Pro-Ject Audio System X2B Turntable User manual

Brand: Pro-Ject Audio System

Model: X2B Turntable

Type: User manual

This manual is also suitable for

Pro-Ject Audio System X2B Turntable

INSTRUCTIONS FOR USE

X2B

Controls, features and connections

(1) MAIN PLATTER

(2) CHASSIS

(3) SPEED CONTROL

(4) MOTOR WITH MOTOR PULLEY

(5) DRIVE BELT

(6) SUB-PLATTER

(7) TONEARM FLANGE

(8) TONEARM COUNTERWEIGHT

(9) TONEARM LIFT

(10) TONEARM REST AND REMOVABLE TRANSPORT LOCK

(11) CARBON / ALUMINIUM TONEARM TUBE

(12) HEADSHELL WITH FINGER LIFT

(13) ANTI-SKATING WEIGHT WITH THREAD

(14) ANTI-SKATING WEIGHT SUPPORT

(15) ANTI-SKATING STUB WITH ANTI-SKATING ADJUSTMENT SCALE

(16) LID HINGE

(17) HINGE FASTENERS

(18) LID

(19) PHONO OUTPUT SOCKET WITH MINI XLR AND RCA OUTPUT

(20) POWER SUPPLY SOCKET

(21) MAIN POWER BUTTON

Turntable accessories

(1) Instruction for use

(2) Cartridge alignment protractor

(3) Anti-skating weight

(4) Allen key 1.5mm

(5) Allen key 2mm

(6) Allen key 3mm

(7) Counterweight no. 31 for cartridges with weight between 7 - 12g

(8) Single adaptor

(9) Connect IT E RCA 1,23m

(10) Power supply

(11) Round drive belt for 78 r.p.m.

(12) White cotton gloves

CONTENTS

TURNTABLE OVERVIEW 2 - 3

ACCESSORIES OVERVIEW 3

SETUP AND INSTALLATION

1. PLATTER AND DRIVE BELT ASSEMBLY 6

2. MOUNTING AND CONNECTING THE CARTRIDGE 6

3. CARTRIDGE DOWNFORCE ADJUSTMENT 6 - 7

4. ANTI-SKATING FORCE ADJUSTMENT 7

5. CONNECTION TO THE AMPLIFIER 7 - 8

6. MAINS POWER CONNECTION 8

7. FITTING THE LID 8

8. SWITCHING ON AND OFF 8

9. CHANGING REPLAY SPEED 8

10. ADJUSTING THE VERTICAL TRACKING ANGLE (VTA) 8 - 9

11. ADJUSTING THE AZIMUTH 9

12. USEFUL TIPS 9 - 10

13. MAINTENANCE AND CLEANING 10

TECHNICAL SPECIFICATIONS 10

WARRANTY, SERVICE 11

PACKAGING 12

Dear music lover,

Thank you for purchasing a Pro-Ject Audio Systems record player.

In order to achieve maximum performance and reliability, please study these instructions carefully.

Warning of a hazard for the user, the unit or possible misuse

Important notice

The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a

different model at a later date.

During assembling and adjustment small parts could be lost if they are not carefully placed in a suitable

receptacle. Before starting assembly make yourself acquainted with the parts listed above which are

correspondingly numbered in the technical drawings above.

Safety instructions

The power supply is used to connect and disconnect the unit from the mains. Make sure that the plug

is easily accessible at all times.

Hold the plug when unplugging the power cord. Never handle the

power cord while your hands are wet or damp.

Avoid letting liquids enter the device. Never place any item containing liquid, like a flower vase, on

or near the device. Never spill any liquid on the device. Never place any naked flame sources, like

lighted candles, on or near the device. The product shall not be used in damp or wet locations, next to

a bathtub, sink, swimming pool or any other similar conditions.

Keep plastic bags away from children to prevent any risk of suffocation.

The turntable was shipped partially disassembled in order to avoid damage to sensitive parts.

Please check immediately to make sure that neither the packaging nor the device was damaged in

transit.

SETUP AND INSTALLATION

1. PLATTER AND DRIVE BELT ASSEMBLY

Install the drive belt (5) and the main platter (1) as shown in following ilustration.

2. MOUNTING AND CONNECTING THE CARTRIDGE

All cartridges with half inch mounting holes can be mounted. Leave the needle's protection cover on, fit the

cartridge to the headshell by using the supplied screws by passing one screw through each slot in the

headshell (12). Do not tighten the nuts yet.

Connect the tonearm wires with the cartridge pins as follows:

white left channel positive (L+)

red right channel positive (R+)

green right channel return (R-)

blue left channel return (L-)

The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly. Particular

tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly. If you are not

well acquainted with the adjustment of cartridges, please call for the willing help of your Pro-Ject Audio Systems

dealer.

Please note: adjusting a cartridge and tonearm calls for the greatest care in order to avoid damaging

the cartridge or tonearm bearings. Ask your local dealer for help if you are unsure in any of the

necessary steps and precautions which must be taken.

3. CARTRIDGE DOWNFORCE ADJUSTMENT

The counterweight (8) supplied is suitable for cartridges weighing between 7 - 12g (counterweight no. 31).

Adjust the downforce prior to setting the anti-skating force.

Place counterweight (8) halfway along the counterweight support rod at rear of arm, so that the downforce

scale shows towards the front of the player. Lower the armlift and position the cartridge in the space between

arm rest and platter. Carefully rotate the counterweight (8) until the armtube balances out. The arm should

return to the balanced position if it is moved up or down. This adjustment must be done carefully. Do not

forget to remove the cartridge protection cap if fitted.

Once the arm is correctly balanced return it to the rest. Hold the counterweight (8) without moving it, and gently

revolve the downforce scale ring until the zero is in line with the anti-skating prong. Check whether the arm still

balances out.

Rotate the counterweight counter clockwise (seen from the front) to adjust the downforce according to the

cartridge manufacturer's recommendations.

The recommended downforce for the factory fitted cartridge is 18mN.

4. ANTI-SKATING FORCE ADJUSTMENT

Unpack (14) ANTI-SKATING STUB WITH ANTI-SKATING ADJUSTMENT SCALE and screw it into the pre-

drilled hole (see image down below). Unpack (13) ANTI-SKATING WEIGHT WITH THREAD and put the anti-

skating thread hook over the correct groove for your cartridge’s downforce on the anti-skating adjustment

scale. The anti-skating force must be adjusted corresponding to the downforce as follows:

Downforce Groove in the stub (15)

10 - 14mN 1st from bearing rings

15 - 19mN 2nd " " "

20mN and bigger 3rd " " "

5. CONNECTION TO THE AMPLIFIER

The record player offers gold plated female RCA phono sockets and a mini XLR output for the connection to

your amplifier.

To use our True Balanced Connection, your Pro-Ject turntable needs to be equipped with an MC

cartridge!

RCA OUTPUT:

Use the supplied Connect it E Phono cable and connect it to a Phono input (sometimes labelled gram, disc

or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the

type of cartridge used. Line inputs (like CD, Tuner, Tape or Video) are not suitable.

Take care about connecting the left and right channel correctly. The RIGHT CHANNEL is usually marked

RED, the LEFT CHANNEL BLACK or WHITE. Check the manual of your amplifier for relevant information. An

earthing wire may be connected to the screw terminal between the sockets if you encounter humming

problems.

If your amplifier does not have an input suitable for phono cartridges, a separate phono amplifier stage for

MM or MC cartridges is required. It has to be connected between record player and a free line level input of

the amplifier.

Screw ANTI-SKATING STUB

into the pre-drilled hole here:

MINI XLR OUTPUT:

To use the mini XLR output & take full advantage of the true balanced connection your turntable needs to be

equipped with an MC cartridge. „True Balanced Connection“ phono cables are available separately. You

can find more details on our website or ask your Pro-Ject dealer for information.

For detailed product information regarding Pro-Ject Audio Systems interconnect cables and phono amplifiers

please visit our website: www.project-audio.com

6. MAINS POWER CONNECTION

The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before

connecting to ensure compliance with the mains rating in your house.

Connect the low voltage plug from the power supply to the socket

(20)

on the rear of the record

player before connecting the power supply to the mains.

7. FITTING THE LID

Fit the lid (dust cover 18) carefully over the hinge prongs and adjust the screws (17) until the lid stays open

where you want it to without being too stiff to open or close.

8. SWITCHING ON AND OFF

Press the main power button (21) to start the turntable.

9. CHANGING REPLAY SPEED

To play records at 33 r.p.m. press the speed control button (3). Pressing the speed control button one more

time selects 45 r.p.m. The selected speed is shown respectively by the flashing LED. When the platter has

attained full speed, the LEDs stop flashing.

To be able to play 78 r.p.m. the flat drive belt has to be removed and the round drive belt has to be fitted

around the sub-platter (6) and the larger diameter part of the motor pulley (4). To do so the main platter (1)

has to be removed.

After the round drive belt has been fitted, pressing the speed control button two times selects 78 r.p.m..

When full speed is attained the LED 45 stops flashing.

10. ADJUSTING THE VERTICAL TRACKING ANGLE (VTA)

Put a record on the platter. When the needle is lowered into the record groove and the tonearm is not resting on

the lift arm, the tube of the tonearm should be parallel to the surface of the record.

If it is not, loosen both hexagon screws in the tonearm base just enough to allow vertical movement of the

arm pillar without force and slide the arm up or down until it is parallel.

Retighten the hexagon screws without applying excessive force (which would deform the arm pillar) – finger

tight is quite sufficient.

11. ADJUSTING THE AZIMUTH

The cartridge needle must be vertical in the record groove in order to trace the groove wall modulations

correctly.

A small screw at the bearing end of the arm allows incorrect azimuth to be corrected.

Slacken off the screw just enough to be able to revolve the arm tube without applying force. Note! Do not

remove this screw completely!

12. USEFUL TIPS

The lid is not only a dust cover but also a resonant structure likely to be excited by and to pass into the plinth

the acoustic energy emanating from your loudspeakers during replay. Therefore, it is recommended to

remove the lid for achieving a better sound quality. The record player should be positioned on a low-

resonance surface, like wood or multiple layer ply board to avoid structural vibrations disturbing replay.

13. MAINTENANCE AND CLEANING

Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic

cloth. Never use a dry cloth because this will create static electricity which attracts even more dust! Antistatic

cleaning fluids are available at specialized stores but must be applied sparingly to avoid damage to rubber

parts. It is recommended to fit the needle cover before cleaning or maintenance to avoid damage.

If the player is not used over a long period of time, the drive belt should be removed to prevent unequal

stretching.

Always disconnect the record player from the mains power supply as a precaution before maintenance!

TECHNICAL SPECIFICATIONS

X2B

Pro-Ject 9’’ Carbon/Alu sandwich tonearm

Nominal speeds 33/45/78 r.p.m.

Speed variance 33: ±0.25 % 45: ±0.20 %

Wow and flutter 33: ±0.12 % 45: ±0.10 %

Signal to noise -70dB

Effective tonearm mass 13.5g

Effective tonearm length 9 " (230mm)

Overhang 18mm

Power consumption 5W/ 0.3W standby mode

Outboard power supply 15V/ 0.8 A DC, universal power supply

Dimensions (W x H x D) 460 x 150 x 340mm, dust cover open 460 x 415 x 435mm

Weight 10 kg

Potential incorrect use and fault conditions

Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before

leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but

can sometimes be caused by incorrect use or unfortunate circumstances. Therefore, the following list of

common fault symptoms is included.

The platter doesn't turn although the unit is switched on:

The unit is not connected to the mains power supply.

No mains at the socket.

Drive belt is not fitted or has slipped off.

No signal through one or other channel or both channels:

No signal contact from the cartridge to the internal tonearm wiring or from that to the arm lead or

from that to the phono box or between that and the amplifier. This could be due to a faulty plug,

broken wire or solder joint or simply loose plug/socket connection.

Phono input not selected at amplifier.

Amplifier is not switched on.

Amplifier or speakers are defective or muted.

No connection to the loudspeakers.

Strong hum on phono input:

No earth connection from cartridge or arm or arm cable to amplifier, or earth loop.

Distorted or inconsistent sound from one or both channels:

Record player is connected to wrong input of amplifier, or MM/MC switch incorrectly set.

Needle or cantilever damaged.

Wrong r.p.m., drive belt overstretched or dirty, platter bearing without oil, dirty or damaged.

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only when the problem cannot be resolved there should the

unit be sent to the responsible distributor in your country.

Guarantee repairs will only be affected if the unit is returned correctly packaged. For this reason we recommend

keeping the original packaging.

Never return a record player without making sure that is it safely disassembled and correctly packaged in the

original packaging according to the diagrams on the last page of this user guide. Please remove these parts and

pack them separately: lid, counterweight, anti-skating weight, platter and belt. Fit the cartridge protection cap.

Insert the transport lock for the tonearm prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not

adhering to these instructions

for use and/or by transportation without the original packaging. Modification or change to any part

of the product by unauthorized persons, release the manufacturer from any liability over and above

the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going to press

The manufac

turer reserves the right to make changes to

the technical specification without prior notice as deemed

necessary to uphold the ongoing process

of technical

development.

X2 B

Setup Guide

Getting started:

• Make sure to have enough space to unpack your turntable.

• Always unpack and set up in a clean environment.

• Please Do NOT throw away the packaging! If you need

service or want to return your product, please send it

in the original packaging including all inserts. In case of

damage due to alternative packaging your dealer cannot

guarantee a full refund.

• complete manual:

www.project-audio.com/en/product/x2-b

1 32

Unpack all items from accessory bag: Remove dust cover carton from the box. Lift the wrapped turntable out of the box.

a) b) c)

e) f)

a) Felt mat

E6WDQGDUGưDWEHOW(33/45 RPM) & round belt (78 RPM)

c) Adapter for 7“ singles / Allen key

d) Connect it Phono E cable

e) Gloves

f) Anti Skating Weight

Carefully remove the covering. 56

4 7

Unpack the counterweight and

power supply from the buttom inserts.

Unpack the platter. 3XWWKHưDWGULYHEHOWERQWKHSXOOH\

and sub-platter.

Large pulley for round belt (78 RPM)

If necessary, level the turntable by

adjusting the feet.

810

911

Put the platter on the turntable. The turntable should always be placed on

DưDWVXUIDFH&KHFNZLWKDVSLULWOHYHO

Put the counterweight in place. Carefully place the tonearm between

platter and armrest and lower the tonearm lift.

Put a record on the platter.

Remove the stylus protection cover.

12 14 1513

Remove tonearm twist tie.

Lower the tonearm with the lift.

16 19

Balance the tonearm by turning the counter-

weight forwards and backwards on the rod.

3OXJLQSRZHUVXSSO\DQG&RQQHFWLW(G

<HOORZFDEOHPDUNVWRWKHDPSOLƮHU

20 21 Unpack dust cover and install it. &RQQHFWWR\RXUKLƮV\VWHPDQG

have fun with music!

DVSLULWOHYHOFDQEHSXUFKDVHGVHSDUDWHO\

0°

Hold the counterweight and set the dial to

‘0‘ by ONLY turning the dial to the marker.

Turn the WHOLE counterweight

counterclockwise until the scale reads 23.

17 Put the loop of the Antiskating

weight (f) in the outer groove.

7XUQWKHPRWRURQRƬ>XQGHUWKHFKDVVLV@

Select your playback speed with the selector.

45/78

7UXH%DODQFHG&RQQHFWLW(>0LQL;5/&DEOH@DYDLODEOHVHSDUDWHO\

More information on the back of this setup paper.

X2 B Unleash the full potential with

a True Balanced Connection!

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further

advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.

Warranty repairs will only be aected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.

Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according to the

diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating weight and belt.

Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation without the

original packaging. Modication or change to any part of the product by unauthorized persons, release the manufacturer from any liability over and

above the lawful rights of the customer.

Warranty: Terms and Conditions

• A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.

• This warranty oer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which aects

your original warranty).

• Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty.

• A warranty is only valid for the original owner. It is not transferable.

• To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.

• Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.

• The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.

A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:

• Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear pads,

drive belts and cartridges.

• Damages caused by incorrect installation, connection or packing.

• Damages caused by any use other than the correct use described in the user manual, negligence, modications, or use of parts that are not

made or authorized by Pro-Ject Audio Systems.

• Damages caused by faulty or unsuitable ancillary equipment.

• Damages caused by accidents, lightning, water, re heat, war, public disturbances or any other cause beyond the reasonable control of

Pro-Ject Audio Systems and its appointed distributors.

• Products where the serial number has been altered, deleted, removed or made illegible.

• Repairs or modications that have been executed by an unauthorized person.

Commercial Use

Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This turntable is

intended for domestic use only. Using them for business applications are done so at your own risk.

Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information, pictures and gures were correct at the time of going to press. The manufacturer reserves the right to make changes to the techni-

cal specication without prior notice as deemed necessary to uphold the ongoing process of technical development.

Need help?

Feel free to contact us. We have experienced

partners all over the world. Find your dealer here:

www.project-audio.com/en/nd-a-dealer/

SG022

True Balanced Connection

Balanced audio connections are usually

known from the professional sector like

recording studios or live concerts. It is very

important to have a stable & interference

free connection, as these signals, espe-

cially microphone signales, will be highly

amplied. The same applies to the connec-

tion from your turntable to the phono pre-

amplier. The big advantage of a balanced

connection is its ability to remove picked

up noise and interferences.

Balanced connections use three wires for

one channel: ground, a hot and a cold wire.

The cold wire carries the inverted (reversed

in polarity) hot signal. At the receiving end

the cold signal is ipped and added toge-

ther. The trick happens here: If the cable

picks up any noise, the noise is added to

both signals. So, a positive interference is a

positive tick on the hot and on the cold sig-

nal. If you now ip one of them, the interfe-

rence is also inverted, so you get the same

interference once in a positive and once in

a negative direction. If you now add these

two signals, the noise will cancel out.

To take full advantage of the true balanced

connection your turntable should be equip-

ped with an MC cartridge.

True Balanced Connection

X2 B Phono Box S3 B

Connect it Phono E

Mini XLR/Mini XLR

Deutsch Italiano Español Português Français Svenska Pусский 日本語普通話 ىبرع

Vor dem Auspacken: Stellen Sie sicher,

dass genügend Platz zum Auspacken

Ihres Plattenspielers vorhanden ist.

Iniziamo: Assicurati di avere

abbastanza spazio per disimballare il

tuo giradischi

Para empezar: Asegúrese de que

dispone de suficiente espacio para

desembalar su giradiscos.

Inicio: Assegure que tem espaço

suficiente para desembalar o seu gira-

discos.

Pour commencer : Assurez-vous

d'avoir suffisamment d'espace pour

déballer votre platine.

Kom igång: Se till att ha tillräckligt

med utrymme för att packa upp din

skivspelare

Прежде чем начать: Убедитесь в

наличии свободного места для

распаковки проигрывателя

セットアップを始める前のご注意

開梱の際は周りに十分なスペースを

確保してください。

开始之前：

请准备足够的空间以备开箱后唱机和

配件的摆放

ءدب مادختسلاا

دكأت نم دوجو ةحاسم ةيفاك غيرفتل

صرقلا راودلا

Immer in einer sauberen Umgebung

auspacken und aufstellen.

Disimballare e installare sempre in un

ambiente pulito.

Desembale siempre el producto y

configúrelo en un entorno limpio.

Garanta sempre que o faz num

espaço limpo e amplo.

Toujours déballer et installer dans un

environnement propre.

Packa alltid upp och installera i en ren

miljö.

Настройку проигрывателя нужно

проводить на свободном пространстве

開梱やセットアップを行う時は綺麗

に掃除された場所で行ってください

。

请始终保证安装及使用本产品的环境

清洁

مق اًمئاد غيرفتلاب دادعلإاو يف ةئيب ةفيظن

Bitte werfen Sie die Verpackung NICHT

weg! Wenn Sie Ihre Garantie in

Anspruch nehmen oder Ihr Produkt

zurücksenden möchten, senden Sie

diese bitte in der Originalverpackung mit

allen Beilagen. Im Falle einer

Beschädigung in einer anderen

Verpackung kann Ihr Händler keine

vollständige Rückerstattung garantieren.

NON buttate via l'imballo! Se avete

bisogno di una riparazione, dovrete

inviare il prodotto nell'imballaggio

originale, utilizzando tutti gli inserti. Se

il giradischi si danneggia durante il

trasporto a causa di un imballaggio

sbagliato con la scatola originale, o se

usate un altro imballo, il vostro

rivenditore non può garantire la

riparazione in garanzia.

¡Por favor NO tire el embalaje! Si su

producto necesita una operación de

mantenimiento o usted quiere

devolverlo, le rogamos que lo envíe en

el embalaje original con todos los

componentes del mismo. En el caso de

que se produzcan daños como

consecuencia del uso de un embalaje

distinto, su distribuidor no podrá

garantizarle una reembolso completo.

Por favor não deite as caixas fora. Se

precisar de uma assistência técnica

ou pretender devolver o equipamento

deverá fazê-lo sempre na caixa

original devidadmente acondicionado.

No caso de qualquer dano ocorrido

com outra embalagem a loja/agente

não poderá assegurar a reparação em

garantia do dano ou a devolução total

do valor do equipamento.

Veuillez ne PAS jeter l'emballage ! Si

vous avez besoin d'un service ou si

vous voulez renvoyer votre produit,

veuillez l'envoyer dans l'emballage

original, avec tous les éléments. En

cas de détérioration dans un autre

emballage, votre revendeur ne peut

garantir un remboursement complet.

Vänligen kasta INTE förpackningen!

Om du behöver service eller vill

returnera din produkt, skicka den i

originalförpackningen inklusive alla

insatser. Vid skada då annan

förpackning använts kan din

återförsäljare inte garantera full

återbetalning.

Пожалуйста, не выбрасывайте упаковку!

Она может потребоваться в случае

возврата устройства, или выполнения

гарантийного обслуживания. Так же

сохраните все упаковочные элементы

для безопасной транспортировки

開梱後の箱や緩衝材を含むすべての

付属品は捨てずに保管されることを

お勧めいたします。お引越しや修理

等の発送や移動ではオリジナルのパ

ッケージをお使いになることでダメ

ージの可能性を最小限に抑えられま

す。

请务必保留产品包装及包装内的填充

物，以备将来可能的售后服务运输使

用，非原厂包装可能在运输中损坏您

的产品并造成不必要的损失

ًءاجر

مدع صلختلا نم ةوبعلا

اذإ تنك ةجاحب ىلإ

ةمدخ وأ بغرت يف عاجرإ ،كجتنم ىجريف هلاسرإ

يف ةوبعلا ةيلصلأا امب يف كلذ عيمج تاقحلملا

يف

ةلاح دوجو يأ فلت يف ةوبع ،ىرخأ لا نكمي

ليكولل صاخلا كب نامض دادرتسا لماك غلبملا

Vollständige Bedienungsanleitung:

www.project-audio.com/en/product/x2-

manuale completo: www.project-

audio.com/en/product/x2-b

manual de instrucciones completo:

www.project-audio.com/en/product/x2-

Manual completo: www.project-

audio.com/en/product/x2-b

Notice complète : www.project-

audio.com/en/product/x2-b

Fullständig bruksanvisning:

www.project-

audio.com/en/product/x2-b

полное руководство: www.project-

audio.com/en/product/x2-b

取扱説明書はこちら：www.project-

audio.com/en/product/x2-b

完整版本说明书请参见：www.project-

audio.com/en/product/x2-b

ليلدلا لماكلا

:www.project-

audio.com/en/product/x2-b

Packen Sie alle Artikel aus der

Zubehörtasche aus.

Tirate fuori dalla busta tutti gli

accessori

Desembale todos los componentes de

la bolsa de accesorios

Retire todos os items do saco dos

acessórios.

Déballez tous les éléments du sachet

d'accessoires.

Packa upp alla saker ur

tillbehörsväskan.

1Извлеките все аксессуары из упаковки 1

付属品の入った袋からすべての付属

品を取り出します。

1将所有配件从配件包中取出备用1مق غيرفتب عيمج رصانعلا نم ةبيقح تاقحلملا

a) Filzmatte a) Tappetino a) Esterilla a) Base em feltro para discos a) Feutrine a) Filtmatta a) Фетровый мат a) フェルトマット a) 毛毡唱片垫a) شرف دابل

b) Rundriemen für 78 RPM b) Cinghia per 78 giri b) Correa redonda para discos de 78 RPM b) Correia para 78 r.p.m. b) Courroie ronde pour 78 tr/m b) Rund drivrem för 78 varv b) Круглый пассик для скорости 78 об./мин b) 78回転用ベルト b) 78 转用圆形截面驱动皮带b) مازح يرئاد ةردقل

ةرود يف ةقيقدلا

Standard Flachriemen für 33/45 U/Min Cinghia standard per 33/45 giri

Correa plana estándar para discos de

33/45 RPM

Correia Standard para 33/45 r.p.m. Courroie standard pour 33/45 tr/m Standard platt drivrem för 33/45 varv

Плоский пассик для скорости 33 / 45

об. / мин

33/45回転用ベルト 33/45 转用扁平截面驱动皮带مازح حطسم يسايق ةردقل

33/45

ةرود يف ةقيقدلا

c) Inbusschlüssel c) Chiave Allen c) Llave Allen c) Chave Allen c) Clé allen c) Insexnyckel c) Ключ c) 6角レンチ c) 六角工具 c) حاتفم يسادس

(

نلآ

)

Adapter für 7“ Singles Adattatore per singoli da 7" (45 giri) Adaptador para singles de 7" Adaptador para singles 7" Centreur 45 tours Adapter för 7"-singlar Адаптер для 7-дюймовых пластинок シングル盤用アダプタ 7英寸单曲唱片适配器 لوحم ملافلأل ةدرفملا سايق

ةصوب

d) Connect it E Cinch Kabel d) Cavo RCA Connect it d) Cable Connect it E con conector RCA d) Connect It E - Cabo Phono RCA d) Câble RCA Connect-it E d) Connect it E RCA-kabel d) Кабель Connect It E d) 結線用RCAピンケーブル d) Connect it E RCA 信号线d) ليصوتلا لباكب

E RCA

e) Handschuhe e) Guanti e) Guantes e) Luvas e) Gants e) Handskar e) Перчатки e) 手袋 e) 手套 e) تازافق

f) Anti Skating Gewicht f) Peso per Anti Skating f) Peso del Anti-Skating f) Peso Anti-skating f) Poids anti-skating f) Antiskatingvikt f) Груз антискейтинга f) アンチスケーティングウェイト f) 抗侧滑机构配重坠f) نزو داضم قلحزتلل

Entfernen Sie den

Staubschutzhaubenkarton aus der

Verpackung.

Rimuovi il coperchio anti-polvere dalla

scatola

2Retire la cubierta protectora de la caja. 2Retire o cartão superior da caixa 2

Retirez le carton de protection anti-

poussière de la boîte.

Ta bort dammskyddets kartong från

lådan.

Извлеките пылезащитную крышку из

упаковки

ダストカバーを箱から取り出します

。

2移除防尘罩固定纸板2لزأ نوترك ءاطغلا يقاولا نم رابغلا نم قودنصلا

Nehmen Sie den verpackten

Plattenspieler aus der Verpackung.

Solleva dalla scatola il giradischi

avvolto dalla busta protettiva.

Retire el giradiscos empaquetado de la

caja.

3Retire o gira-discos de dentro da caixa 3Sortez la platine emballée de la boîte. 3

Lyft ut den inslagna skivspelaren ur

lådan.

3Извлеките проигрыватель из коробки 3

不織布袋に入っているプレーヤー本

体を箱から取り出します。

3取出纤维布包裹的唱机本体 3عفرا صرقلا راودلا فوفلملا جراخ قودنصلا

Entfernen Sie vorsichtig die Schutzhülle.

Geben Sie Acht: Den Tonarm mit

Sorgfalt zu behandeln!

Rimuovi con cura la busta di

protezione. Il braccio è fragile!

Retire cuidadosamente la protección

que lo recubre. ¡El brazo de lectura es

muy frágil!

Com cuidado retire a tampa de

protecção. O braço é frágil.

Retirez avec précaution le

revêtement de protection. Le bras de

lecture est fragile !

Ta försiktigt bort den skyddande

förpackningen. Tonarmen är ömtålig!

Осторожно распакуйте проигрыватель.

Тонарм хрупкий!

トーンアームに引っかからないよう

注意してプレーヤー本体を不織布袋

から取り出してください。

小心地移除纤维布保护套。注意：唱臂

为精密部件请勿施力

لزأ ءاطغ ةيامحلا ةيانعب

دومع لقن توصلا

فيعض

5Packen Sie den Plattenteller aus. 5Disimballa il piatto girevole. 5Desembale el plato. 5Desembrulhe o prato 5Déballez le plateau. 5Packa upp skivtallriken. 5Распакуйте опорный диск 5プラッターを取り出します。 5取出主转盘 5كف ةناوطسلأا

6Packen Sie das Netzteil aus. 6Disimballa l'alimentatore 6Desembale la fuente de alimentación. 6Desembrulhe a fonte de alimentação 6Déballez l'alimentation électrique. 6Packa upp strömförsörjningen. 6Распакуйте источник питания 6ACアダプタを取り出します。 6取出电源适配器 6كف ردصم دوزتلا ةقاطلاب

Packen Sie das Gegengewicht aus. Disimballa il contrappeso Desembale el contrapeso. Desembrulhe o contrapeso Déballez le contrepoids. Packa upp motvikten. Распакуйте противовес

カウンターウェイトを取り出します

。

取出唱臂配重 كف لقث ةنزاوملا

Legen Sie den Antriebsriemen auf den

Pulley und den Sub-Teller.

Inserisci la cinghia sulla puleggia e sul

sotto-piatto.

Coloque la correa entre la polea y el

plato inferior (sub-platter).

Coloque a correia na pulia e à volta do

sub-prato

Placez la courroie d'entraînement sur

la poulie et le sous-plateau.

Montera drivremmen på trissan och

under-tallriken.

Наденьте пассик на шкив двигателя и

суб-диск

ドライブベルトをプーリーとサブプ

ラッターに掛けます。

将驱动皮带安装到下层转盘和驱动轮

上

7عض مازح ةدايقلا ىلع ةركبلا صرقلاو يعرفلا

Legen Sie den Plattenteller auf den

Plattenspieler.

8Sistema il piatto sul giradischi 8Coloque el plato en el giradiscos. 8Coloque o prato no gira-discos 8Posez le plateau sur la platine. 8Montera skivtallriken på skivspelaren. 8

Установите опорный диск на

проигрыватель

プラッターを取り出します。をサブ

プラッターの上に取り付けます。

8将主转盘安装到唱机本体 8عض ةناوطسلأا ىلع صرقلا راودلا

Der Plattenspieler sollte immer auf einer

ebenen Fläche aufgestellt werden.

Überprüfen Sie dies mit einer

Wasserwaage.

Il giradischi deve essere sempre

posizionato su una superficie piana.

Controllare con una livella.

El giradioscos debería ser colocado

siempre sobre una superficie plana.

Verifíquelo con un nivelador de burbuja.

O gira-discos deve ser sempre

colocado sobre uma superficie

nivelada. Se possivel verifique com um

nível de bolha.

La platine doit toujours être placée

sur une surface plane. Vérifiez avec

un niveau à bulle.

Skivspelaren skall alltid placeras på

en plan yta. Kontrollera med ett

vattenpass.

Проигрыватель должен быть

установлен строго горизонтально

(проверьте это с помощью спиртового

уровня)

レコードプレーヤーは水平な場所へ

設置します。設置場所が水平である

か水準器などで確認することをお勧

めします。

唱机应当在水平平面上使用，请使用

水平仪确认

بجي اًمئاد عضو صرقلا راودلا ىلع حطس وتسم

ققحت عم نازيم ةيوستلا

Richten Sie den Plattenspieler bei

Bedarf durch Einstellen der Füße aus.

Se necessario livella il giradischi

agendo sui piedini di appoggio

En caso de que sea necesario, nivele el

giradiscos ajustando los pies.

Se necessário coloque o gira-discos a

nível ajustando os pés

Si nécessaire, mettez la platine à

niveau en réglant les pieds.

Vid behov, justera fötterna för att få

skivspelaren i jämnhöjd.

При необходимости отрегулируйте

положение проигрывателя с помощью

регулируемых опор

もしプレーヤーが水平でない場合、

脚の高低を調整しながら水平を取っ

てください。

如有必要，旋转唱机支脚进行升降，将

唱机调到水平

اذإ مزل ،رملأا مق طبضب ىوتسم صرقلا راودلا نع

قيرط طبض مدقلا

11 Entfernen Sie die Tonarmsicherung. 11 Rimuovi il filo di blocco del braccio 11

Retire el lazo que sujeta el brazo de

lectura.

Remova o arame de segurança do

braço

Retirez le fil de fer plastifié du bras de

lecture.

11 Ta bort tonarmens transportlås. 11

Снимите транспортировочный

фиксатор с тонарма

トーンアーム保護用に取り付けてあ

る結束タイを外してください。

11 移除唱臂固定带11 لزأ طبرملا يولملا دومعل لقن توصلا

12 Setzen Sie das Gegengewicht auf. 12 Metti il contrappeso in sede 12 Ponga el contrapeso en su lugar. 12 Coloque o contrapeso 12 Mettez le contrepoids en place. 12 Montera motvikten. 12 Установите противовес на место 12

トーンアームの後部からカウンター

ウェイトを取り付けてください。

12 将唱臂配重安装到位 12 عض لقث ة نزاوملا يف هناكم

13 Entfernen Sie den Nadelschutz. 13 Rimuovi il copritestina 13 Retire la cubierta protectora de la aguja. 13 Retire a tampa protectora da agulha 13 Retirez le cache-cellule. 13 Ta bort nålskyddet. 13

Снимите защитный колпачок иглы

картриджа

13 針先保護カバーを外してください。 13 取下唱针保护罩13 لزأ ءاطغ ةيامح ةربلإا

14 Legen Sie eine Schallplatte auf. 14 Metti un disco sul piatto 14 Ponga un disco en el plato. 14 Coloque o disco sobre o prato 14 Mettez un disque sur le plateau. 14 Lägg en skiva på skivtallriken. 14 Установите пластинку на опорный диск 14

プラッターの上にレコードを置いて

ください。

14 将唱片放在主转盘上14 عض ةناوطسأ ةيفارغونوف ىلع صرقلا

Legen Sie den Tonarm zwischen

Plattenteller und Armlehne. Senken Sie

den Tonarm mit dem Lift ab.

Posiziona il braccio tra il piatto e il

sostegno. Abbassa il braccio con il

sollevatore.

Coloque el brazo entre el plato y el

reposabrazos. Baje el brazo con el

elevador.

Coloque o braço entre o prato e o

apoio de descanso. Baixe o braço

com a alavanca do elevador

Placez le bras de lecture entre le

plateau et le support. Abaissez le

bras de lecture à l'aide de la manette.

Placera tonarmen mellan skivtallrik

och armstöd. Sänk tonarmen med

lyften.

Установите тонарм между опорным

диском держателем тонарма и опустите

его при помощи подъемника

トーンアームをアームレストから外

しプラッターとの間に移動します。

将唱臂放在唱臂托架和主转盘之间

使用唱臂升降杆放下唱臂

عض دومع لقن توصلا نيب صرقلا دنسمو عارذلا

ضفخا دومع لقن توصلا عم دعصملا

Balancieren Sie den Tonarm so, dass er

gerade schwebt, indem Sie das

Gegengewicht vorwärts und rückwärts

drehen.

Bilancia il braccio in modo che

rimanga in piano girando il

contrappeso avanti e indietro sul suo

asse

Equilibre el brazo de tal modo que esté

nivelado girando el cotrapeso hacia

delante y hacia atrás a lo largo del

mismo.

Estabilize o braço na horizontal

rodando o contrapeso no veio para a

frente e para trás no veio do braço

Équilibrez le bras de lecture pour qu'il

reste à niveau en faisant tourner le

contrepoids d'avant en arrière sur

l'axe.

Balansera tonarmen så att den håller

sig i plant läge genom att vrida

motvikten medurs och moturs.

Сбалансируйте тонарм в

горизонтальном положении,

поворачивая противовес по или против

часовой стрелки

カウンターウェイトを前後に動かし

トーンアームが水平に浮く状態にし

ます。

旋转唱臂配重，通过配重前后移动使

唱臂悬停于水平位置并悬停

مق نزاوتب دومع لقن توصلا ثيحب لظي اًيوتسم

نع قيرط ريودت لقثلا نزاوملا ماملأل فلخللو ىلع

بيضقلا

Drehen Sie das vordere Einstellrad des

Gegengewichts (nicht das gesamte

Gewicht( so, dass die „0“ mit der

Markierung auf der Rückseite des

Tonarms übereinstimmt.

Girate solo il collare anteriore del

contrappeso (non tutto il

contrappeso) in modo che lo '0' sia in

linea con il marcatore sul braccio.

Gire el dial frontal del contrapeso (no la

totalidad del mismo) de tal modo que

"0" esté alineado con el indicador que

hay en la zona posterior del brazo.

Rode apenas o anel frontal do

contrapeso de forma a colocar o "0"

em linha com a marca do extremo do

braço

Tournez la molette avant du

contrepoids (pas tout le poids) de

sorte que le '0' soit aligné avec le

repère à l'arrière du bras de lecture.

Vrid motviktens främre del (inte hela

vikten) så att "0" är i linje med

markeringen på tonarmen.

Установите переднее кольцо (не весь

груз) противовеса в положение 0

согласно маркеру на задней части

тонарма

アームが水平にバランスがところで

ウェイト前部の目盛ダイヤルのみを

動かし０が真上になるように合わせ

てください。

保持唱臂配重不移动，仅旋转唱臂配

重上的标尺，将“0”对准唱臂上的白色

标记

ردأ صرقلا يماملأا لقثل ةنزاوملا

(

سيلو نزولا

لماكلاب

)

ثيحب ىشامتي

"0 "

عم ةملاعلا ةدوجوملا يف

ءزجلا يفلخلا نم دومع لقن توصلا

Drehen Sie das gesamte Gegengewicht

gegen den Uhrzeigersinn bis die Skala

23 anzeigt.

Ruotare l'intero contrappeso in senso

antiorario fino a che la scala indichi

23.

Gire el contrapeso en sentido

antihorario hasta que la escala muestre

23.

Rode todo o contrapeso no sentido

contrário aos ponteiros do relógio até

à escala 23

Tournez l'ensemble du contrepoids

dans le sens inverse des aiguilles

d'une montre jusqu'à ce que l'échelle

indique 23.

Vrid hela motvikten moturs tills vågen

visar 23.

Поверните весь противовес против

часовой стрелку до метки шкалы 23

ウェイト全体を時計方向にゆっくり

回し目盛23の位置に合わせてくださ

い。

逆时针旋转唱臂配重直到唱臂标记对

准标尺上的 23

ردأ لقث ة نزاوملا لماكلاب سكع هاجتا براقع

ةعاسلا ىتح أرقي سايقملا

23.

Legen Sie die Schlaufe des Anti-

Skating-Gewichts (f) in die äußere Kerbe

am Tonarmpfosten.

Mettere l'anello del peso anti-

pattinaggio (f) nella tacca esterna sul

perno del braccio.

Coloque el bucle de la pesa antipatinaje

(f) en la muesca exterior del poste del

brazo fonocaptor.

Coloque o laço do Peso Anti

Patinação (f) no entalhe externo do

poste do braço.

Placez la boucle du poids

antipatinage (f) dans l'encoche

extérieure du montant du bras de

lecture.

Sätt öglan på Anti Skating Weight (f) i

den yttre skåran på tonearmstolpen.

Поместите петлю

противосквознякового груза (f) во

внешний паз на стойке тонарма.

アンチスケートウェイト（f）のルー

プをトーンアームポストの外側のノ

ッチに入れます。

将防滑配重 (f)

的环放在唱臂柱的外槽口中。

عض ةقلح نزولا داضملا جلزتلل

(f)

يف قشلا

يجراخلا ىلع دومع لقن توصلا

Netzteil & Kabel einstecken. Gelbe

Kabelmarkierungen verstärkerseitig.

Inserire l'alimentatore e collegare il

giradischi. Il collare giallo segna il lato

dell'amplificatore.

Conecte la fuente de alimentación y el

cable Connect it E . Las marcas en

amarillo indican el amplificador.

Ligue a fonte de alimentação ao gira-

discos e na tomada. E Ligue o cabo

Connect It E - o extremo com a marca

Amarela liga ao amplificador.

Branchez l'alimentation et le Connect

it E . Marques de câble jaunes vers

l'amplificateur.

Anslut strömförsörjningen och

Connect it E . Gul kabelmärkning till

förstärkaren.

Подключите источник питания и кабель

Connect It E желтой маркировкой к

усилителю/фонокорректору

ACアダプタのプラグを後面の端子に

差し込みます。フォノケーブルを取

り付けます（黄色い印の方がアンプ

川となります）

连接电源适配器和 Connect it E

信号线黄色标记端连放大器

مق ليصوتب ردصم ةقاطلا هليصوتو

E .

ريشي لبكلا

رفصلأا ىلإ ربكم توصلا

True Balanced Connect it E [Mini-XRL-

Kabel] separat erhältlich. Weitere

Informationen auf der Rückseite des

Setup Guides.

True Balanced Connect it E [Cavo

Mini-XRL] disponibile separatamente.

Maggiori informazioni sul retro della

guida all'installazione.

True Balanced Connect it E [Mini-XRL-

Cable] disponible por separado. Más

información en la parte posterior de la

guía de configuración.

True Balanced Conecte-o E [Mini-XRL-

Cable] disponível separadamente.

Mais informações no verso do guia de

configuração.

True Balanced Connect it E [câble

mini-XRL] disponible séparément.

Plus d'informations au dos du guide

d'installation.

True Balanced Connect it E [Mini-

XRL-Cable] finns separat. Mer

information finns på baksidan av

installationsguiden.

True Balanced Connect it E [Mini-XRL-

Cable] доступен отдельно. Более

подробная информация находится на

обратной стороне руководства по

установке.

True Balanced Connect itE[Mini-XRL-

Cable]は別売りです。セットアップガ

イドの裏側に詳細があります。

True Balanced Connect it E [Mini-

XRL-Cable]

可单独购买。有关设置指南背面的更

多信息。

رفوتي

True Balanced Connect it E [Mini-

XRL-Cable]

لكشب لصفنم

ديزم نم تامولعملا

يف ءزجلا يفلخلا نم ليلد دادعلإا

Packen Sie die Staubschutzhülle aus

und setzen Sie sie auf den

Plattenspieler.

Disimballare il coperchio antipolvere

e metterlo sul giradischi.

Desembale la Cubierta Protectora y

colóquela en el giradiscos.

Desembrulhe a tampa de proteção e

coloque-a no gira-discos

Déballez le capot et placez-le sur la

platine.

Packa upp dammskyddet och sätt

det på skivspelaren.

Распакуйте пылезащитную крышку и

установите ее на проигрыватель

ダストカバーを保護用の不織布袋か

ら取り出しプレーヤー本体に取り付

けます。

21 取出防尘罩并安装到唱机本体 21

كف ءاطغ ةيامحلا نم رابغلا هعضو ىلع صرقلا

راودلا

Schalten Sie den Motor mit dem

Schalter vorne links unter dem Chassis

ein. Wählen Sie die Geschwindigkeit,

indem Sie die Taste drücken.

Accendi il motore con l'interruttore

situato nella parte anteriore sinistra

sotto il telaio. Selezionare la velocità

premendo il bottone.

Ponga en marcha el motor con el

interruptor situado debajo de la zona

frontal izquierda del chasis. Seleccione

la velocidad pulsando el botón.

Ligue o motor no interruptor colocado

na parte inferior da base do gira-

discos no canto frontal esquerdo.

Selecione a velocidade premindo o

botão.

Allumez le moteur avec l'interrupteur

situé à l'avant gauche sous le

châssis. Sélectionnez la vitesse en

appuyant sur le bouton.

Starta motorn på strömbrytaren som

är placerad framtill på vänster sida

under chassit. Välj hastighet genom

att trycka på knappen.

Включите двигатель с помощью

переключателя, находящегося слева

спереди под шасси. Установите

требуемую скорость вращения диска с

помощью кнопки.

本体底面（左下）にある電源スイッ

チを入れるとモーターが回転します

。回転数はスピード切替ボタンを押

して行います。

使用唱机左侧的开关打开马达，短按

可打开或选择转速，长按可停止马达

مق ليغشتب روتوملا مادختساب حاتفملا دوجوملا يف

ءزجلا يماملأا رسيلأا لفسأ لكيه زاهجلا

ددح

ةعرسلا طغضلاب ىلع رزلا

Verbinden Sie den Plattenspieler mit

Ihrer HiFi-Anlage und genießen Sie Ihre

Musik!

Collega il giradischi al tuo sistema hifi

e goditi la tua musica!

¡Conecte su equipo de Hi-Fi y disfrute

con su música favorita!

Ligue o gira-discos ao sistema Hi-Fi e

desfrute da sua música!

Connectez-vous à votre système hifi

et profitez de votre musique !

Anslut till ditt hifi-system och njut av

din musik!

Подключите проигрыватель к вашей

аудиосистеме и наслаждайетсь

музыкой!

フォノケーブルをアンプのPHONO端

子に接続して、音楽を楽しんでくだ

さい。

连接您的Hi-

Fi系统，享受音乐的乐趣！

لصتا ماظنب ياه ياف صاخلا كب عتمتساو

ىقيسوملاب يتلا اهلضفت

X2 B SGT022

Pro-Ject Audio System X2B Turntable User manual

Brand: Pro-Ject Audio System

Model: X2B Turntable

Type: User manual

This manual is also suitable for

Pro-Ject Audio System X2B Turntable

Download PDF

report

in other languages

italiano: Pro-Ject Audio System X2B Turntable Manuale utente
français: Pro-Ject Audio System X2B Turntable Manuel utilisateur
日本語: Pro-Ject Audio System X2B Turntable ユーザーマニュアル

Pro-Ject Audio System X2B Turntable User manual

This manual is also suitable for

Pro-Ject Audio System X2B Turntable User manual

in other languages

Related papers

Other documents