Generation Lighting VS13703-DBZ Installation guide

Brand
Generation Lighting
Model
VS13703-DBZ
Type
Installation guide
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE OR
CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before assembly. Bulbs
not included.
1. Follow enclosed supplement installation instructions for
electrical and fixture installation onto house outlet box. If
you do not have an outlet box at desired location to attach
the fixture than hire a qualified electrician to create one.
2. Install shade and bulb:
A. Place round glass plate over round metal plate.
B. Secure with counter ring. Do not over tighten.
C. Install bulb (not included). See relamping label located near
socket area for type and maximum allowed wattage.
NOTE: Make certain not to handle lamp with bare hand
since this will cause lamp to shatter at high heat. Handle with
clean soft cloth.
D. Place lower ring onto glass plate.
E. Place shade onto lower ring.
F. Place upper ring onto shade.
G. Install shade by placing over glass plate.
Assembly Instructions For
VS13702, VS13703, VS13704
Socket
Bulb (not included)
Shade
Glass Dome
Counter Ring
Fixture Plate
Mounting Plate
(E) 4/08
Upper Ring
Lower Ring
Glass Plate
Metal Plate
Cap Nuts
  • Page 1 1

Generation Lighting VS13703-DBZ Installation guide

Brand
Generation Lighting
Model
VS13703-DBZ
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents