Hama 00094176 Owner's manual

Type
Owner's manual
00094176_78/09.09
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
Hama GmbH & Co KG
D-86651 Monheim/Germany
www.hama.com
FlashPen
»My DISA USB-Datensaf
USB 2.0
00094176
DIGITAL
ready for Windows 7
hPen
DISA USB-Datensaf
2.0
6
Use:
The My DiSa USB data safe helps to secure your
data. It consists of 2 partitions. Partition 1, the system
partition (do not delete) and partition 2, the user
partition. With the help of this software, you can unlock
your USB stick and lock it again using your personal
password. The device locks itself automatically every
time the stick is removed from the USB port.
The device does not automatically lock if you have
permanently unlocked it.
Use:
Insert the My DiSa USB stick into a free USB port.
Please note that when you insert the device for the
rst time it can take a short while before the software
is installed onto your PC.
The My DiSa software will start automatically.
The software automatically recognizes the set
language on your PC or notebook
and appears in this language.
Select “Set New Password”
Then choose a password of your choice – you will
be asked to enter the password twice.
The background colour of the password eld
changes according to the security of the password
you have chosen.
1-3 characters – red = low security
4-7 characters – yellow = higher security
Above 8 characters – green = max. security
g Operating Instruction
7
Select “OK” to confirm.
The open lock with the green background indicates
that you can now access data from the USB data
safe. The Windows Explorer window opens
automatically.
To lock the MyDiSa USB data safe, enter your
personal password and choose “lock”.
The lock with the orange background indicates that
the device has successfully been locked.
8
If you do not lock the USB data safe by entering the
password, the stick will automatically lock when it is
removed from the drive.
Please note that this automatic locking is not active
if the device is permanently unlocked.
When the My DiSa USB data safe is inserted into
the USB port once again, you will need to enter your
password to unlock it.
To change your current password, select “change
password”.
Enter your current password and then enter the
new password twice. The background colour of the
password eld changes according to the security of
the password you have chosen.
1-3 characters – red = low security
4-7 characters – yellow = higher security
Above 8 characters – green = max. security
Select “OK” to confirm.
9
In order to open the USB data safe in such a way
that the lock function is turned on only after renewed
password entry, select “permanently unlock”.
Caution: The self-locking function is no longer
activated!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Hama 00094176 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI