Preparation Before Use
Basic Operations
Recorder
USB Operations
Function Buttons
Appendix
CE220
Owner’s Manual
Thank you for purchasing this Kawai CE220 digital piano.
This owner’s manual contains important information regarding the usage and
operation of the CE220 digital piano.
Please read all sections carefully, keeping this manual handy for future reference.
3
AboutthisOwner’sManual
Before attempting to play the CE220 digital piano, please read the Preparation Before Use section from page 10 of this owner’s
manual. This section explains the name and function of each part, how to connect the power cable, and how to turn on the power.
The Basic Operations section (page 14) provides an overview of the instrument’s most commonly used functions, such as selecting
and combining sounds, and splitting the keyboard into separate sections. This chapter also explains how to apply reverb and eects
to sounds, and how the voicing controls can be used to adjust the character of the piano sounds.
The Recorder section (page 26) provides instructions on how to record and play back pieces stored in the instrument’s internal
memory, while the USB Functions section (page 30) explains how recorded performances can be loaded from and saved to USB
ash memory devices.
The Function Buttons chapter (page 36) details the CE220 digital piano’s various keyboard, sound, and pedal settings, in addition to
explaining the instrument’s useful MIDI capabilities.
Finally, the Appendix section (page 60) includes lists for all internal sounds, songs, and drum rhythms, assembly instructions,
troubleshooting recommendations, MIDI reference information, and full specication details.
CE220 Feature Highlights
AWA Grand Pro II wooden-key keyboard action
The CE220 digital piano utilises the critically acclaimed AWA Grand Pro II keyboard action, employing longer, real wooden
keys for an unsurpassed acoustic piano feel. Authentic key balance points, action movement and contact placements
combine with proper hammer grading and bass key counter-weights to replicate the exceptional touch of the world-
renowned Kawai EX Concert Grand Piano. Such meticulous attention to detail provides incredible stability during fortissimo
passages, while preserving delicate pianissimo control, to satisfy the demands of even the most discerning pianist.
Progressive Harmonic Imaging™ (PHI) sound technology, 88-key piano sampling
The CE220 digital piano captures the beautiful sound of Kawai’s highly acclaimed hand-built concert grand piano, with
all 88 keys of this exceptional instrument meticulously recorded, analysed and faithfully reproduced using proprietary
Progressive Harmonic Imaging™ technology. This unique process accurately recreates the broad dynamic range of the
original grand piano, aording pianists an extraordinary level of expressiveness ranging from the softest pianissimo to the
strongest, boldest fortissimo.
Additional reverberation eects that simulate the acoustic environment of a recital room, stage, or concert hall are also
applied, resulting in a rich, vibrant piano tone that delivers breathtaking realism and authenticity, while the unique Voicing
function allows players to adjust the tonal character of the piano beneath their ngertips.
Excellent selection of additional instrument sounds
Supplementing the realistic acoustic piano voices, the CE220 digital piano also features an excellent selection of additional
instrument sounds, ranging from electric pianos and drawbar and church organs, to strings, brass, and woodwind
instruments, inviting musicians to add greater variety to their performances.
Furthermore, the Dual playing mode also allows two dierent sounds, such as grand piano and strings, to be layered
together, while the Split and Four Hands modes divide the keyboard into two independent sections. The volume balances
for each playing mode can also be adjusted quickly and easily using the real-time balance slider.
Wide range of connectivity options
The CE220 digital piano features a variety of standard connectivity options, with LINE-level audio jacks that allow the
instrument to be enjoyed in larger settings such as churches and schools. Standard MIDI and USB to Host connectors
provide exibility when using computers and other audio devices, while the USB to Device port allows musicians to save
recorded performances to USB ash memory devices. It is even possible to playback Standard MIDI File (SMF) songs stored
on USB memory directly, without the need for additional equipment.
Preface
4
Important Safety Instructions
denotes that care should be taken.
The example instructs the user to take care not to allow ngers to be trapped.
denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.
denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.
Examples of Picture Symbols
Read all the instructions before using the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sucient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the leterature
accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
SAVE THESE INSTRUCTIONS
$ #3'$2$(-2314"3(.-2
$$/3'$2$(-2314"3(.-2
$$# ++6 1-(-&2
.++.6 ++(-2314"3(.-2
.-.342$3'(2 // 1 342-$ 16 3$1
+$ -.-+86(3'#18"+.3'
.-.3!+."* -85$-3(+ 3(.-./$-(-&2-23 ++(-
"".1# -"$6(3'3'$, -4% "341$1;2(-2314"3(.-2
.-.3(-23 ++-$ 1 -8'$ 32.41"$224"' 21 #( 3.12
'$ 31$&(23$1223.5$2.1.3'$1 // 1 342(-"+4#(-&
,/+(:$123' 3/1.#4"$'$ 3
.-.3#$%$ 33'$2 %$38/41/.2$.%3'$/.+ 1(9$#.1
&1.4-#(-&38/$/+4&/.+ 1(9$#/+4&' 236.
!+ #$26(3'.-$6(#$13' -3'$.3'$1&1.4-#(-&
38/$/+4&' 236.!+ #$2 -# 3'(1#&1.4-#(-&
/1.-&'$6(#$!+ #$.13'$3'(1#/1.-&2 1$
/1.5(#$#%.18.412 %$38%3'$/1.5(#$#/+4&#.$2
-.3:3(-3.8.41.43+$3".-24+3 -$+$"31("( -%.1
1$/+ "$,$-3.%3'$.!2.+$3$.43+$3
1.3$"33'$/.6$1".1#%1.,!$(-&6 +*$#.-.1
/(-"'$#/ 13("4+ 1+8 3/+4&2".-5$-($-"$
1$"$/3 "+$2 -#3'$/.(-36'$1$3'$8$7(3%1.,3'$
// 1 342
-+842$ 33 "',$-32 ""$22.1($22/$"(:$#!83'$
, -4% "341$1
2$.-+86(3'3'$" 1323 -#31(/.#!1 "*$3.13 !+$
2/$"(:$#!83'$, -4% "341$1.1
2.+#6(3'3'$ // 1 342'$- " 13(242$#
42$" 43(.-6'$-,.5(-&3'$" 13 // 1 342
".,!(- 3(.-3. 5.(#(-)418%1.,3(/.5$1
-/+4&3'(2 // 1 342#41(-&+(&'3-(-&23.1,2.1
6'$-4-42$#%.1+.-&/$1(.#2.%3(,$
$%$1 ++2$15("(-&3.04 +(:$#2$15("$/$12.--$+
$15("(-&(21$04(1$#6'$-3'$ // 1 342' 2!$$-
# , &$#(- -86 824"' 2/.6$124//+8".1#.1
/+4&(2# , &$#+(04(#' 2!$$-2/(++$#.1.!)$"3
' 5$% ++$-(-3.3'$ // 1 3423'$ // 1 342' 2
!$$-$7/.2$#3.1 (-.1,.(2341$#.$2-.3./$1 3$
-.1, ++8.1' 2!$$-#1.//$#
5
WARNING
Indicates a potential hazard that could result in death or
serious injury if the product is handled incorrectly.
This product shall be near the AC outlet and the power cord plug in a position so that it can readily be
disconnected in an emergency because electricity is always charging while the plug is in the AC outlet
even in a power switch o condition.
This product may be equipped with a polarized line plug (one blade wider
than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
Failure to do so may cause re in case of
lightning.
Failure to do so may over-heat the product,
resulting in re.
The product is not completely disconnected from the
power supply even when the power switch is turned
o. If the product will not be used for a long time,
unplug the AC power cord from the AC outlet.
When disconnecting the AC power cord's
plug, always hold the plug
and pull it to remove it.
Pulling the AC power cord itself may damage
the cord, causing a re, electric shock or
short-circuit.
Do not disassemble, repair or modify
the product.
Doing so may result in product breakdown, electric
shock or short-circuit.
When using the headphones, do not
listen for long periods of
time at high volume levels.
Doing so may result in hearing problems.
The chair must be used properly (it must be
used only when playing the product).
Do not play with it or stand on it.
Only one person is allowed to sit on it.
Do not sit on it when opening the lid.
Re-tighten the bolts occasionally.
Doing so may cause the chair to fall over or your
ngers to be trapped, resulting in injury.
Do not insert or disconnect the power
cord plug with wet hands.
Doing so may cause electric shock.
The product should be connected to
an AC outlet of the specied voltage.
If you are going to use an AC power cord,
make sure that its has the correct plug shape
and conforms to the specied power voltage.
Failure to do so may result in re.
120V 240V230V
Doing so may cause the product to fall over,
resulting in injury.
Do not lean against the keyboard.
Entry of water, needles or hair pins may result
in breakdown or short-circuit.
The product shall not be exposed to dripping or
splashing. No objects lled with liquids, such as
vases, shall be placed on the product.
Take care not to allow any foreign
matter to enter the product.
WARNING - When using electric products, basic precautions should always be followed, including the following.
6
Doing so may result in discoloration or deformation
of the product.
When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.
Do not wipe the product with benzene
or thinner.
Failure to do so may damage them, resulting in
re, electric shock or short-circuit.
When connecting the AC power cord
and other cords, take care
not to get them tangled.
CAUTION
Indicates a potential hazard that could result in injury or
damage to the product or other property if the product
is handled incorrectly.
The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a
minimum distance of 5cm around the product for sucient ventilation.
Failure to do so may cause breakdown of this
product and other devices.
Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.
OFF
Doing so may cause the product to generate
noise.
If the product generates noise, move the
product suciently away from the electrical
appliance or connect it to another AC outlet.
Do not place the product near electrical
appliances such as TVs and radios.
Failure to do so may over-heat the product,
resulting in re.
Ensure that the ventilation is not
impeded by covering the ventilation
openings with items, such as newspaper,
table-cloths, curtains, etc.
Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.
Do not stand on the product or exert
excessive force.
Please lift up the product when moving it.
Please note that the product is heavy and must
be carried by more than two persons.
Dropping the product may result in breakdown.
Do not drag the product on the oor.
Take care not to drop the product.
Closing it roughly may trap your ngers,
resulting in injury.
When you close the keyboard cover,
close it gently.
Using the product in such areas may result in
product breakdown.
Use the product only in moderate climates (not
in tropical climates).
Do not use the product in the following areas.
Areas, such as those near windows, where the product is
exposed to direct sunlight
Extremely hot areas, such as near a heater
Extremely cold areas, such as outside
Extremely humid areas
Areas where a large amount of sand or dust is present
Areas where the product is exposed to excessive
vibrations
Doing so may cause the illumination to fall over,
resulting in re.
Do not place naked ame, such as lighted
candles on the product.
7
+.+
%,*
/
./.-+*.
.+
$'
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then
contact the shop from which the product was purchased.
)!%$
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
$!%$
Pour éviter les chocs électriques, introduire la lame la plus large de la che dans la borne correspondante de la prise et
pousser jusqu'au fond.
*.*
If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it
separately by taking it to an appropriate collection point.
You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative
eects on the environment and human health which could otherwise arise due to inappropriate waste handling.
For further details, please contact your local authority.
(European Union only)
!*)"
!#&%'$
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Do not plug either terminal of the power cord to the the ground od AC outlet on the wall.
'!*'+
This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference Regulations,
C.R.C., c. 1374.
!*.)(
)!%$ Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
$% This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The nameplate label is located on
the
underside of the instrument, as
indicated below.
Declaration of Conformity
Products : Electronic Piano
Model Number : CE220
Responsible Party Name : Kawai America Corporation
Address : 2055 East University Drive Rancho
Dominguez, CA 90220
Telephone 310-631-1771
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This applies only to products distributed by Kawai America Corporation.
Nameplate
8
9
Preface ................................................3
Important Safety Instructions .....................4
Table of Contents ...................................9
Preparation Before Use
Part Names and Functions ........................10
Setting Up the Piano ..............................12
Using the Pedals ...................................13
Basic Operations
Selecting Sounds ...................................14
Demo Songs ........................................15
Piano Music Pieces .................................16
Dual Mode ..........................................17
Split Mode ..........................................18
Four Hands Mode ..................................19
Reverb ...............................................20
Eects ...............................................21
Voicing ..............................................22
Transpose ...........................................23
Metronome / Drum Rhythms .....................24
Recorder
Song Recorder (Internal memory) ..................26
1. Recording a song ...............................26
2. Playing back a song ............................28
3. Erasing a part/song .............................29
USB Functions
USB Functions ......................................30
1. USB Play ........................................30
2. USB Load .......................................32
3. USB Save ........................................ 33
4. USB Delete ...................................... 34
5. USB Format .....................................35
Function Buttons
Keyboard and Sound Settings ...................36
1. Touch ...........................................37
2. Brilliance ........................................ 39
3. Tuning ..........................................40
4. Damper Resonance .............................41
5. String Resonance ...............................42
6. Temperament ..................................43
7. Lower Octave Shift ..............................45
8. Lower Pedal On/O .............................46
9. Layer Octave Shift ..............................47
10. Layer Dynamics ...............................48
11. Damper Hold On/O ..........................49
MIDI Functions and Settings .....................50
MIDI Overview ....................................50
1. MIDI Channel ................................... 51
2. Send Program Change Number ................52
3. Local Control On/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4. Transmit Program Change On/O ..............54
5. Multi-Timbral Mode On/O. . . . . . . . . . . . . . . . . . . . . 55
6. Channel Mute On/O ...........................56
USB MIDI (USB to Host Connector) ...................57
User Memory .......................................58
Appendix
Assembly Instructions .............................60
Connecting to Other Devices .....................62
Demo and Piano Music Song Lists ...............64
Drum Rhythm List ..................................66
Specications .......................................67
Program Change Number List ....................68
MIDI Exclusive Data Format ......................69
MIDI Implementation Chart ......................70
Function Button Assignments ...................71
TableofContents
10
Preparation Before Use
Part Names and Functions
r
s
t u v w
b c d e fa
i j k mg h n o p ql
11
Preparation Before Use
a MASTERVOLUMEslider
This slider controls the master volume level of the instrument’s
built-in speakers or headphones, if connected.
b DEMO button
This button is used to start/stop playback of the instrument’s
built-in Demonstration songs.
c PIANO MUSIC button
This button is used to start/stop playback of the instrument’s
built-in Piano Music songs.
d VOICING button
This button is used to select the tonal character of the acoustic
piano sounds.
e SOUND SELECTION buttons
These buttons are used to select the sound(s) that will be heard
when playing the instrument’s keyboard. Multiple sounds
are assigned to each category button, and can be selected by
pressing the same button repeatedly.
These buttons are also used to select the song and part of the
internal recorder.
f LED display
The LED display provides important information relating to
the currently selected function and various other values.
* A protective plastic lm is attached to the display during production.
Please remove this lm before attempting to play the instrument.
g VALUE buttons
These buttons are used to adjust the metronome/style tempo,
and other values shown in the LCD display.
h EFFECTS button
This button is used to turn eects for the selected sound on/o,
and to select the dierent eect types.
This button is also used to cancel certain USB operations.
i REVERB button
This button is used to turn reverb for the selected sound on/o,
and to select the dierent reverb types.
This button is also used to conrm certain USB operations.
j BALANCE slider
This slider adjusts the volume balance of the two layered sound
when Dual mode is selected, or the the upper and lower sections
when Split/Four Hands mode is selected.
k SPLIT button
This button is used to enable the Split/Four Hands mode
functions, allowing the keyboard to be divided into upper and
lower sections.
l TEMPO button
This button is used to adjust the tempo of the metronome time
signature/drum rhythm.
m BEAT button
This button is used to change the metronome time signature/
drum rhythm.
When pressed simultaneously, the TEMPO/BEAT buttons are also
used to adjust the volume of the metronome/drum rhythm.
n RECORDER buttons
These buttons are used to record and playback performances
stored in the instrument’s internal memory.
o TRANSPOSE button
This button is used to adjust the pitch of the keyboard in semi-
tone steps.
p USB button
This button is used to control the instrument’s USB functions.
When pressed simultaneously, the TRANSPOSE/USB buttons
are also used to access the Function Buttons.
q POWER switch
This switch is used to turn the instrument on/o.
r PHONES jacks
These jacks are used to connect stereo headphones to the
instrument. Two pairs of headphones can be connected and
used simultaneously.
s USBtoDEVICEport
This port is used to connect a FAT or FAT32 formatted USB
memory device to the instrument in order to load and save
recorded song data.
t MIDI jacks
These jacks are used to connect the instrument to electronic
devices (such as a computer or another musical instrument) in
order to send and receive MIDI data.
u USBtoHostport
This port is used to connect the instrument to a computer using
a USB ‘B to A’ type cable in order to send and receive MIDI data.
v LINE OUT jacks
These jacks are used to connect the stereo output (Left/Right
1/4” phone plug) of the instrument to external ampliers,
mixers, recording devices, and similar equipment.
w LINE IN jacks
These jacks are used to connect the stereo output (Left/Right
1/4” phone plug) from audio equipment, computers, or other
electronic devices to the instrument’s amplier and speakers.
section
12
Preparation Before Use
Setting Up the Piano
1.
Connecting the power cable to the instrument
Connect the included power cable to the ‘AC IN’ inlet located on
the underside of instrument.
2. Connecting the power cable to an outlet
Connect the instrument’s power cable to an AC outlet.
3. Turningonthepower
Press the POWER SWITCH located on the right hand side of the
front panel.
The instrument will turn on. The LED indicator for the PIANO
button will also turn on, indicating that the Concert Grand sound
is selected, and the CE220 digital piano is ready to be played.
4. Adjusting the volume
The MASTER VOLUME slider controls the volume level of the
instrument’s speakers, or headphones if connected.
Move the slider to the right to increase the volume, and to the
left to decrease the volume.
Decrease
volume
Increase
volume
Use this slider to set the volume to a comfortable listening level
- the middle is often a good starting point.
Using headphones
Use the jacks located beneath the keyboard on the left hand side,
to connect stereo headphones to the CE220 digital piano.
Two pairs of headphones can be connected and used
simultaneously. When a pair of headphones is connected,
sound will not be produced by the speakers.
Attaching the headphone hook (optional)
A headphone hook is included with the CE220 digital piano and
can be used to hang headphones when not in use.
If desired, attach the headphone hook to the underside of the
keyboard as shown in the illustration below.
section
13
Preparation Before Use
Using the Pedals
Soft pedal
Sostenuto pedal
Sustain pedal
Soft pedal (left pedal)
Depressing this pedal softens the sound, reducing its volume.
When the rotary speaker eect is selected, the soft pedal is also
used to alternate the speed of the rotary simulation between
'Slow' and 'Fast' eect modes.
Sostenuto pedal (centre pedal)
Depressing this pedal after playing the keyboard and before
releasing the keys, sustains the sound of only those notes that
have been played. Any keys that are subsequently played after
the sostenuto pedal is depressed will not be sustained.
Pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed.
Turn the bolt anti-clockwise until it makes contact with the oor
and supports the pedals rmly. If the pedal support bolt does
not make contact with the oor, the pedal board may become
damaged.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
whentheinstrumentisinitsnewposition.
Caring for the pedals
If the surface of the pedals becomes dirty, clean the pedals using a dry dish-washing sponge.
Do not attempt to clean the pedals using rust-removing solvents, abrasives or les.
Sustain pedal (right pedal)
Depressing this pedal sustains the sound after one’s hands have
been lifted from the keyboard - greatly enriching the piano
sound, while also assisting smooth ‘legato’ passages.
The sustain pedal is capable of responding to half pedaling.
Pedal support bolt
As with a grand piano, the CE220 digital piano features three pedals: sustain, sostenuto, and soft.
14
Basic Operations
The CE220 digital piano features a wide selection of realistic instrument sounds suitable for various musical styles.
Sounds are arranged into eight categories, with several sounds assigned to each category button. For a complete
listing of sounds available on the CE220 digital piano, please refer to page 68 of this owner’s manual.
By default, the ‘Concert Grand’ sound will be selected automatically when the instrument is turned on.
Selecting a sound category
Press the desired SOUND SELECTION button.
The LED indicator for the button will turn on to indicate that
this category has been selected. The variation number of the
selected sound will briey be shown in the LED display.
Variation number
Changing the selected sound variation
Several sound variations are assigned to each category button.
Press the selected category button repeatedly to cycle through
the dierent sound variations.
The
c
and d VALUE buttons can also be used to select sounds.
Concert Grand 2
Concert Grand
Studio Grand
* To change the default sound, and specify a preferred sound to be
selected automatically when the instrument is turned on, please use
the User Memory function explained on page 58.
Selected category
Press repeatedly
Method 1:
Method 2:
Selecting Sounds
15
Basic Operations
The Demo function provides an excellent introduction to the varied capabilities of CE220 digital piano. There are
18 dierent demonstration songs available, highlighting the instrument’s rich selection of high quality sounds and
powerful speaker system.
For a complete listing of available demonstration songs, please refer to page 64 of this owner’s manual.
* Kawai regrets that sheet music for Kawai original demo songs is not available.
1. Entering demo mode
Press the DEMO button.
The LED indicator for the DEMO button will turn on, and the
Concert Grand demo will start to play. The variation number of
the selected sound/demo will also be shown in the LED display.
Variation number
When the Concert Grand demo has nished, another song
selected at random will start to play automatically.
2. Selecting a demo song
While Demo mode is selected and the demo songs are playing:
Press the desired SOUND SELECTION button.
The LED indicator for the button will start to ash, and the rst
demo in the selected category will start to play.
Press the selected category button repeatedly to cycle through
the dierent demo songs.
The
c
and d VALUE buttons can also be used to select sounds.
Drawbar Organ demo
Jazz Organ demo
3.Stoppingthedemosongandexitingdemomode
Press the DEMO button while the demo song is playing.
The LED indicator for the DEMO button will turn o, the
demo song will stop, and the instrument will return to normal
operation.
Demo Songs
Selected category
16
Basic Operations
Piano Music Pieces
In addition to the sound demonstration songs, the CE220 digital piano also features a selection of popular classical
piano works from the Baroque and Romantic periods.
For a complete listing of available piano music pieces, please refer to page 65 of this owner’s manual.
1. Entering Piano Music mode
Press the PIANO MUSIC button.
The LED indicator for the PIANO MUSIC button will turn on to
indicate that Piano Music mode is in use.
2. Selecting a Piano Music piece
Press the
c
and d VALUE buttons to select the desired Piano
Music piece.
The number of the selected Piano Music piece will be shown in
the LED display.
Piano Music piece
3. Starting and stopping the Piano Music piece
Press the PLAY/STOP button.
The LED indicator for the PLAY/STOP button will turn on and the
selected Piano Music piece will start to play.
* The selected Piano Music piece can be changed during playback by
pressing the
c
and d VALUE buttons.
To stop playback, press the PLAY/STOP button again.
Adjusting the left hand/right volume balance
Move the BALANCE slider left and right to adjust the volume
balance between the left and right hand parts of the piece.
4. Exiting Piano Music mode
Press the PIANO MUSIC button again.
The LED indicator for the PIANO MUSIC button will turn o, and
playing Piano Music pieces will stop, and the instrument will
return to normal operation.
Increase
left hand
volume
Increase
right hand
volume
17
Basic Operations
The Dual Mode function allows two sounds to be layered together, creating a more complex sound.
For example, a piano sound layered with strings, or a church organ combined with a choir, etc.
Entering Dual mode
Press and hold a SOUND SELECTION button to select the main
sound, then press another SOUND SELECTION button to select
the layered sound.
The LED indicators for both SOUND SELECT buttons will turn on
to indicate that Dual mode is in use, and the respective sound
variation numbers will be shown in the LED display.
Layered soundMain sound
Changing layered sounds
To select a dierent variation for the layered sound:
Press and hold the main SOUND SELECTION button, then press
the layered SOUND SELECTION button repeatedly to cycle
through the dierent sound variations.
To select a dierent variation for the main sound:
Press and hold the layered SOUND SELECTION button, then
press the main SOUND SELECTION button repeatedly to cycle
through the dierent sound variations.
* To layer two variations assigned to the same button, press and hold a
SOUND SELECTION button, then press the
c
and d VALUE buttons.
Adjusting the main/layered sound volume balance
Move the BALANCE slider left and right to adjust the volume
balance between the main and layered sounds.
Exiting Dual mode
Press a single SOUND SELECTION button to exit Dual mode.
The instrument will return to normal operation.
hold
Example: To layer the ‘String Ensemble’ sound with
the ‘Concert Grand’ sound, press and hold the PIANO
button, then press the STRINGS button.
Example: To change the layered ‘String Ensemble’
sound to the ‘Slow Strings’ sound, press and hold the
PIANO button, then press the STRINGS button twice.
Example: To change the rst ‘Concert Grand’ sound to
the ‘Studio Grand’ sound, press and hold the STRINGS
button, then press the PIANO button three times.
Increase
layered
sound
volume
Increase
main
sound
volume
hold
x3
hold
x2
Dual Mode
18
Basic Operations
The Split Mode function divides the keyboard into two sections, allowing each section to be played with a dierent
sound. For example, a bass sound in the lower section, and a piano sound in the upper section. By default the split
point for the lower and upper sections is set between B2 and C3.
Entering Split mode
Press the SPLIT button.
The LED indicator for the SPLIT button will turn on to indicate
that Split mode is in use.
The LED indicator for the upper section sound button will turn
on, and the LED indicator for the lower section sound button
will start to ash. The respective sound variation numbers will
also be shown in the LED display.
Upper section soundLower section sound
Changing the upper/lower section sound
Press a SOUND SELECTION button to select the desired sound for the upper section.
Press and hold the SPLIT button, then press a SOUND SELECTION button to select the desired sound for the lower section.
Adjusting the upper/lower section volume balance
Move the BALANCE slider left and right to adjust the volume
balance between the main and layered sounds.
Changing the split point
Press and hold the SPLIT button, then press a key on the keyboard.
The name of the pressed key will be shown in the LED display, and will become the new split point.
* The default split point is set between keys B2 and C3.
Lowersection Uppersection
New split point
hold
Exiting Split mode
Press the SPLIT button to exit Split mode.
The LED indicator for the SPLIT button will turn o, and the instrument will return to normal operation.
Increase
lower
section
volume
Increase
upper
section
volume
Split Mode
19
Basic Operations
The Four Hands Mode function divides the keyboard into two sections in a similar way to that of the Split Mode
function. However, with Four Hands Mode enabled, the octave/pitch of each section is automatically adjusted to
create two separate 44-key instruments with the same playing range. Furthermore, the sustain (right) pedal and
soft (left) pedal act as separate sustain pedals for the respective upper and lower sections, allowing two people to
perform piano duets using a single instrument.
Entering Four Hands mode
Press and hold the SPLIT button, then press the sustain (right)
and soft (left) pedals simultaneously.
The LED indicator for the SPLIT button will turn on to indicate
that Four Hands mode is in use.
* The ‘Concert Grand’ sound will be selected for both sections, with the
upper section lowered by two octaves and the lower section raised
by two octaves.
Changing the upper/lower section sound
Press a SOUND SELECTION button to select the desired sound for the upper section.
Press and hold the SPLIT button, then press a SOUND SELECTION button to select the desired sound for the lower section.
* The Lower Octave Shift setting can be used to adjust the octave range for the Lower section.
For further information, please refer to the instructions on page 44.
Adjusting the upper/lower section volume balance
Move the BALANCE slider left and right to adjust the volume
balance between the main and layered sounds.
Changing the split point
Press and hold the SPLIT button, then press a key on the keyboard.
The name of the pressed key will be shown in the LED display, and will become the new split point.
* The default split point is set between keys B2 and C3.
Lowersection Uppersection
New split point
hold
Exiting Four Hands mode
Press the SPLIT button to exit Four Hands mode.
The LED indicator for the SPLIT button will turn o, and the instrument will return to normal operation.
Increase
lower
section
volume
Increase
upper
section
volume
Four Hands Mode
hold
Depress
the pedals
20
Basic Operations
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall. Some sound types, such as acoustic piano, enable reverb automatically in order to improve acoustic realism.
The CE220 digital piano features ve dierent reverb types.
Reverb types
Reverb type Description
Room 1 Simulates the ambiance of a living room or small rehearsal room.
Room 2 Simulates a larger room than Room 1.
Stage Simulates the ambiance of a small hall or live stage.
Hall 1 Simulates the ambiance of a concert hall or theater.
Hall 2 Simulates a larger hall or theater than Hall 1.
TurningReverbon/o
Press the REVERB button to turn reverb on/o.
The LED indicator for the REVERB button will turn on to indicate
that reverb is in use.
Changing the Reverb type
Press and hold the REVERB button, then press the
c
or d VALUE buttons to cycle through the dierent reverb types.
The name of the reverb type will be shown in the LED display.
hold
Room 1 Room 2
Stage
Hall 1
Hall 2
Release the REVERB button to select the desired reverb type.
After a few seconds, the LCD display will return to showing the variation number of the selected sound.
* Reverb settings are independent for each sound variation.
* Any changes made to the reverb type or on/o status will remain until the power is turned o.
* The reverb type will return to the default setting when the power is turned o.
* To change this default setting, and specify a preferred reverb type to be selected automatically when the instrument is turned on, please use the
User Memory function explained on page 58.
Reverb
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Technics SX-PX332/M User manual
-
Orla CDP 101 Owner's manual
-
Panasonic SXPX552 Operating instructions
-
Panasonic SXPX332 Operating instructions
-
Technics SX-P50 Owner's manual
-
-
Korg SP-500 User manual
-
Roland HP 236 User manual
-
Roland F-20 Owner's manual
-
