Escient Vision VS-100 Quick Setup Manual

Brand: Escient

Model: Vision VS-100

Type: Quick Setup Manual

This manual is also suitable for

Vision VS-200

VS Server/Player

Quick Setup Guide

6640 Intech Blvd., Suite 250

Indianapolis, IN 4627

Phone: 800-372-4368

Press "3” For Support

Mon. - Fri. 9:00am - 7pm EST

email: [email protected]

www.escient.com

Document No.: M51003-01A1

SYSTEM REQUIREMENTS:

• High Definition TV (recommended)

• A/V Receiver for surround sound

• Gigabit Ethernet network and switch

GETTING STARTED

1 Unpack the Vision

• VS Server/Player

• Power cable

• Ethernet cable

• Remote control

• Two AA batteries

• Vision User’s Manual

• This Quick Setup Guide

A) Install the two AA batteries into the remote

B) Make note of the serial number (located on the back)

SERIAL NUMBER:___________________________________________________

2 Connect the Vision to the TV and/or A/V Receiver

Select which video and audio outputs are appropriate for your system and connect the

cables from your Vision to your TV and/or A/V Receiver according to the manufacturer's

recommended inputs for a DVD player. HDMI or Component video with digital audio

should be used for the best possible quality.

3 Connect the Vision to the Home Network

Connect the Vision to your network using the included Ethernet cable. A Gigabit switch

and Cat5e or Cat6 cabling is required for serving video from your Vision VS to Vision VC

players located in other rooms of your home.

4 Power Up the Vision

A) Connect the included power cable to the Vision

B) Connect the cable to an AC outlet

Action: The Vision’s front panel LED will flash RED until the system is ready, at which

point the LED will turn BLUE and you will see the Vision user interface on your TV

Note: Vision’s startup screens are displayed on the component video output only. It may

take up to two minutes for the video to be available on the HDMI output.

Action: Press the R1 button on the remote and follow the onscreen instructions for

configuring your Vision

REMOTE CONTROL

QUICK GUIDE

HOME

Jump directly to the Main Menu

BACK

Advance back to the previous menu

UP / DOWN / LEFT / RIGHT - OK

Directional arrows to navigate and select

OPTS

Jump directly to the Options Menu

For advanced remote features, please consult the Vision

User’s Manual.

©2008 Escient. All rights reserved. Escient and the Escient logo are registered trademarks and Vision is a trademark of Escient and DNNA. All other trademarks are property of their respective owners. Escient reserves the right to change product hardware, features and

software without notice. Upon any change, materials are updated as quickly as possible, but may not be reflected in documents already distributed. Supported hardware is updated continually. If you wish to interface with hardware that is not listed on this data sheet,

please call Escient at 800.372.4368.

The Vision System is to be used only in

accordance with copyright law. Users must

confirm that they have the right to import

content before doing so.