output.

must have an output power rating equal to or greater than the total

wattage of the system once you have calculated what each speaker should be set to and the total sum of those settings.

you had four speakers at 5 watts each (20 total) and one speaker set to 10 watts (20 + 1 O = 30) your amplifier must

be rated at least 30 watts minimum. If you had five speakers at 10 watts each (50 total) and another 5 five speakers at 5

watts each (25 + 50 = 75) you would need a amplifier rated at a minimum 75 watts.

Some companies recommend the total should be closer to 80% of the minimum rating of the amplifier.

also a good

idea to install

amplifier with more than enough power

case you want to add more speakers later.

Key

Point:

The Power rating of the amplifier is determined by the transformer settings, not the attenuator Rating, The

rated power of the Attenuator

based upon the minimum setting of the transformer taps which have to be equal to or less

than the rated wattage of the respective SS2V70 Attenuator.

Limited

Warranty

OSD Audio will repair or replace any defect it

material or workmanship which occurs during normal use of this product

with new or rebuilt parts free of charge

the

for five years from date of original purchase. This warranty does not cov-

er damages

shipment, failure caused by other products not supplied by OSD Audio or failures due to accident, misuse,

or alteration of the equipment. This warranty

extended only to the original purchaser and a purchase receipt, invoice or

other proof of original date will be required before warranty repairs are provided

Mail

service can be obtained during period by emailing [email protected]. A return authorization number must

be obtained

advance and be marked

the outside of the shipping carton.

This warranty gives you specific legal rights and may have other rights (which vary from state to state).

a problem with

this product develops during or after the warranty period please contact OSD Audio or your dealer.

OSD Audio I Brea,

I osdaudio.com

New SSVC2V7; 2 Zone, 70V Mono Speaker Selector with Built in 100W

70V Mono Volume Control x 2 and Straight Pass Thru Output

Zone 1

On/Off

Switch

Specifications

•Power Handling: 100 Watts Per Channel/Zone Mono Single Channel

•Frequency Response: 20Hz-22KHz (+0 dB, -0 dB)

•Selector Type: Noise-Free, front access On/Off Pushbutton and Rotary Knob

•Steps: 33 dB, 10 steps plus full of (step 11)f

•Connection Type: Removable Input/output Connectors

•Wire Size Acceptance: 16 Gauge 2 Conductor,

•Amplifier Protection: 70V Mono only No Impedance Protection Needed

Front Panel SSVC2V7

The SSVC2V7 is a unique 70V Speaker Selector featuring…

2 independent Zones each controlled by a 100Watt 70V Mono Volume Control featuring a Rotary style

Knob. Each zone has On/Off switch as well. The unit has a single 2 conductor input and direct pass thru

allowing to stack additional SSVC27V Speaker selectors only limited by your application. Standard 70V

rules apply to the number of speakers used per zone, matching the available power from the 70V

amplifier

Zone 1

On/Off

Switch

Zone 2

Volume

Knob

Note #2: The Thru output comes

directly from the Input, it does not

go through the transformer allowing

you to stack multiple SSVC7V.

Note #1: The On/Off switch is supply so

you can turn off each zone completely

not just depend on the Volume Control

to turn so the sound down to inaudible

levels. The knob would need to be

turned all the way counterclockwise for

full off

Input

from Amplifier

Straight Thru

Output

ZONE 1 Speaker

Output

ZONE 1 Speaker

Output

Back Panel SSVC2V7

Zone 1

Volume

Knob

OSD Audio Limited Warranty

OSD Audio will repair or replace any defect it in material or workmanship which occurs during normal use of this product

with new or rebuilt parts free of charge in the US for five years from date of original purchase. This warranty does not

cover damages in shipment, failure caused by other products not supplied by OSD Audio or failures due to accident,

misuse, or alteration of the equipment. This warranty is extended only to the original purchaser and a purchase receipt,

invoice or other proof of original date will be required before warranty repairs are provided

Mail in service can be obtained during period by emailing RMA@osdaudio.com. A return authorization number must be

obtained in advance and be marked on the outside of the shipping carton.

This warranty gives you specific legal rights and may have other rights (which vary from state to state). If a problem

with this product develops during or after the warranty period please contact OSD Audio or your dealer

OSD Audio · 775 Columbia St., Brea CA 92821 · www.osdaudio.com

Power Rating:

The Internal Volume Controls (2) are rated at

100W so the speaker(s) connected to it needs the

transformer setting to be equal to or less than the

rated watts of each MVC. You can have multiple

speakers connected to one MVC but total wattage

must 80% or less than the rated Wattage of the

each of the internal 100 Watt Volume Controls.

Picking the right Distribution Amplifier:

To start with the Amplifier must have a 70Volt output. It must have an output power rating equal to or greater than the

total wattage of the system once you have calculated what each speaker should be set to and the total sum of those

settings. If you had four speakers at 5 watts each (20 total) and one speaker set to 10 watts (20 + 10 = 30) your amplifier

must be rated at least 30 watts minimum. If you had five speakers at 10 watts each (50 total) and another 5 five speakers

at 5 watts each (25 + 50 = 75) you would need a amplifier rated at a minimum 75 watts.

Some companies recommend the total should be closer to 80% of the minimum rating of the amplifier. It is also a good

idea to install an amplifier with more than enough power in case you want to add more speakers later.

Key Point: The Power rating of the amplifier is determined by the transformer settings, not the attenuator Rating, The

rated power of the Attenuator is based upon the minimum setting of the transformer taps which have to be equal to or less

than the rated wattage of the respective MVC Attenuator

STEP

ATTENUATION

Full Volume

0dB

9 3dB minus 3dB

8 3dB minus 6dB

7 3dB minus 9dB

6 3dB minus 12dB

5 3dB minus 15dB

4 3dB minus 18dB

3 3dB minus 21dB

2 6dB minus 27dB

1 6dB minus 33dB

0 0dB Speaker off

Internal Volume

Control Specs:

10 Step, 33dB

Plus Full Off

Features and Specifications

DECORA style high-quality auto transformer provides advantages of excellent frequency response, low insertion loss

and reliable performance for volume control applications in 25 and 70 volt systems. Attenuation is accomplished in ten

make before break steps plus positive off position (no stop between maximum and off position to prevent switch

damage). The Attenuator features removable input/output terminal blocks, Two in, two out and two optional for

through output for daisy chain option. An attractive alternative to Commercial series attenuators mounts into most

single gang E.O boxes. UL Listed White, Almond and Ivory Plastic Plates with Matching Skirted Knobs in DECORA® Style

New SSVC2V7; 2 Zone, 70V

Mono Speaker Selector

OSD Audio SS2V70 User manual

OSD Audio SS2V70 User manual

OSD Audio SS2V70 User manual

Related papers

Other documents