Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting Setup → Plug & Play.
On the screen, you can set as follows.
The each step may vary depending on the Antenna source.
N
Plug & Play
Select the OSD Language.
E
Enter
Menu Language
: English
►
Step 1
Plug & Play
Select the Antenna source to memorise.
Air
Cable
Start
U
Move
E
Enter Skip
Start
Step 4
Step 3
Plug & Play
Select Country.
E
Enter
Country
: United Kingdom
►
Step 2
Plug & Play
Select ‘Home Use’ when installing this TV in your
home.
Store Demo Home USE
L
Move
E
Enter
Step 9
Enjoy your TV.
OK
Step 5
Plug & Play
Select the Channel source to memorise.
Digital & Analogue
Digital
Analogue
Start
U
Move
E
Enter Skip
Start
Start
Step 6
Plug & Play
Auto Program in Progress.
Stop
3%
Channel 10
Digital Channels : 0 Analogue Channels : 0
Step 8
Plug & Play
Set the Clock Mode.
E
Enter Skip
Clock Mode
: Auto
►
E
Enter Skip
Step 7
Plug & Play
How to get the best performance from your new HDTV.
Step 1. Connect the HD box to the TV using the Component video (Red,Green,
Blue) and audio (Red, White) cables or HDMI Cable.
▼
HD box
▼
TV rear view
E
Enter
Step 2. Press the Source button on the Remote to select HDMI or Component
Input.
Depending on your location, HD programming may also be viewed using an RF antenna.
For more details, please refer to HD Connections in the Owner Manual.
HDMI Cable
Component Cable
BN68-02282A.indd 3 2009-04-09 오후 3:35:26