Primera Signature Cassette Printer Owner's manual

Brand: Primera

Model: Signature Cassette Printer

Category: Print servers

Type: Owner's manual

This manual is also suitable for

Signature Slide Printer

Remove the Adhesive backing paper from the hook

and loop strips.

Position the Print Server so that the gap in the hook

and loop strips align with the seam on the back of

the printer. Press the Print server into place.

Note: If removal

of the covers or

access to the back

panel is necessary

the Print Server

can be removed by

separating the hook

and loops strips.

Connect cables as shown. USB can be connected to

any of the four ports on the Print Server.

Download the Full Installer for your printer here:

Slide Printer - http://www.primerahealthcare.

com/slideprintersupport.html

Cassette Printer - http://www.primerahealthcare.

com/cassetteprintersupport.html

Note: The latest version must be installed.

3Setup

Hook and loop strips

POWER

Gap

Back of Slide or

Cassette Printer

POWER

Ethernet

Print Server Power

(Included)

Short USB (Included)

Power

Cable

Install the Software. During installation you will

be prompted to choose USB or Network. Choose

Network. Enter the Hostname shown on your

Print Server. Follow the prompts to complete the

installation.

If setup and installation were successful, when

you open PTLab you will see the Printer Server

hostname below the printer name.

for Signature Slide Printer

and Cassette Printer

Part #511342-022216

COVER DRAWING

For the most recent version of this manual please visit

http://www.primera.com/manuals.html

POWER

Primera Signature Cassette Printer Owner's manual

Primera Signature Cassette Printer Owner's manual

This manual is also suitable for

Primera Signature Cassette Printer Owner's manual

Related papers

Other documents