WHAT YOU WILL HAVE
Action Free
TO KNOW ACTION FREE
USB Charger Cable User Manual
WEARING ACTION FREE
GET STARTED WITH ACTION FREE
1. Download your favorite app (with heart rate function).
2. Press the button to turn on Action Free, and the LED light
will start to flash blue.
3. Make sure Bluetooth or ANT+ is activated on your smartphone
or device, then pair the App with Action Free.
TURN OFF ACTION FREE
2. When the red light is constantly shining, please release the button.
1. Hold the button for 2 seconds, the LED light will flash BLUE-RED.
HOW TO CHARGE ACTION FREE
1. Make sure Action Free and USB charger cable are completely dry.
2. Plug your USB charger cable into the USB port of the computer.
( or you can use USB adapter to charge)
3. Put the pin of the charger cable right on the socket at the back of Action Free
as the image below.
SPECIFICATION
WARRANTY
We provide limited one-year warranty for Action Free valid from the date of purchase.
● The warranty does not cover the battery, damage due to misuse, abuse, accidents
or non-complicance with the precautions.
● The warranty does not cover any damage, losses, costs or expenses, directly or
indirectly related to the product.
● Items purchased second-handed are not covered within warranty, unless otherwise
stipulated by local law.
The warranty will only be provided when you purchase from the company authorized
by TopAction.
WARNING & TROUBLESHOOTING
Warning :
● Action Free is not a medical device. It’s just a tracker to detect your heart rate during
● If you have an allergic reaction or skin irritation while using Action Free with wristband,
please stop using it immediately and consult a doctor.
exercise.
● Do not disassemble Action Free, or attempt to repair it by yourself.
Troubleshooting :
If Action Free cannot pair with your device or measure your heart rate successfully,
or the data is not stable, you may check :
● If your device does not support Bluetooh 4.0 or ANT+.
● If Bluetooth or ANT+ is not activated in your device.
● If the protection pad is still on optical sensor, please remove it.
● If the data is not well detected when the sensor is used in very cold weather, please
use it indoors, or wear a long sleeve to cover the Action Free.
● If Action Free still cannot work properly, try to wear it on another hand or the position
we suggest (wrist / forearm / upper arm).
● Wear the Action Free around your wrist, forearm or upper arm.
● Please turn on the Action Free first (press the button) before wearing it.
● The heart rate sensor should be on the underside of the wristband firmly against
your skin. To measure heart rate accurately and stably, you should wear it snugly
and securely (but not too tight and keep the blood flowing).
Remarks:
1. You can download any heart rate Apps on your Andriod / iOS devices to pair
with Action Free.
2. You can connect any Bluetooth 4.0 or ANT+ enabled device with Action Free.
3. The device (e.g. smartphone) should be within 3 meters long from the sensor.
4. Stay at least 10 meters away from other Bluetooth 4.0 or ANT+ sensors while
pairing with Action Free.
Armband
(37cm)
Button
LED Indicator
Charging Port
Heart Rate Sensor
Battery Type
Operating Time
Operation Temperature
Wireless System
Waterproof
Rechargeable Battery
Up to 12 hours of continuous training
0℃ to 50℃ (32℉ to 122℉)
Bluetooth 4.0 & ANT+
IP68
5020100742
Action Free
Wrist
Forearm
Upper Arm