Shenzhen Lazy Cat Communication Technology UUMAO10W Invisible Fast Wireless Charging User manual

Brand: Shenzhen Lazy Cat Communication Technology

Model: UUMAO10W Invisible Fast Wireless Charging

Type: User manual

Shenzhen Lazy Cat Communication Technology UUMAO10W Invisible Fast Wireless Charging offers a seamless wireless charging experience for your Qi-enabled devices. With its ultra-thin design, it can be discreetly installed under non-metallic tables, making it ideal for use in offices, homes, and public spaces. The wireless charging transmitter supports fast charging up to 10W for compatible devices, ensuring quick and efficient power replenishment. Installation is simple and non-invasive, using double-sided tape or optional mounting screws.

Uumao10W Invisible Fast Wireless Charging

1,Product Description:

This product is a wireless charging transmitter for standard QI. The minimum distance is

5MM.

The maximum distance is 30MM.

2,Scenes To Be Used:

Suitable for installation under thick desktops. Suitable for marble, wood, glass and other

non-metallic non-conductive tables.

3,Charging Parameters:

TYPE-C input: 12V (please use the donated12V3A adapter)

Wireless output power: 10W/7.5W/5W, USB wired output power: 5V2A

Effective charging distance: 5MM-30MM

4,How To Install:

No drilling or tools required, you can peel off the double-sided tape on the wireless

charging

surface and quickly install and paste it on the lower surface of the table. Will not cause

permanent damage to your desktop or counter-(optional mounting screws also included).

After installing the wireless charger, use the signal detector to find the signal.

5,Wireless Charging Signal Detector:

When the wireless charging signal is detected,The lamp beads will light up.The brightest

place is where the signal is strongest.

6,Safety Protection:

It has safety protection functions such as overcharge, overcurrent, and overtemperature.

7,Warn:

1. Do not charge at a distance less than 5MM. If the receiving distance is less than 5MM,

the

charging and receiving equipment may be damaged.

2. Do not charge at a distance greater than 30MM. More than 30MM. It may cause Apple

12 to fail to charge. Or the phone case is too thick to charge.

3. Do not use metal or other conductors that are impermeable to electromagnetic waves.

4. Do not charge the product near or near a heat source;

5. Do not pour water or other liquids into the interface of this product, causing damage to

the product; Do not allow children or animals to chew or swallow the device.

6. Do not disassemble, modify or repair the equipment.

7. Do not place magnetic stripe cards (including credit cards, phone cards, passbooks and

registration cards) near the charging equipment. In order to avoid the generated magnetic

field from damaging the magnetic stripe card and damaging the device.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is Subject To the

following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modifications not explicitly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

· Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. During the operation of device a distance of 15 cm

surrounding the device and 20 cm above the top surface of the device must be

respected.

Shenzhen Lazy Cat Communication Technology UUMAO10W Invisible Fast Wireless Charging User manual

Shenzhen Lazy Cat Communication Technology UUMAO10W Invisible Fast Wireless Charging User manual

Shenzhen Lazy Cat Communication Technology UUMAO10W Invisible Fast Wireless Charging User manual

Related papers

Other documents