Coby TFTV791 - 7" Tft LCD Tv is portable TV with a digital tuner so you can watch digital terrestrial TV. It features a 7" TFT LCD screen with 480 x 234 pixels resolution. The TV has a built-in speaker for sound output but you can also connect external speakers or headphones via 3.5mm jack. The TV has a built-in battery so you can watch TV without being plugged into an outlet. You can also connect the TV to your home network via the built-in Ethernet port or via Wi-Fi.
Coby TFTV791 - 7" Tft LCD Tv is portable TV with a digital tuner so you can watch digital terrestrial TV. It features a 7" TFT LCD screen with 480 x 234 pixels resolution. The TV has a built-in speaker for sound output but you can also connect external speakers or headphones via 3.5mm jack. The TV has a built-in battery so you can watch TV without being plugged into an outlet. You can also connect the TV to your home network via the built-in Ethernet port or via Wi-Fi.
COBY Electronics Corp.
56-65 Rust Street
Maspeth, NY 11378
www.cobyusa.com
www.ecoby.com
Instruction Manual
Please read this manual carefully before operation
Portable Widescreen TFT LCD
Digital TV with Dual ATSC/NTSC Tuner
TF-TV591
TF-TV791
TF-TV891
TF-TV1091
Page 2 Coby Electronics Corporation www.cobyusa.com Page 31
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufcient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operation and servicing instructions in the literature accompanying the
appliance.
WARNING:
To prevent re or shock hazard, do not expose this device to rain or moisture. Dangerous high voltage is present
inside the enclosure. Do not open the cabinet.
CAUTION:
Any changes or modications not expressly approved in this manual could void your authority to operate this
equipment.
FCC Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant with the
FCC Rules, Part 15. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Handling the cords on this product will expose you to lead, a chemical known to the State of Cali-
fornia to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
NOTICE:
The LCD panel used in this player contains millions of thin lm transistors that have been manufactured using a
high-technology process to deliver a crisp, clear, and detailed picture. Occasionally, a few of these transistors
may become stuck or non-active; please note that this is a normal result of the manufacturing process and does
not affect the performance of the player.
PRECAUTIONS
For recycling or disposal information about this product, please contact
your local authorities or the Electronics Industries Alliance:
www.eiae.org.
For Customer Use:
Enter below the serial number that is located on the
bottom of the unit. Retain this information for future
reference.
Model No.
Serial No.
NOTES
Page 30 Coby Electronics Corporation www.cobyusa.com Page 3
SPECIFICATIONS
Display Type TF-TV591: 5.6” TFT LCD with LED Backlight @ 320 x 234
TF-TV791: 7” TFT LCD @ 480 x 234
TF-TV891: 8” TFT LCD @ 800 x 480
TF-TV1091: 10.2” TFT LCD @ 800 x 480
TV Tuner System ATSC, NTSC
AV Output 3.5mm Headphone
High-Output Stereo Speakers
AV Input Composite Video
Stereo Audio
Coaxial Antenna
Operating Conditions 32°F–113°F
Power DC 9V 2A
Design, specications, and manual are subject to change without notice.
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions: All the safety and operating instructions should be read before the prod-
uct is operated.
Retain Instructions: The safety and operating instructions should be retained for future
reference.
Heed Warnings: All warnings on the product and in the operating instructions should be
adhered to.
Follow Instructions: All operating and usage instructions should be followed.
Cleaning: For your safety, always unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a dry or slightly damp (not wet) cloth for
cleaning or dusting.
Attachments: Use only attachments recommended by the manufacturer. Use of other at-
tachments may be hazardous.
Accessories: Do not place this product on an unstable cart, stand, tripod,
bracket, or table. Use only with carts, stands, tripods, brackets, or tables
recommended by the manufacturer or sold with the product. Any mount-
ing of the product should follow the manufacturer’s instructions and
should use a mounting accessory recommended by the manufacturer.
A product and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the product
and cart combination to overturn.
Water and Moisture: Water is a natural conductor of electricity. To avoid the possibility of
shock or severe injury, do not use this product in or near any sources of water (e.g., a bath
tub, washbowl, kitchen sink, laundry tub, in wet basements, a swimming pool and the like).
Object and Liquid Entry: Never push objects of any kind into this product, through openings
or otherwise; this may result in objects touching dangerous voltage points or short-out parts
that could result in a personal or property damage or injury, including re or electric shock.
Never spill liquid of any kind on the product.
Ventilation: Any electrically powered consumer electronic product generates heat while in
use, thereby requiring proper ventilation. To ensure reliable operation of the product and to
protect it from overheating, do not operate the product on a bed, sofa, rug, or other similar
soft surface, and never block any ventilation slots or openings provided for the unit. This
product should not be operated in any enclosed area such as a cabinet, bookcase or rack
unless proper ventilation is provided for the unit.
Heat: The product should be situated away from any heat sources such as radiators, heat
registers, stoves, or other products (including ampliers) that produce heat.
Power Sources: This product should be operated only from the type of power source indi-
cated on the rating label. If you are not sure of the type of power supply to your home, consult
your product dealer or local power company. For products intended to operate from battery
power or other sources, refer to the operating instructions.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Page 4 Coby Electronics Corporation www.cobyusa.com Page 29
Grounding or Polarization: This product may be equipped with a polarized alternating-
current line plug that has one blade wider than the other. This plug will only t into the power
outlet in one direction. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the direction of the plug. If the plug should still fail to t, your outlet may
be obsolete; contact a licensed electrician to replace it. Never attempt to defeat the safety
purpose of the polarized plug.
Power-Cord Protection: Care must be taken to ensure that power supply cords are routed
so as to avoid being damaged, such as by being walked on or pinched by items placed upon
or against them. You should pay particular attention to cords at plugs, convenience recep-
tacles, and at the point where they exit from the product.
Protective Attachment Plug: The product may be equipped with an attachment plug with
overload protection. This is a safety feature. See the operating instructions for replacement
or directions to reset the protective device. If replacement of the plug is required, please
consult an authorized service technician, and make sure s/he has used a replacement plug
that has the same overload protection as the original plug as specied by the manufacturer.
Outdoor Antenna Grounding: If an outside antenna is connected to the product, be sure
the antenna system is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70 provides
information with regard to proper grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode (see gure).
Lightning: Lightning can cause power surges, which may damage or destroy your product.
For added protection, unplug it from the wall outlet and disconnect the antenna or cable sys-
tem during a lightning storm or when it is left unattended and unused for long periods of time.
Power Lines: An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact with them might be fatal.
14.
15.
16.
17.
18.
IMPORTANT SAFETY INSTRUCTIONS
TROUBLESHOOTING
are not damaged.
The picture color is distorted.
Try resetting the LCD Mode options.
Ensure that all connections are secure and correct, and that the cables
are not damaged.
The picture is not full-screen or is stretched wide.
In ATV mode, press LCD MODE to change the aspect ratio settings. In
DTV mode, press FORMAT to change the aspect ratio settings.
There is no sound or distorted sound.
Ensure that the MUTE function is not engaged.
Ensure that the volume level is not too low.
The current channel may not be in reception range. Try repositioning the
antenna, or tune to a different channel.
The remote control doesn’t work.
Ensure that the Power Switch has been physically set to the ON position.
Ensure that there are no obstacles between the remote and the player.
Point the remote at the remote sensor on the main unit.
Ensure that the batteries in the remote retain a charge and have been
installed correctly.
Try replacing the remote’s batteries.
The player has malfunctioned.
Unplug the unit. After 30 minutes, plug in and power on the player—the
restore function should reset the player.
•
•
•
•
•
•
•
•
•
•
•
•
Page 28 Coby Electronics Corporation www.cobyusa.com Page 5
TROUBLESHOOTING
If you have a problem with this unit, please read the troubleshooting guide below
and check our website at www.cobyusa.com for Frequently Asked Questions
(FAQs) and rmware updates. If these resources do not resolve the problem,
please contact Technical Support.
COBY Electronics Technical Support
56-65 Rust Street
Maspeth, NY 11378
Hours: 8:00 AM–11:00 PM EST, seven days a week.
Phone: 718-416-3197, 800-681-2629, or 800-727-3592
Email: techsupport@cobyusa.com
Web: www.cobyusa.com
There is no power to the device.
Ensure that the Power Switch on the main unit is physically set to the ON
position.
Ensure that the AC adapter cord is securely connected to the player and the
proper wall outlet.
There is no picture.
Ensure that the TV set has been powered on and is set to the correct
mode (DTV, ATV, or AV).
The current channel may not be in reception range. Try repositioning the
antenna, or tune to a different channel.
Ensure that all connections are secure and correct, and that the cables
are not damaged.
The picture is noisy or distorted.
If an antenna is in use, try repositioning it for better reception.
Ensure that all connections are secure and correct, and that the cables
•
•
•
•
•
•
•
Overloading: Always operate any electrical device in accordance with applicable electrical
codes. Never overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of personal or property damage or injury, including re or electric
shock.
Servicing: Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards, including the risk of injury or dam-
age to persons or property. Your warranty will also be voided. Refer all servicing to qualied
service personnel.
Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to
qualied service personnel if: a) the power-supply or plug is damaged in any way; b) liquid
has been spilled or if objects have fallen or been introduced into the product; c) the product
has been exposed to rain, water or other sources of moisture; d) the product does not operate
normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as improper adjustment of other controls may result in damage
and/or require extensive work by a qualied service technician to restore the product to its
normal operation; e) the product has been dropped or damaged in any way; f) the product
exhibits a distinct change in performance indicative of a need for service.
Replacement Parts: When replacement parts are required, be sure that your service techni-
cian has used replacement parts specied by the manufacturer or have the same charac-
teristics as the original part. Unauthorized substitutions may result in injury to property or
persons including the risk of re, electric shock, or other hazards, and your warranty will be
voided.
Safety Check: Upon completion of any service or repairs to this product, ask the service
technician to perform appropriate safety checks to ensure that the product is in proper op-
erating condition.
Wall or Ceiling Mounting: the product should only be mounted to a wall or ceiling only as
recommended in this Manual.
19.
20.
21.
22.
23.
24.
IMPORTANT SAFETY INSTRUCTIONS
Page 6 Coby Electronics Corporation www.cobyusa.com Page 27
TABLE OF CONTENTS
PRECAUTIONS ..................................................................................................2
IMPORTANT SAFETY INSTRUCTIONS ...............................................................3
TABLE OF CONTENTS .......................................................................................6
PACKAGE CONTENTS......................................................................................8
FEATURES .........................................................................................................9
CONTROLS AT A GLANCE ............................................................................10
Main Unit: Top View ......................................................................................10
Main Unit: Left View ...................................................................................... 11
Remote Control ............................................................................................. 12
CONNECTIONS .............................................................................................14
Power .............................................................................................................. 14
AC Adapter ............................................................................................. 14
Rechargeable Battery Pack ................................................................. 15
DC Car/Boat Adapter ........................................................................... 16
Power Management ............................................................................. 16
TV Antenna .................................................................................................... 17
Using the Telescopic Antenna .............................................................. 17
Using an External Antenna ................................................................... 17
Optional Audio/Video Connections.......................................................... 18
Using Headphones or Earphones ........................................................ 18
Audio/Video (AV) Input ......................................................................... 19
GETTING STARTED ........................................................................................ 20
Basic Operations ...........................................................................................20
Basic TV Controls ...........................................................................................20
General Options ........................................................................................... 21
DTV MODE .................................................................................................... 22
DTV Function Controls ..................................................................................22
DTV System Menu .........................................................................................23
Channel Setup Menu ............................................................................23
ATV MODE .....................................................................................................25
ATV Function Controls ..................................................................................25
ATV System Menu .........................................................................................25
AV MODE
All instructions refer to the remote control unless indicated otherwise.
Set the unit to AV mode to watch video with audio from external AV devices
equipped with RCA AV output jacks (e.g., DVD players, VCRs, game con-
soles, etc.)
Prepare the AV Input and power connections (see the “Connections”
section for details).
Set the Power Switch to the “ON” position to turn the TV on.
Press until the unit displays “AV” on the screen to set the unit to AV
mode.
Turn on your external AV device. The video output signal should be view-
able on the TV screen.
1.
2.
3.
4.
Page 26 Coby Electronics Corporation www.cobyusa.com Page 7
Menu Item Description
AIR/CATV
Set the antenna system.
AIR: Over-the-air broadcasts.
CATV: Cable or Satellite broadcasts.
•
•
AUTO PROGRAM Search for and store all available broadcast channels.
CHANNEL Select a channel to adjust.
SKIP
Add or remove the selected channel from the Channel List.
On: Remove the selected channel from the Channel List.
Off: Add the selected channel from the Channel List.
Channels removed from the Channel List will be skipped
when pressing or to change the channel.
You can still tune to these skipped channels by using the
numeric keypad.
•
•
ATV MODE
AV MODE .......................................................................................................27
TROUBLESHOOTING ..................................................................................... 28
SPECIFICATIONS .......................................................................................... 30
TABLE OF CONTENTS
Page 8 Coby Electronics Corporation www.cobyusa.com Page 25
PACKAGE CONTENTS
Please make sure the following items are included in the package. If any items
are missing, contact your local dealer.
Coby Portable Television
Remote Control
AV Cable
Telescopic Antenna
100-240V AC Adapter
Car/Boat DC Adapter
•
•
•
•
•
•
ATV MODE
All instructions refer to the remote control unless indicated otherwise.
Set the unit to ATV mode to watch Analog TV (NTSC) broadcasts.
Press to set the unit to ATV mode.
Broadcast reception quality will vary depending on geographic location
and antenna orientation.
For indoor installations, remove the telescopic antenna and connect an
external antenna or cable/satellite line to the Coaxial Antenna jack.
ATV Function Controls
Please refer to the “Getting Started > Basic TV Controls” section.
The Electronic Program Guide, Favorite Channels List, Channel List,
and Format functions are not available in ATV mode.
ATV System Menu
While the unit is in ATV mode, press to
access the ATV System Menu in order to
adjust the DTV mode settings.
To select an option, press or .
To adjust a selected option, press
or .
To enter a selected option (when applicable), press .
•
•
•
•
Page 24 Coby Electronics Corporation www.cobyusa.com Page 9
Menu Item Description
Channel Select a channel to adjust.
Skip
Add or remove the selected channel from the Channel List.
On: Remove the selected channel from the Channel List.
Off: Add the selected channel from the Channel List.
Channels removed from the Channel List will be skipped
when pressing or to change the channel.
You can still tune to these skipped channels by using the
numeric keypad.
•
•
Favorite List
Add up to ve channels to the Favorite Channels list.
To select a Favorite Channel slot (Fav.1 to Fav.5),
press or .
To set the channel in the selected slot, press or .
Only channels from the Channel List may be added to
the Favorite Channel List.
•
•
DTV MODE FEATURES
Portable Digital TV with Widescreen TFT LCD Color Display
ATSC and NTSC Tuner Receives Digital and Analog TV Broadcasts
Integrated Telescopic Antenna
Coaxial Antenna Input for use with External Antenna Sources
AV Input for use with Video Games, VCRs, or other AV Sources
Headphone Jack for Private Listening
High-Output Stereo Speakers
Integrated Viewing Stand
Rechargeable Lithium-ion Battery
Three-Way Power: AC/DC/Battery Operation
•
•
•
•
•
•
•
•
•
•
Page 10 Coby Electronics Corporation www.cobyusa.com Page 23
CONTROLS AT A GLANCE
Main Unit: Top View
1
3
2
4
DTV/ATV/AV
6
8
7
9
11
10
5
12
Telescopic Antenna
Coaxial Antenna Jack
LCD Display Screen
Stereo Speakers
Power Indicator
Mode (DTV/ATV/AV)
1.
2.
3.
4.
5.
6.
Menu
Volume Down
Volume Up
Channel Down
Channel Up
Remote Sensor
7.
8.
9.
10.
11.
12.
DTV System Menu
While the unit is in DTV mode, press to
access the DTV System Menu in order to
adjust the DTV mode settings.
To select an option, press or .
To adjust a selected option, press
or .
To enter a selected option (when ap-
plicable), press .
Menu Item Description
AIR/CATV
Set the antenna system.
AIR: Over-the-air broadcasts.
CATV: Cable or Satellite broadcasts.
•
•
AUTO PROGRAM Search for and store all available broadcast channels.
CHANNEL
Access the Channel Setup menu. See the “Channel Setup” sec-
tion for details.
Channel Setup Menu
Enter the Channel Setup menu from the DTV
System menu.
To select an option, press or .
To adjust a selected option, press or .
To enter a selected option (when appli-
cable), press .
•
•
•
•
•
•
DTV MODE
Page 22 Coby Electronics Corporation www.cobyusa.com Page 11
DTV MODE
All instructions refer to the remote control unless indicated otherwise.
Set the unit to DTV mode to watch Digital TV (ATSC) broadcasts.
Press to set the unit to DTV mode.
Broadcast reception quality will vary depending on geographic location
and antenna orientation. Please visit http://www.AntennaWeb.org for
more information.
For indoor installations, remove the telescopic antenna and connect an
external antenna or cable/satellite line to the Coaxial Antenna jack.
DTV Function Controls
In addition to the basic TV controls (see the section “Getting Started”), the fol-
lowing functions are available in DTV mode.
Remote Key Function
Display the DTV Electronic Program Guide.
To view the next page (when available), press or .•
Display the Channel List of available stations.
To select a channel, press or .
To change to the selected channel, press .
To view the next page (when available), press or .
•
•
•
Cycle through your Favorite Channels (up to ve).
Add channels to the Favorite Channels list from the DTV System menu.
If no channels have been added to the Favorite Channels list, the
Favorite Channels setup screen will be displayed.
•
•
Adjust the aspect ratio (Normal, Crop, Letterbox, Squeeze).
To adjust the option, press or .•
•
CONTROLS AT A GLANCE
Main Unit: Left View
1
5
2
3
4
Power Switch (On/Off)
DC Power In
Video In
1.
2.
3.
Audio In
Headphone Out
4.
5.
Page 12 Coby Electronics Corporation www.cobyusa.com Page 21
Remote Control
CONTROLS AT A GLANCE
6
15
17
18
20
5
4
3
2
19
14
16
7
11
12
9
8
1
13
10
Power/Standby
Channel Up
Channel Down
Volume Up
Volume Down
Channel Input
Numeric Keypad
Return
Menu
Navigation Keypad:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
LCD Mode
E-Program Guide
Favorites
Info
Channel List
Exit
Format
On-Screen Display
Mode
Mute
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
General Options
Remote Key Function
Adjust the LCD display settings.
Press to access the LCD Mode menu.
To select an option, press or .
To adjust the selected option, press or .
When SCREEN is selected, press or to set the screen aspect
ratio as 16:9 (widescreen) or 4:3 (standard).
When is selected, press or to adjust the brightness.
When is selected, press or to adjust the contrast.
When is selected, press or to adjust the color.
When RESET is selected, press to conrm and return all LCD
display options to their default settings.
•
•
•
•
•
•
•
Adjust the On-Screen Display language (English, French, Spanish).
To adjust the option, press or .•
Display the current status information.
GETTING STARTED
Page 20 Coby Electronics Corporation www.cobyusa.com Page 13
GETTING STARTED
All instructions refer to the remote control unless indicated otherwise.
Basic Operations
Prepare the connections and power supply.
Set the Power Switch to the ON position to turn the unit on.
Set the TV mode.
To set the TV mode, press .
DTV: View Digital TV broadcasts.
ATV: View Analog TV (standard) broadcasts.
AV: View external AV devices connected to the Audio and Video In jacks.
Basic TV Controls
To control basic TV functions:
Remote Key Function
Change the channel up.
Change the channel down.
ATV Mode
Press to set the channel input mode to accept either a single digit,
double digit, or triple digit channel number.
Use the numeric keypad to enter a channel number.
DTV Mode
Use the numeric keypad to enter a main channel and then press .
Use the numeric keypad to enter a sub-channel.
Press to conrm
•
•
•
•
•
Return to the previous channel.
Increase the volume level.
Decrease the volume level.
Mute (disable) volume output.
1.
2.
•
•
•
CONTROLS AT A GLANCE
The remote control transmits a directional infrared beam. Be sure to aim the
remote control directly at the infrared remote sensor during operation. The sen-
sor may not be able to receive signals properly if the sensor is covered, if there
is a large object between the remote control and the sensor, or if it is exposed
to direct sunlight or a strong articial light (e.g., uorescent or strobe lights). In
this case, change the direction of the light or reposition the unit to avoid direct
lighting.
To use the remote, point it at the
remote sensor of the player. Op-
erate the remote within 15 feet of
the sensor and at an angle of ±60
degrees.
To install batteries in the remote
control, refer to the diagram. Re-
move the battery compartment
cover located on the rear of the
remote control. Insert batteries,
making sure to match their polari-
ties (+/-) to the markings on the in-
side of the compartment. Replace
the cover.
Batteries in the remote will last for
approximately 1 year. Replace the
batteries if the remote control does
not work. Do not mix old with new
batteries, or different types of bat-
teries.
Remove the batteries from the remote if it will not be used for a long period
of time.
The batteries used in the remote control may present a re or chemical
burn if mistreated. Do not recharge, disassemble, incinerate, or heat
the battery (~212ºF).
Keep batteries away from children.
•
•
•
•
Page 14 Coby Electronics Corporation www.cobyusa.com Page 19
CONNECTIONS
Power
AC Adapter
This unit should be used with AC 100-240V 50/60Hz wall outlets, only. Com-
plete all system connections (optional) before connecting the power.
Connect one end of the supplied AC adapter into the DC IN jack of the play-
er. Connect the other end of the adapter into an AC 100-240V wall outlet.
The AC adapter operates on AC 100-240V ~50/60Hz (DC Out: 9V; DC
Current: 0.5A maximum).
To DC IN Jack
To AC 100-240V
Wall Outlet
Do not connect the power plug to a power outlet other than that which
is indicated here and on the label as this may result in the risk of re or
electric shock.
Do not handle the power plug with wet hands. Doing so may cause
electric shock.
Only use AC adapters of the type specied here. Failure to do so may
case a re or damage the player.
•
•
Audio/Video (AV) Input
Your unit can be used as a monitor to display video and audio from external AV
devices equipped with RCA AV output jacks (e.g., DVD players, VCRs, game
consoles, etc.)
AV Output Panel of Device
AV Cable
YELLOW
RED
WHITE
To VIDEO IN To AUDIO IN
AUDIO
OUTPUT
VIDEO
OUTPUT
Using an AV patch cable, connect the unit’s Video In jack to the Compos-
ite Video Out jack (yellow) of your AV device.
Using an AV patch cable, connect the unit’s Audio In jack to the RCA
Stereo Out jacks (red and white) of your AV device.
Power on the unit and the AV device.
To set the unit to AV mode, press .
An AV patch cable (included) is required for Audio/Video input
connections.
1.
2.
3.
4.
CONNECTIONS
Page 18 Coby Electronics Corporation www.cobyusa.com Page 15
Optional Audio/Video Connections
There are various connection options depending on your equipment; please
refer to the documentation supplied by the manufacturer of your Audio/Video
equipment for more connection information as necessary.
Using Headphones or Earphones
Your player can output audio to a pair of headphones or earphones for private
listening during playback.
Headphones or Earphones
To PHONE OUT
Lower the volume of the unit.
Connect a pair of headphones or earphones terminating in a 3.5mm plug
to the Headphone Out jack of the unit.
Increase the volume gradually until a comfortable level has been reached.
Audio output to the integrated stereo speakers will stop automatically
when headphones are connected.
Hearing experts advise against the constant use of personal stereos
played at high volume. Constant high volume use can lead to hearing
loss. If you experience ringing in the ears or hearing loss, discontinue
use immediately and seek medical advice.
1.
2.
3.
CONNECTIONS CONNECTIONS
Rechargeable Battery Pack
This unit may be powered by a rechargeable battery when an AC outlet is not
available.
To install the battery pack:
This unit comes preinstalled with a 7.4V lithium-ion rechargeable battery pack.
If the integrated battery pack does not work to your expectations, please con-
tact Coby Technical Support or a qualied service technician.
To charge the battery pack:
Connect one end of the supplied AC adapter into the DC IN jack of the
player (or the Battery Recharge jack if applicable).
Connect the other end of the adapter into an AC 100-240V wall outlet.
A new or exhausted battery pack should be charged fully (minimum 4
hours) before its initial use to ensure optimum lifetime performance.
Disconnect the battery as soon as it has been charged. Leaving it con-
nected may result in reduced battery performance.
Use only the battery supplied with this player.
Do not short the terminals. Do not open the terminal covers of the player.
Do not allow dust to come into contact with the terminals of the player
and battery.
Do not disassemble, puncture, impact, heat, or incinerate the battery.
Do not leave the battery or player in a car with its windows closed or
any place subject to direct sunlight.
Keep the battery dry.
Dispose of used batteries properly.
1.
2.
Page 16 Coby Electronics Corporation www.cobyusa.com Page 17
DC Car/Boat Adapter
This unit may be powered using the supplied DC Car/Boat adapter when an AC
outlet is not available.
Connect one end of the supplied DC adapter into the DC IN jack of the player.
Connect the other end of the adapter into a car/boat cigarette lighter socket.
To Car Cigarette
Lighter Socket
To DC IN Jack
When using the player in a moving vehicle, route the cords so that they
will not interfere with the driver.
Some states restrict the use of monitors and televisions in vehicles.
Where use is permitted, install the unit so that the display will not be
viewable by the driver.
Power Management
If the player will not be in use for a long period of time, turn the player off, unplug
the player, and remove any batteries, as applicable.
When disconnecting the AC power cord (mains lead), grasp the plug
itself and not the cord.
•
CONNECTIONS
TV Antenna
To view broadcast television channels, a signal must be received by the unit
from either the telescopic antenna or an external antenna.
Broadcast reception quality will vary depending on geographic location
and antenna orientation. Please visit http://www.AntennaWeb.org for
more information.
Using the Telescopic Antenna
The telescopic antenna is designed for outdoor broadcast reception.
To Coaxial Antenna Jack
Telescopic Antenna
To install the telescopic antenna, screw it into the Coaxial Antenna jack.
For best reception, extend the antenna and adjust its orientation.
Using an External Antenna
For indoor installations, remove the telescopic antenna and connect an external
antenna or cable/satellite line to the Coaxial Antenna jack.
•
•
CONNECTIONS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Coby TFTV791 - 7" Tft LCD Tv User manual
- Type
- User manual
- This manual is also suitable for
Coby TFTV791 - 7" Tft LCD Tv is portable TV with a digital tuner so you can watch digital terrestrial TV. It features a 7" TFT LCD screen with 480 x 234 pixels resolution. The TV has a built-in speaker for sound output but you can also connect external speakers or headphones via 3.5mm jack. The TV has a built-in battery so you can watch TV without being plugged into an outlet. You can also connect the TV to your home network via the built-in Ethernet port or via Wi-Fi.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Coby COBY CA781 Quick start guide
-
COBY electronic TF-TV3207 User manual
-
-
-
COBY electronic KTF-DVD7093 User manual
-
-
-
COBY electronic COBY CVM220 User manual
-
-
Other documents
-
-
-
-
-
-
-
-
-
-
Marshall Electronics V-LCD5.6-PRO User manual